Ubuntu Installation :: NVidia 195 Will Not Install Via Apt-Get On 9.10
Feb 18, 2010
Code:
debox@debox-htpc:~$ sudo apt-get install nvidia-glx-195
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed
nvidia-glx-195
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/19.8MB of archives.
After this operation, 61.2MB of additional disk space will be used.
(Reading database ... 129752 files and directories currently installed.)
Unpacking nvidia-glx-195 (from .../nvidia-glx-195_195.36.03-0ubuntu1~karmic~nvidiavdpauppa2_i386.deb) ...
dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead.
dpkg-divert: `diversion of /usr/lib/libGL.so.1 to /usr/lib/nvidia/libGL.so.1.xlibmesa by nvidia-glx-195' clashes with `diversion of /usr/lib/libGL.so.1 to /usr/lib/nvidia/libGL.so.1.xlibmesa by nvidia-glx-185'
dpkg: error processing /var/cache/apt/archives/nvidia-glx-195_195.36.03-0ubuntu1~karmic~nvidiavdpauppa2_i386.deb (--unpack):
subprocess new pre-installation script returned error exit status 2
Errors were encountered while processing:
/var/cache/apt/archives/nvidia-glx-195_195.36.03-0ubuntu1~karmic~nvidiavdpauppa2_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
debox@debox-htpc:~$
No idea what's going on here, dpkg is broken?
View 9 Replies
ADVERTISEMENT
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Jul 7, 2010
I've been trying for a couple days to install Ubuntu 10.04 on my desktop after using for a couple months on my laptop.My desktop has an Asus M2N32-SLI mobo, with a single 100GB HDD.I currently have Win7 installed and have resized the partitions using gparted from within the Ubuntu LiveCD.When I start the install from the icon on the desktop it goes until it asks where to install and then it doesn't show any drives at all.Most of the things I see pertaining to the nvidia chipset and HDDs talks about RAID. But I am not running any kind of RAID. Just a single HDD.
View 9 Replies
View Related
Apr 3, 2011
I am trying to install Ubuntu 10.10 desktop alongside windows 7 on my 2TB Nvidia Raid 0 HDD's but when i select where to install the OS on the ubuntu installation it sees through the raid and only shows the HDD's and no partitions. is there any way to install ubuntu without having to take off Raid?
View 9 Replies
View Related
Oct 8, 2010
Being a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
-Multimedia-
Audio Adapter: HDA-Intel - HDA NVidia
Audio Adapter: HDA-Intel - HDA NVidia
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
View 9 Replies
View Related
Nov 1, 2010
I recently downloaded and installed Ubuntu 10.10. I thought it was awesome...still do. OK, the problem is i was prompted to install some proprietary drivers and so i did but thats when the problems started. After reboot i couldn't get the GUI or gdm (not sure what to refer it to) to work. It goes directly to a terminal screen every time so i actually reinstalled Ubuntu and tried installing the drivers all different ways but no luck. i also can get into recovery mode and do low graphics. the driver version im trying to get working is nvidia 260.19.12. my graphics card is a geforce 7 series cant remember the number i have a 32bit processor.
View 9 Replies
View Related
Sep 1, 2011
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies
View Related
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
May 10, 2010
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
View 4 Replies
View Related
May 23, 2010
I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:
Code:
2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use
2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use
[code]....
View 2 Replies
View Related
Jul 18, 2010
I've been trying to install the latest driver NVIDIA-Linux-x86_64-256.35.run. I do ctrl+alt+f1 and login, then sudo sh ./NVIDIA-Linux-x86_64-256.35.run and it gives me the license agreement, but after I accept and right after it gets to 100% it says it can't install the kernel or access or whatever. Has anyone done this installation and had the same problem but figured it out??
View 4 Replies
View Related
Nov 9, 2010
I've seen may similar issues to mine, but some are different and others are identical, but have been resolved since in the repositories. I install Maverick from CD, reboot, update via update manager, reboot, install nVidia driver via additional hardware gui, reboot and I can't get into X, I get tty1 instead with a text login prompt.
dmesg tells me:
Code:
nvidia: probe of 0000:01:00.0 failed with error -1
purging nvidia-* and deleting /etc/X11/xorg.conf means that I can get back into X, but without any hardware drivers.
I have both an onboard and PCI-E nVidia graphics adapters but my PCI-E one is primary.
View 2 Replies
View Related
Nov 20, 2010
It's been quite a run-around trying to get the Nvidia driver working.I have already followed a lot of instructions, at least onceI still get caught at "the pre-install script failed". When I looked at the script itself, it says it's "triggering an error status to prevent the installer from overwriting ubuntu's nvdia packages."Some say this script can be ignored, but it seems to be the only thing keeping my install from working.Some say install from root prompt, some say GUI OK. Some say d/l from NVIDIA, some from repository. I have been doing root, init 3, removing old drivers, etc..
View 9 Replies
View Related
Jun 2, 2011
I am currently with Wubi 10.04 under Vista and my Dell XPS 630i has a 1 TB Nvidia RAID controller.First image (Option A) suggests /dev/sda as device for boot loader installation, while second image (Option B) suggests /dev/mapper/nvidia_bcidhdja.I think that the way of keeping the RAID would be using Option B as the device for boot loader installation. Would Option A break the RAID instead?
View 1 Replies
View Related
Dec 12, 2010
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies
View Related
Nov 3, 2010
This was my first experience with Ubuntu, I was told to switch the hard drives on my computer and put the Windows drive in a safe place for the install. The first time I did the install on the hard drive (which was the clean second hard drive that came with my computer), I either didn't realize I believe I didn't realize I had to click a button and thought the install had gotten stuck, and therefore cut off the install midway through. The second time around the install went without a hitch, and I was able to boot to desktop once. There, I was notified that I needed/should install NVIDIA drivers, I believe version 173 was listed as the next most recent drives (the other was "current"), I have an NVIDIA GeForce 7350LE graphics card, and after installing the drivers, I went to the restart menu as directed and clicked restart, not shut down but restart, and there were several listed errors on the text/DOS screen, shutdown errors I believe (the errors were 5 digits and were something like 56759 or something like that, I can't be certain if I'm remembering right, though, but there were two errors going over again). I then proceeded to turn off the computer manually, and upon it coming on again, instead of the normal Ubuntu flash screen before login, a more choppy Ubuntu 10.10 screen popped up and it led me to the DOS mode, where I was able to login, but it did me no good because I don't know command logic for Ubuntu. The best I did (its the best I ever do when these things happen) is get menus to pop up that are basically useless. I turned the computer off and on again three times, and tried booting directly from disk, but that failed.
I'm actually using the same computer I just reinserted the Windows drive back in after the frustrating experience. Windows has been giving me problems itself, and I really wanted to switch to Ubuntu but I need to know that this is a fluke and not the norm. I can live with this sort of thing being so uncommon I must have did something that was very strange and out of the ordinary to my computer. But if its commonplace, I want to know that too, because that's just something I can't live with.
View 2 Replies
View Related
Nov 8, 2010
I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21
View 9 Replies
View Related
Mar 23, 2011
This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.
Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.
View 5 Replies
View Related
Sep 19, 2015
I've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.
View 2 Replies
View Related
Dec 10, 2010
I've followed leigh's installation instructions for the nVidia drivers on Fedora 14, and everything seemed to go smoothly, but I don't see any obvious changes after rebooting (should I?).When I go to KDE's KInfocenter (KMenu -> Applications -> System -> Info Center) and check the driver information I see this:
Code:
Vendor Mesa Project
Renderer Software Rasterizer
[code]....
View 2 Replies
View Related
Feb 25, 2011
how do you install an nVidia video driver?
View 1 Replies
View Related
Jul 23, 2011
The nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies
View Related
Dec 8, 2010
I would like to build up a multi boot system with 11.3 on ASUS M2N32 WS motherboard inclusive NVIDIA nForce 590 SLI RAID controller and Marwell 88SE614xSATA connectors.The problem is that if I built up the RAID-1 arrays (2x500, 2x1000) it cannot be seen from Suse install. As far as I investigated the nForce driver is in 11.3, but in this case why the installation hangs (no reset button, only power off). Sorry I cannot provide you a log, becuase the installation procedure goes to the restart, the system restarts, and Grube says error 15 or 21.
View 2 Replies
View Related
Jan 24, 2011
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies
View Related
Jan 2, 2010
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
View 4 Replies
View Related
Mar 17, 2009
Fedora Core 8 did not recognize my Geforce 7150M display adapter (in a HP DV6000 laptop), neither did Fedora Core 10 I tried yesterday although this laptop is now already over one year old (I have used Vista because it works out of the box but it sucks as you might have guessed). That could be something I'd like to complain about but I choose not to, I simply want to know how to install Fedora 10 from a live CD (that is all I have now, no DVDs and not too much cash to buy some..) Live CD boots and I can access command line. If I have understood correctly, Nvidia proprietary driver supports my display adapter but it is not included in live cd so I could use X after installation. Problem is that I don't know how to successfully run the installer from text mode. I tried to execute 'anaconda' but it cannot find packages to install when it comes to that. There seem to be no instructions how to install from a live CD that I could find using Google. For sure someone knows what command to execute to begin installation?
View 2 Replies
View Related
Nov 16, 2010
I just installed F14 which generally went well. I then did an install of kmod-nvidia and now the system hangs on start up. I see a couple of warnings and failures regarding the nvidia.ko module, and then the startup script stops after Starting atd: [OK] The screen flashes a couple of times and then is non-responsive. I can't even seem to get to the command line to back out the kmod-nvidia installation.
View 8 Replies
View Related
Sep 25, 2009
I was recently able to obtain a new laptop at work. Rather than reinstalling the OS, reconfiguring all of the software, and then copying over all of my data from my old laptop -- I decided to try to use dd to clone my drive. It worked pretty darn well (thanks Saikee!). However, I have two problems that I have noticed so far:
1) The system does not seem to offer me the option to install the proprietary nvidia driver. I was able to manually install the nvidia-glx-180 package and then edit xorg.conf appropriately and I'm running with the nvidia driver now. So this problem is resolved (though I still find it odd it didn't even offer my the "restricted hardware drivers" option in System -> Administration).
2) Wireless is not working. I checked dmesg and it doesn't seem to have any errors in it. Here is a list of things I have checked/found which I think might be relevant:
- Oddly enough it seems that my wired device always gets renamed from eth0 to eth1, and my wireless device gets renamed from wlan0 to wlan1. I'm not sure why (though I would prefer them to be eth0 and wlan0).
- dmesg output looks good shows some message about the wlan1 link not being ready
Code:
bmayes@bdmlin:~$ dmesg | grep wlan
[ 10.915831] udev: renamed network interface wlan0 to wlan1
[ 185.179556] bridge-wlan0: peer interface wlan0 not found, will wait for it to come up
[ 185.179559] bridge-wlan0: attached
[code]...
View 10 Replies
View Related
May 3, 2010
Using the video card Nvidia 7800GT on an AMD4200, MB T6100, I am unable to install from the iso, as progression is halted by a video mode that is unviewable. (black and white rows). I can get to the "f6" menu, however once I attempt an install it fails. My main goal is to install Mythbuntu, however the problem seems to be with the Unbuntu install drivers.This post worked to get around this on version 6.10, however these instructions no longer work. http://ubuntuforums.org/showthread.php?t=379807
Is there any way to use the newest Nvidia drivers that should work from a new install CD? I do not see a command line option, which would seem to allow me to install and update and setup the distro, THEN add my drivers before I run xconf.
View 6 Replies
View Related
Jan 3, 2011
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
View 4 Replies
View Related
