Ubuntu Installation :: Messed Up GRUB After Upgrading 10.10 To 11.04?
Mar 7, 2011
So, I had Win7 and Ubuntu 10.10 in dualboot and after upgrading to 11.04 I managed to screw up GRUB, it didnt boot into Win7 anymore. After that I got rid of both ubuntu and swap partitions and merged them to Win7 partition via Gparted and made a clean installation of 10.10 again next to existing Win7 hoping to fix GRUB and be able to boot into Win7, but now when I try to boot into Win7, I only see '_' blinking on top left and nothing happens, Ubuntu works fine.
View 9 Replies
ADVERTISEMENT
Apr 30, 2011
i upgraded my ubuntu to 11.04 and i didnt like unity. and installed gnome3 from ppa. then i couldnt login. tried to remove gnome3 and everything messed up here. when i tried apt-get install ubuntu-desktop, it gave unmet dependencies error. i tried bunch of stuff,none solved the problem. for now i installed xfce, and using it.
View 4 Replies
View Related
Oct 14, 2010
I have used openSUSE for a long time, but was trying to install Kubuntu 10.10 in addition to opensuse 11.3 and Windows 7 on a Gateway desktop (1500 GB hard disk & an external drive with 1000 GB. From the CD with the isoimage I got the live version and then decided to press install. I chose to follow the suggested choice of partition: About half of the external drive (500 GB) was allocated to Kubuntu while the internal hard drive contained Windows 7 and opensuse.
Everything went well until I was asked to restart the computer. I got a black screen with the message:
error: no such device: 64e3ffcl-c003-482a-87f3-89489e5e067d. grub rescue> At this point the only command that will not respond with Unknown command .. is 'ls' which gives: (hd0) (hd0,msdos9) ... (hd0,msdos1) (hd1) (hd1,msdos2) (hd1,msdos1) (fd0) (fd1)
I am now ***completely lost***. The only step that gets me out of this screen is ctrl-alt-del which causes a reboot and brings me back into the same situation. The ***computer is useless*** until this is resolved.
View 4 Replies
View Related
Jan 31, 2010
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
View 7 Replies
View Related
Jan 6, 2010
I have installed ubuntu 9.10 and everything was working fine. Just a minutes ago a window popped up telling me that a complete update couldn't be completed, and asked me to go on with a partial update. I did it and then a window popped up (I think it was debconf running) asking me if I wanted to delete phpmyadmin database configuration or if I wanted to keep it... seemed like the updater was removing quite a bunch of packages!
After that I was presented with a long list of packages to be removed (among them apache2, php5, linux headers, etc.) I thought it was going to remove them in order to reinstall them latter, so I let it go) but now there's no ubuntu entry in the grub menu, so I had to boot with windows! Right now I'm downloading ubuntu 9.10 livecd to give it a try...
View 5 Replies
View Related
Sep 11, 2010
I am currently running Ubuntu 9.10 on my desktop (no duel boots, its a single os on the computer) I wish to upgrade to 10.04 using the update manager, but the only thing that is stopping me is the new Grub.
Will the upgrade replace the current grub to the new one? because I DONT want it to change it, as previously I had issues with Grub 2 failing to install onto my hd. I just want it the same as it is now but with 10.04
View 1 Replies
View Related
Jul 6, 2010
I had Vista loaded on my computer, then loaded the BRILLIANT ubuntu onto a second partition! This gave me the GRUB boot loader which is fine.My 2 points are;1. Can I change the position of the items in the GRUB loader so if no keys are pressed it loads Windows automatically?? (Its for my sons computer!!) Also can I edit the GRUB so its less complicated for him??2.I want to update his Windows to Win 7, free upgrade! This over rights the Win partition and will therefore get rid of my GRUB loader. When I have updated how can I get back the ability to chose between booting Win 7 and Ubuntu?? How do I get the GRUB back?
View 3 Replies
View Related
Apr 10, 2010
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
View 2 Replies
View Related
Jun 7, 2010
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
View 9 Replies
View Related
Apr 30, 2010
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies
View Related
Jul 19, 2010
I did a system update and it did something to the grub loader and now all I can select is my windows partition. I'm not really sure how to go about restoring my grub loader. I had ubuntu 10.04.
View 5 Replies
View Related
Jan 20, 2011
I've tried the instructions here[URL].. But I couldn't get that to work.Anyone know what I can do?
View 9 Replies
View Related
Oct 30, 2010
i wanted to fix splash screen, to be in 1680x1050 resulution, so i've found this: [URL].... After restart i don't have Ubuntu, with Linux 2.6.35-22-generic, just Ubuntu, with Linux 2.6.35-22-generic (recovery mode) My grub.cfg
[code]....
View 9 Replies
View Related
Jul 14, 2011
I just started using Ubuntu 10.04 for development reasons and installed Ubuntu on a seperate harddrive with dualboot option with Windows 7.Today Win 7 got an update and I mysteriously got bumped back to the grub screen after selecting Windows boot option, but my Ubuntu was ok. After that I probably did the worst I could, and googled the problem and tried out some years-old advices which messed up my ubuntu boot as well.I am currently using my computer through Ubuntu Live Usb.
View 6 Replies
View Related
May 16, 2010
Today I tried to boot up Win 7 but it appeared "BOOTMGR is missing" error. I boot from windows dvd, selected repair but it didn't found my windows install. I have to use rebuildbcd - didn't work, then mark my partition as active - I figured out that it was active and I marked it as inactive and now grub is also broken and I'm using live cd.
View 8 Replies
View Related
Apr 6, 2010
Been trying to solve this using Google for a while. Well, I recently did: sudo apt-get dist-upgrade. Now, whenever I boot up I get "Error #15: File not found."From what I've gathered, something is wrong with my menu.lstI've tried several things to fix this, but I can't figure it out.
Code:
#
# examples
[code]....
View 9 Replies
View Related
Jun 4, 2011
I installed Fedora on a separate partition and during the install prompts forgot to uncheck the Grub installation. So, Fedora installed with Grub 1 (imagine that) although I was able to find instructions to upgrade it to Grub 2 (plus it recognized all the OS on the computer). So far so good, I don't have a preference whether Fedora's or Ubuntu's Grub is installed, however the Ubuntu Startup Splash screen is messed up, ie. a simple purple background with "Ubuntu" in system fonts. Is there a way to fix this back to the graceful default splash screen? Can I change back the Grub to be Ubuntu's?
View 4 Replies
View Related
Nov 27, 2009
I just did an upgrade from 11.1 to 11.2 and can not boot to OpenSUSE any more. That happened when the first reboot was starting after finishing the upgrade from the DVD. I tried to find the issue and use the repair system with no luck yet. Now I get no gfx for grub
The only thing I managed is to add the windows boot section for windows but I can not seem to boot to opensuse. device.map:
Code:
(hd1)/dev/disk/by-id/ata-ST3160815AS_5RA2LTD0
(hd2)/dev/disk/by-id/ata-ST3160815AS_5RA2LQCJ
(hd0)/dev/disk/by-id/ata-Maxtor_6L160P0_L31AHTVG
device.map.old
[Code]...
View 9 Replies
View Related
Mar 10, 2011
This seems to be a variant of a problem many people have had, but after several hours trawling through various forums, I haven't seen a reliable match for my situation.In brief:Adding a third boot partition (of Ubuntu) to my existing dual boot of OSX 10.6 and Windows 7 seems to have crippled the Windows boot from working, because Grub apparently takes over the process. Yet Grub does *not* appear to be on the Windows partition.
More verbose:I have an older MacBook Pro (3.1, running Snow Leopard) that I recently refitted with a new 240GB SSD HD. With the extra space (it was previously only 120GB) I decided to add a dual boot with Windows 7 using bootcamp. This all went swimmingly well.Encouraged, I decided to follow this Lifehacker article's suggestion and triple-boot the machine with Ubuntu (I'd never used Linux before):So I now have the nice rEFIt boot partition selection screen, and, indeed, I'm up and running in Ubuntu, and enjoying it.
Only one problem: I can't get into Windows any more. If I try to go in through rEFIt *or* by holding down OPT at startup and selecting the windows partition directly, the result is the same: I get thrown into Grub's selector, and selecting the Windows partition from there leads to an error message and a dead end.Having read through numerous postings, I get the impression that Grub is doing something or living somewhere that it ought not to be, but in most cases I've seen, people had accidentally installed Grub onto the Windows partition (or indeed onto EVERY partition). So far as I can tell, this isn't the case with me. Here's my boot summary:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 9 Replies
View Related
Jun 15, 2010
I had windows 7 and I just wanted to try ubuntu and I am totally new to linux, however, I installed ubuntu 9.10 using wubi and it was fine when I boot it asks me for windows or ubuntu no problems. Then it asked me to upgrade to 10.04 I agreed and installed it. After installition restrting it gave me this grub thing I don't know what to do I googled it but I couldn't fix the problem please help I need my computer soon.
Also I tried but I couldn't boot from windows or ubuntu cd.
this may help: if I printed "ls" it gives me "(hd0)"
View 9 Replies
View Related
Sep 29, 2010
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
View 4 Replies
View Related
May 10, 2011
I'm currently on a work trip with my Asus G72GX laptop for non-work use (I'm posting from my work laptop). Yesterday, I accidentally booted into my laptop's recovery partition (from the Grub2 bootloader). Before I realized that that's what was happening, it booted into some kind of recovery program which ended up in an error. I restarted the laptop and couldn't get into the bootloader anymore. Now, the only thing that comes up is an error -- "error: unknown filesystem." Below that, it gives me the "grub rescue>" prompt. Most of the commands that sites list for grub rescue only return "Unknown command". ls works and lists all of my partitions: (hd0), (hd0,msdos, (hd0,msdos7), etc. down to msdos1. When I "ls (hd0,msdos" (etc, etc) it says "error: unknown filesystem."
I then started looking into booting from a Live Ubuntu USB drive. I've tried 11.04 and 10.04 now and they both do the same thing. I put them on an 8GB flash drive (only 1 at any given time) using Universal USB Installer and was able to get to the Ubuntu menu (Run Ubuntu from this USB, Install Ubuntu on a Hard Disk, etc.) If I try either "Run Ubuntu" or "Install Ubuntu", the screen flickers and comes right back to that menu.BTW, my 3 operating systems are: Windows 7 HP 64-bit, Mythbuntu 10.10 64-bit, and Windows XP 32-bit. Laptop hardware: Core 2 Duo P8700 2.53GHz, 6GB RAM, Nvidia 8800 GTX video card.
View 4 Replies
View Related
Jun 27, 2011
I upgraded the boot loader using apt-get upgrade. So Grub upgraded and I believe it automatically ran the upgrade-grub-from-legacy executable. I was confused on what to do so I selected all drives. When I did that, I received a bunch of messages, I will write only non-redundant ones:
mdadm group disk not found (many times, over 20 or so) installation finished, no errors reported (4 times, I guess for my 4 hard drives)Found linux image vmlinux Found initrd image Next, I reboot, and absolutely nothing, not even a grub prompt!! So I tried the following:
1) grub-install /dev/sda1
2) Super grub disk
3) Ubuntu Server Installation CD in rescue mode trying, I get the infamous red error screen when trying to install grub
Nothing worked! My partitions are all there and I can see them and mount them from rescue CD, but I cannot boot to the system, My partitions layout:
One LVM sitting on two RAID-1 Drives Sitting on all four hard drives sda, sdb, sdc, sdd
One Root partition /dev/md2 in RAID-1 Drive sitting on two of the four drives (sda2 and sdb2) Four bios_grub partitions sda1, sdb1, sdc1 and sdd1 each ~1MB Two Swap partitions on two raid drives
I would give more detail but I think the problem is probably in the bootloader configuration because I can access all partitions including LVM and RAIDs from the rescue CD.
View 2 Replies
View Related
May 24, 2010
I had just finished upgrading my system to 10.04 and it restarted my pc and now i can't boot my pc anymore All i have is this at the beginning
[Code]....
View 2 Replies
View Related
Oct 8, 2010
First off I'm loving my ubuntu experience on my other devices. My netbook and other laptops run wonderfully. I'm trying to get my HP dv6700 up and running but I'm having trouble right out of the gate. When I boot up on the CD the screen becomes "messed up". I can actually still see what is there, I just see basically three copies of everything, almost like it is out of sync. I assume this is a graphics card driver issue but how can I resolve this when it does it upon the installation screen? I'm trying to install Ubuntu 10.04.1.
View 4 Replies
View Related
Nov 26, 2010
I just did a new upgrade to Maverik, however I accidentally messed up my second hard drive in the process. I have read up on data recovery stuff and there are tons of tool... but I need to know what happened, then I can worry about the fixing. Ok, Standard P4 PC with two HDDs.
1 X 120GB for / & /Home
1 X 350GB for /Data
During the install I told the setup my second HDD is /Home (who knows why?? -stupid I know) and that its EXT4. (no format) Now I have a lovely clean HDD with /home. What happened here now??... There were no partition changes made, I did not format the drive.
View 9 Replies
View Related
Dec 3, 2010
The last update of a few days ago messed up the update manager. here is the error that I get. I do not have the time to hunt for bug reports to report this and don't know how anyway. maybe someone else can do it.
Could not initialize the package information An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_maverick_main_b inary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
View 2 Replies
View Related
Jul 2, 2010
I have updated from 9.10 to 10.04 on line via Update Manager. Update Manager messed up my sources. Blocked most of them on update. I unblicked them and changed everything to Lucid from Karmic. No luck. Errors all the time:
Code:
W: GPG error: [URL] lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
I cannot add gpg keys and use for example canonical.
View 2 Replies
View Related
Oct 13, 2009
I just installed grub2 on my laptop and everything works fine and boots right. It gave my the option to run
'sudo rm -f /boot/grub/menu.lst*' after the installation because it said it could not determine itself if these files were necessary to keep.
I'm not sure what files they are exactly, or how to find them either, but do people usually delete them after upgrading?
View 2 Replies
View Related
Jan 14, 2010
I have this weird problem. The other day I asked a question about restore the backup file after dual boot installation. I have done the dual boot ( XP installed first) then restored the backup file. Now the problem is that I forgot if I excluded system files from backup or not, so when I restored and rebooted, my installations got messed up, many programs do not find their path to run, etc. But the real problem is when I rebooted again, I got error 15: file not found tried to follow some other posts here to solve this and noticed that running fdisk -l gives me:
[Code]....
View 1 Replies
View Related
