Ubuntu Installation :: Marverik - Messed Up Drive
Nov 26, 2010
I just did a new upgrade to Maverik, however I accidentally messed up my second hard drive in the process. I have read up on data recovery stuff and there are tons of tool... but I need to know what happened, then I can worry about the fixing. Ok, Standard P4 PC with two HDDs.
1 X 120GB for / & /Home
1 X 350GB for /Data
During the install I told the setup my second HDD is /Home (who knows why?? -stupid I know) and that its EXT4. (no format) Now I have a lovely clean HDD with /home. What happened here now??... There were no partition changes made, I did not format the drive.
View 9 Replies
ADVERTISEMENT
Dec 26, 2010
I installed Ubuntu 10.10 onto my laptop and got a new plug and play device that wasnt being read so I went to go and install windows onto my laptop and when I get to the screen to select my partition it says its unreadable or its not detected but when I restart it it works fine in loading ubuntu.
View 2 Replies
View Related
Jul 28, 2011
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies
View Related
Mar 12, 2010
Last night I was making a boot usb drive with usb startup creator onto a USB external well I, messed up and lost the partition table for 2 USB drives: my 500 gb hard drive was pluged in whilst i was doing this silly i know it was partitioned 251 gb its now showing as 500 gb but the data is still on drive it seems the file system is gone or damaged
View 2 Replies
View Related
Jul 21, 2011
I wrote a part of a bootable image to the hard drive with the dd command and now i can't finish installing a linux without getting a grub fatal error.how can i restore my hard drive?
View 6 Replies
View Related
Jan 31, 2010
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
View 7 Replies
View Related
Oct 8, 2010
First off I'm loving my ubuntu experience on my other devices. My netbook and other laptops run wonderfully. I'm trying to get my HP dv6700 up and running but I'm having trouble right out of the gate. When I boot up on the CD the screen becomes "messed up". I can actually still see what is there, I just see basically three copies of everything, almost like it is out of sync. I assume this is a graphics card driver issue but how can I resolve this when it does it upon the installation screen? I'm trying to install Ubuntu 10.04.1.
View 4 Replies
View Related
Dec 3, 2010
The last update of a few days ago messed up the update manager. here is the error that I get. I do not have the time to hunt for bug reports to report this and don't know how anyway. maybe someone else can do it.
Could not initialize the package information An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_maverick_main_b inary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
View 2 Replies
View Related
Mar 7, 2011
So, I had Win7 and Ubuntu 10.10 in dualboot and after upgrading to 11.04 I managed to screw up GRUB, it didnt boot into Win7 anymore. After that I got rid of both ubuntu and swap partitions and merged them to Win7 partition via Gparted and made a clean installation of 10.10 again next to existing Win7 hoping to fix GRUB and be able to boot into Win7, but now when I try to boot into Win7, I only see '_' blinking on top left and nothing happens, Ubuntu works fine.
View 9 Replies
View Related
Apr 30, 2011
i upgraded my ubuntu to 11.04 and i didnt like unity. and installed gnome3 from ppa. then i couldnt login. tried to remove gnome3 and everything messed up here. when i tried apt-get install ubuntu-desktop, it gave unmet dependencies error. i tried bunch of stuff,none solved the problem. for now i installed xfce, and using it.
View 4 Replies
View Related
Jul 2, 2010
I have updated from 9.10 to 10.04 on line via Update Manager. Update Manager messed up my sources. Blocked most of them on update. I unblicked them and changed everything to Lucid from Karmic. No luck. Errors all the time:
Code:
W: GPG error: [URL] lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
I cannot add gpg keys and use for example canonical.
View 2 Replies
View Related
Jan 14, 2010
I have this weird problem. The other day I asked a question about restore the backup file after dual boot installation. I have done the dual boot ( XP installed first) then restored the backup file. Now the problem is that I forgot if I excluded system files from backup or not, so when I restored and rebooted, my installations got messed up, many programs do not find their path to run, etc. But the real problem is when I rebooted again, I got error 15: file not found tried to follow some other posts here to solve this and noticed that running fdisk -l gives me:
[Code]....
View 1 Replies
View Related
Oct 7, 2010
I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies
View Related
Nov 5, 2010
I installed Virtualbox back in 10.04 and now have upgraded to 10.10. I used vbox repo for that:
[Code]....
View 1 Replies
View Related
Oct 1, 2009
I'm running F11 with an ATI HD3850 graphics card. I donloaded latest version of the ATI driver and installed it (without paying to much attention to versions and pre-reqs). This caused my display to be unusable in Gnome, nothing can be made out of it.
Was hoping to be able to repair this if I atleast had a bash prompt, but when I press ctrl-alt-F6 (or any F-button) my computer restarts. how I could fix this without reinstalling?
View 3 Replies
View Related
Nov 18, 2009
Fedora 12 seems to have made all my ntfs disks and partitions into LVM Linux (whatever that is) In all the time i've used other distros I've never seen this before .... I m getting them back to original state and accessable again, but have no idea what to do.....
[Code]....
I need help with:
1. get them back to original partition system
2. get them mountable
A question though, the information/files i had on these drives/partitions is it lost ? or is it still there?
View 7 Replies
View Related
Oct 14, 2010
I have used openSUSE for a long time, but was trying to install Kubuntu 10.10 in addition to opensuse 11.3 and Windows 7 on a Gateway desktop (1500 GB hard disk & an external drive with 1000 GB. From the CD with the isoimage I got the live version and then decided to press install. I chose to follow the suggested choice of partition: About half of the external drive (500 GB) was allocated to Kubuntu while the internal hard drive contained Windows 7 and opensuse.
Everything went well until I was asked to restart the computer. I got a black screen with the message:
error: no such device: 64e3ffcl-c003-482a-87f3-89489e5e067d. grub rescue> At this point the only command that will not respond with Unknown command .. is 'ls' which gives: (hd0) (hd0,msdos9) ... (hd0,msdos1) (hd1) (hd1,msdos2) (hd1,msdos1) (fd0) (fd1)
I am now ***completely lost***. The only step that gets me out of this screen is ctrl-alt-del which causes a reboot and brings me back into the same situation. The ***computer is useless*** until this is resolved.
View 4 Replies
View Related
May 1, 2010
I upgraded to Lynx.When I plug in a USB drive, the drive icon no longer appears on my desktop.If I go to Places/Computer it shows up.And once I open it, the icon appears on the desktop.
View 1 Replies
View Related
Feb 5, 2011
So I install Ubuntu 10.10 on a multi-drive, dual boot with windows 7 computer. At almost the end of the install, I see "running grub-install sda" or whatever it is. sda is my windows drive.So rather than asking where to install the bootloader or give you the option like it used to, it just did it to my "first" drive.
What the hell? Now my Windows MBR is gone. I like to maintain that so if my linux drive dies I can still boot into windows via the old windows boot loader.Possible to move Grub2 to my other drive and repair windows 7 drive MBR?
View 3 Replies
View Related
Jan 23, 2010
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies
View Related
Apr 7, 2010
I recently scapped XP Pro on an old laptop (Toshiba Portege 7220)as it was so slow and I installed Ubuntu 9.10 - All installed ok and it worked fine for about a month. Last week I switched on, got the Ubuntu splash screen and thats where it stayed. I gave lappy to a friend of mine that knows about Pc's (hahaha). When I got it back he said he'd wiped the HDD and partially installed xp. The install apparantly hung after the reformat and copying files onto it.My problem now is I can't boot from HDD, Ubuntu Live CD or Windows CD - Laptop is set to boot from cd then hdd.When I try to boot from CD, the cd is read as I hear the drive being used also see light for cd flashing, after a while i get a blank screen with flashing cursor in top left corner and the cd stops.If I remove the HDD and put it in external usb caddy I can see the windows folders/files when plugged into my desk top.My questions are :-
1. Is there any way to make the drive reusable as a internal drive again as I know it works as an external drive.I would like to reinstall Ubuntu on it
2. Is it a fault with the laptop itself - how do I check
View 5 Replies
View Related
Jun 11, 2011
Back in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
View 5 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Feb 27, 2010
I just installed a Caviar Black 1TB drive, did a new installation of Ubuntu 9.10. I do not have access to the internet on this computer, and was wondering if there is a way to get my old settings/files off the old drive onto the new?
Since it is a new install on the 1TB disk, I have no MP3 codec, so I can't play my music...this is bugging me, so I would at least like to get that capability back.
View 4 Replies
View Related
Apr 23, 2010
I have installed ubuntu in my D drive on my lenovo laptop but it not recognizing D drive only recognize C drive
View 1 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Jun 20, 2010
I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!
View 9 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Aug 26, 2009
I had F10 installed, then was tempted to download F11 (Leonidas). I was not happy with the OS, so I reinstalled F10.Now I cannot get my CD-RW Drive or DVD Rom Drive to operate fully. I can open documents saved in a CD but I cannot get any sound from music discs.They were working in the first F10. The icons are showing in "Computer" and appear ok in the Bios. I have tried disconnecting them both, rebooting, then reconnecting, without success. The details are:- Lite-on-CD-RW Drive & DVD Rom Drive unit- Pioneer.
View 9 Replies
View Related
Jul 30, 2010
I don't know what I have done this time, but on my desktop I have the cube effect, which is working fine. But now when I minimize a page it goes to the opposite end of the taskbar instead of to the workspaces I have.Using Ubuntu 10.04. Not sure if I have explained this properly. Also when I flip the cube to a clean desktop and open a new browser, it doesn't open on that side of cube , but reverts to original workspace and opens in a new tab there.
View 3 Replies
View Related
