Ubuntu Installation :: Grub Entry Gone After Upgrading 9.10
Jan 6, 2010
I have installed ubuntu 9.10 and everything was working fine. Just a minutes ago a window popped up telling me that a complete update couldn't be completed, and asked me to go on with a partial update. I did it and then a window popped up (I think it was debconf running) asking me if I wanted to delete phpmyadmin database configuration or if I wanted to keep it... seemed like the updater was removing quite a bunch of packages!
After that I was presented with a long list of packages to be removed (among them apache2, php5, linux headers, etc.) I thought it was going to remove them in order to reinstall them latter, so I let it go) but now there's no ubuntu entry in the grub menu, so I had to boot with windows! Right now I'm downloading ubuntu 9.10 livecd to give it a try...
View 5 Replies
ADVERTISEMENT
Jan 14, 2010
My problem is this, I decided to try Pardus since I had the disk space available and learned that it never created a entry for Ubuntu 9.10 64-Bit. I have tried many different boot options and have only gotten it to show the first black and white bootsplash but never can continue to boot. Is there a option I am forgetting to add via Pardus's GRUB editor or is it something else?
View 3 Replies
View Related
Sep 12, 2009
I want to avoid kernel id in Grub entry. I have searched before and one poster (can't find it again) posted a very simple Fedora Grub entry that just pointed to Fedoara's menu.lst. which worked.
For Suse I use:
title openSUSE 11.1 (on /dev/sda7) by symlinks
root (hd0,6)
kernel /boot/vmlinuz root=/dev/sda7 splash=silent showopts vga=0x31a
initrd /boot/initrd
savedefault
boot
I nave tried:
title Fedora
root (hd0,4)
rootnoverify (hd0,4)
chainloader +1
Where Fedora is on sda5 but, doesn't work for some reason.
View 6 Replies
View Related
Jan 2, 2010
i have puppy 4.2.1 installed on my hdd and have frugal installed a older version inside the existing puppy and would like to add it to the existing GRUB menu
View 6 Replies
View Related
Jan 26, 2010
I currently dual boot and wish to know how to remove the Windows partition/drive while still allowing Ubuntu 9.04 to load safely as my main OS. I know how to restore windows partition by;
If MBR gets damaged boot from MS Windows Xp disc, Select "R" for "recovery console", select main windows installation drive (admin password usually nothing, just press enter) and type "FIXMBR" this will allow you to boot windows again, but Ubuntu partition will be unbootable and require installing ubuntu again to dual boot.
But this leaves Ubuntu partition Un-bootable as it removes the grub menu, how would I do the same for Ubuntu and make window partition un-bootable so I can remove it?
View 5 Replies
View Related
Jul 9, 2010
Ubuntu's update manager recently updated the Grub menu.lst file. It let me decide if I wanted to keep my old menu.lst or the new one. After deciding that I was fine with the new one, I found out that I can no longer boot into Windows 7. I had previously edited menu.lst so that Windows would be at the top of the list, however, I didn't notice that this had put it into the automagic update area, and I realize now that I should have just edited what the default number was instead of moving around the entries.
Anyways, I can no longer access my Windows 7 OS via Grub, and I was wondering what sort of fix I can have for this. I've tried running update-grub, but it hasn't fixed the problem. The Windows bootloader is on the first partition of the only hard drive, as far as I can remember.
View 9 Replies
View Related
Apr 12, 2011
I have just installed Debian and the installation went smooth (net installation). The last prompt was to specify if you want to be able to boot 3 different OS's using grub. I answered yes (I have Win7, Ubuntu and now wanted to install Debian for testing purposes). Is there any way I could manually add entry to grub for booting Debian, for instance from Ubuntu adding to menu.lst?
View 2 Replies
View Related
Jun 10, 2009
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
View 7 Replies
View Related
Sep 11, 2010
I am currently running Ubuntu 9.10 on my desktop (no duel boots, its a single os on the computer) I wish to upgrade to 10.04 using the update manager, but the only thing that is stopping me is the new Grub.
Will the upgrade replace the current grub to the new one? because I DONT want it to change it, as previously I had issues with Grub 2 failing to install onto my hd. I just want it the same as it is now but with 10.04
View 1 Replies
View Related
Mar 7, 2011
So, I had Win7 and Ubuntu 10.10 in dualboot and after upgrading to 11.04 I managed to screw up GRUB, it didnt boot into Win7 anymore. After that I got rid of both ubuntu and swap partitions and merged them to Win7 partition via Gparted and made a clean installation of 10.10 again next to existing Win7 hoping to fix GRUB and be able to boot into Win7, but now when I try to boot into Win7, I only see '_' blinking on top left and nothing happens, Ubuntu works fine.
View 9 Replies
View Related
Jul 6, 2010
I had Vista loaded on my computer, then loaded the BRILLIANT ubuntu onto a second partition! This gave me the GRUB boot loader which is fine.My 2 points are;1. Can I change the position of the items in the GRUB loader so if no keys are pressed it loads Windows automatically?? (Its for my sons computer!!) Also can I edit the GRUB so its less complicated for him??2.I want to update his Windows to Win 7, free upgrade! This over rights the Win partition and will therefore get rid of my GRUB loader. When I have updated how can I get back the ability to chose between booting Win 7 and Ubuntu?? How do I get the GRUB back?
View 3 Replies
View Related
Apr 10, 2010
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
View 2 Replies
View Related
Jun 7, 2010
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
View 9 Replies
View Related
Oct 7, 2010
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
View 6 Replies
View Related
Apr 30, 2010
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies
View Related
Mar 19, 2010
I just installed archlinux to try it out and need to add the entry to Grub.
I formated the hard drive with the a root partition for arch of 42Gb and ubuntu can see it perfeclty.
When I was installing arch I made a mistake and installed grub again, overwriting my previous grub with my ubuntu and windows entries.
So I fixed and got my working grub back with SuperGrubDisk, but now I want to add the ARCHLINUX entry to Grub and dont know how. I have added the previous entries from the grub that ARCH installed and moved the initrd and vmlinuz files to the /boot directory on ubuntu, but it doesnt work. I did a similar thing with Acronis True Image rescue cds(to avoid having to insert the cd in order to use it) and it worked like a charm, but I am lost in this one.
Here are my partitions, sdb is the one where all my partitions and files are (sdb5 is where ARCH is), the other 2 are backups:
Quote:
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xda85214c
[Code]....
View 4 Replies
View Related
Oct 26, 2010
I have a pc where there was redhat installed, and I decided to put ubuntu in dual boot.The installation went ok, but now I can't log in with redhat anymore. RH was installed on a RAID partition, and I installed ubuntu on an additional HD.
Now I have two problems:
a) I cannot boot red hat, since there is no such entry in the grub
b) this machine had several users, that now cannot access it remotely anymore.
Below you can find the output of fdisk -l and the grub.cfg files, the old red hat one, and the new one created by ubuntu. Not that in any case I cannot reinstall redhat, since there are other people using the machine.
[Code]...
View 2 Replies
View Related
Nov 15, 2010
I was cleaning old kernels from Grub menu, all sorted except for a vista entry that i could not delete. Ran this line which I found,"sudo chmod -x /etc/grub.d/30_os-prober", to remove unwanted entries, now only the linux entry left in Grub menu, windows 7 entry gone. The vista entry was from an old install which is not there anymore. Running 10.10 at the moment which is dualbooted with win7.
View 7 Replies
View Related
Dec 23, 2010
i just know about this : Boot Info Script 0.55 dated February 15th, 2010
[Code]...
View 9 Replies
View Related
Dec 20, 2010
I need to remove an entry from my grub boot loader does anyone have a simple way to do this?
View 6 Replies
View Related
Nov 10, 2010
Trying to change with the entry of grub:
sudo kate /boot/grub/grub.cfg putting "Windows 7" in place of Windows Recovery Environment (loader) on /dev/sda2.
Just launch the command sudo update-grub charge me more:
-Found linux image: /boot/vmlinuz-2.6.35-22-generic
-Found initrd image: /boot/initrd.img-2.6.35-22-generic
-Found memtest86+ image: /boot/memtest86+.bin -Found Windows Recovery Environment (loader) on /dev/sda2
Windows 7 should be written here. The procedure is another?
View 9 Replies
View Related
Aug 17, 2010
Is it possible to remove the entry 'Other operating systems' from the Grub menu display? I mean that it can be commented in menu.lst,but will it affect other OS(Win XP in my case) in any way?
View 2 Replies
View Related
Jan 13, 2011
I have added a manual entry to /etc/grub.d/40_custom and ran update-grub and the entry is added to /boot/grub/grub.cfg OK. But when booting the entry is not appearing. I am a bit stumped trouble shooting this as there are no errors.
View 9 Replies
View Related
Jan 18, 2011
I installed centos 5 in my PC. When it come to boot loader section I choose another partition (boot) not master boot record. After installing successfully when I restart my PC it is not showing grub it is going stright away to windows. I have also installed window xp. How to add grub entry in mbr.
View 3 Replies
View Related
Jun 15, 2010
I had windows 7 and I just wanted to try ubuntu and I am totally new to linux, however, I installed ubuntu 9.10 using wubi and it was fine when I boot it asks me for windows or ubuntu no problems. Then it asked me to upgrade to 10.04 I agreed and installed it. After installition restrting it gave me this grub thing I don't know what to do I googled it but I couldn't fix the problem please help I need my computer soon.
Also I tried but I couldn't boot from windows or ubuntu cd.
this may help: if I printed "ls" it gives me "(hd0)"
View 9 Replies
View Related
May 31, 2011
I followed the instructions from this post to reorder my boot options. But somehow I was stupid enough not to copy the windows entry, as indicated (I was mainly following only terminal instructions and such).Now I have a grub menu without my Windows 7 entry, please tell me there is a way to restore it.
View 9 Replies
View Related
Jul 20, 2011
I have Recently downloaded Fedora 15.|64bit| & I Think its a very good distro. However I Realised Once My Pc Restarted My Windows 7 Was Removed from my boot entry. I am Not At All familar with Linux, Ive Read millions of forums trying to fix my problem but all has failed.Could someone show me how to add The OS Back or How To Burn A Bootable OS (Win7) Using This Distro Of Linux.
View 10 Replies
View Related
Jun 15, 2010
For some time I have been using Clonezilla to backup/restore linux installations. I would like - instead to USB-key that is always not to be found, to somehow "move" the clonezilla (on a USB stick). What I have tried to is to make a separate partition to install this on, copied all the files on the USB -key to that partition, and then make a new entry in GRUB via yast. Then I point to the new wmlinus and initramfs. I would have been much surprised if something link this was working after first shot. But it was also not working after the 80. shot.
View 3 Replies
View Related
Jun 15, 2011
I'm going to try and install fglrx again, however last time it killed my system, giving me a 'display not detected' error on my monitor with no way to reach a non-grapgical tty to edit xorg.conf.Is it possible to create a custom grub entry that will boot Fedora 15 with the Radeon drivers in case fglrx once again trashes my system?
View 2 Replies
View Related
Jun 17, 2011
I have looked at the GNU GRUB Manual 1.99 at [URL] but I cannot find an explanation of what the kernel entry / command in the grub.conf file means. I get what's the meaning of that entry but where is described what it actually is and what are proper.
I suppose this entry / command was actual in GRUB Legacy, but I cannot find where it is described...
View 1 Replies
View Related
