So i have a computer running ubuntu, but i need to use this computer to install another OS to a hard drive connected via USB that will be installed on a laptop. How do i do this with an ISO file?
View 2 Replies
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have been playing around with Linux Fedora 14 for a while but would like to expand my skills. I am running Fedora 14 on a usb drive connected to my laptop via an e-sata connection. I have approx. 165 gig of space on the drive at present and I would like to dual-boot with Suse 11.3. I have set-up my bios to boot via my usb hard drive. If possible I would like to show my available o/s when I boot my fedora setup. I am probably not explaining this very well but basically I want to be able to run the 2 linux o/s from my usb drive.
View 1 Replies View RelatedI looked around on these forums and google and came to no solution so, I decided to make this thread. I'm using Windows XP and after I downloaded and tested out Ubuntu 9.10, I decided I'd like it as a second OS, can I install Ubuntu on my external hard drive (1TB)? would installing on an external hard drive take away the risks of losing data etc? If I installed Ubuntu on my external hard drive would it delete any files already on my hard drive?
View 9 Replies View RelatedI tried to do this and something went wrong, and caused so much trouble that I decided I didn't want to do it at all. Then I changed my mind today, and decided I'll try again even after all that happened.
View 4 Replies View RelatedAt present I have a hard drive with three primary partitions and one extended (logically split).
I'm runnining win 2k pro in each primary partition.
I'm about to reformat the middle primary partition and would like to take this opportunity of trying Ubuntu using the middle primary partition.
I'm using GAG to switch from one partition to another.
Is there any reason why trying Ubuntu in the middle partition would cause problems.
I think I read that Ubuntu can mess up the MBR.
I have Fedora 14 installed on my usb drive, works perfectly. What I would like to do is:- install Open Suse on the same drive, sharing the same swap, boot section but splitting or resizing the home partition, can this be done? I installed Fedora by booting up from a disc, plugging in my usb hard drive and then installing to that. Would I follow the same procedure for my 2nd installation, I think so but am open to correction. My laptop bios supports booting from disc and I have some 204 gig of free home space.
View 1 Replies View RelatedI have a HP Compaq 6710b notebook with W7 on it. I want to use Ubuntu for hobby activities, but as this is a company notebook, W7 should remain intact. I decided to install Ubuntu to an external drive.I set BIOS boot order to CD-USB-HDD.I attached a 2.5" 250GB WD Passport usb hard disk and installed Ubuntu to it from the CD.As a result, the clean install doesn't boot, I get a mere grub console (normal, not rescue).
Examining the situation I learned, that during Live CD session the inner hdd is hd0 and usb drive is hd1. Grub.cfg gets compiled to use /dev/sdb.When booting from usb drive, BIOS makes it to be hd0 and inner hdd becomes hd1 so grub tries to load kernel from W7 partition (and can't find it, I wonder why? )How to fix problem? Although grub.cfg is supposed not to be edited, may I change every sdb to sda in it?
I tried doing a search and couldn't find anything relatively recent on the topic so here is my question.
I am fairly new to the linux world and am in the process of trying out a couple different distributions. I am doing this by installing them to an external hard drive. This allows me to test them out without affecting my main system in any way. I have already tried openSUSE and it installed with no problems. I am trying to install Ubuntu, however when the installation tries to install GRUB2 it fails asking me for a different location to install it to.
When installing I unhook all drives from the computer except for the dvd drive, usb drive I'm installing from, and the external hard drive I am trying to install Ubuntu to. I'm not sure what else may be of use.
I installed Ubuntu 10.10 onto my laptop and got a new plug and play device that wasnt being read so I went to go and install windows onto my laptop and when I get to the screen to select my partition it says its unreadable or its not detected but when I restart it it works fine in loading ubuntu.
View 2 Replies View RelatedI have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies View RelatedTrying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedI just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
View 9 Replies View RelatedI have tried to install version 10.04 on a 1TB WD Caviar Green SATA drive. When I try to install from the install menu, the system cycles through the dots under the Ubuntu title for several minutes. I also get the same response when I try to check the disk. The system is an HP a1020n system.
View 1 Replies View RelatedI have pac on my hard. I need software to install on my hard drive, not on the Internet. How I set Ubuntu to do this?
View 2 Replies View RelatedIf i install a brand-new hd, do i have to do anything to it? I mean format or
dd if=/dev/zero of=/dev/sda count=1024 bs=1024
or can i just install the hd and go on to install debian?
I have been trying to figure out how to format my hard drive when I'm installing Fedora 11. When I boot from the live disk, all installation were done automatically, so I didn't see how I can do it. I tried googling it, but didn't find anything on how to do it either.
View 3 Replies View RelatedAfter installation, when starting to boot, I have several choices showing:
1)Ubuntu, w/ Linux 2.6.38-8-generic pae
2)Ubuntu, w/ Linux 2.6.38-8-generic pae (Recovery Mode)
3)Memory test (memtest 86+)
4)Memory test (memtest 86+, serial console 115200
5)Windows Server 2003 For Small Business Server (on /dev/sdd1)
I used #1 and I only have a blank screen.
I used #2 and I went into recovery mode, but I keep getting the error message: "No root
file system is defined. Please correct this from the partition.
I just want to erase all of numbers 1 to 5 and start clean. what should I do?
I bought a MENQ easy PC e790 with 2GB flsdh memory and 128 M RAM but no hard drive. It comes with Windows CE 5.0 The specs are as follows:
CPU: Samsung 400MHz/533MHz processor
RAM: 128MB
ROM: 2GB
OS: Microsoft Windows CE 5.0
Pixel resolution: 800 x 480 pixels
code....
How can linux be installed in CEs place and what distro would be best?
I tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.
View 2 Replies View RelatedI partitioned my hard drive on my computer with G-parted, the second partition (sda3) has data stored on it. I use to have Karmic Koala on sda1, but something went wrong and I want to install it back on sda1. How would I do this without losing my data on sda3? When I use the live disc, it want to install it onto sda3. I cannot figure out how to install it only on sda1.
Also, when I stored data, I want to store it on the sda3 partition. I already have on that partition a /jason file which was my old Karmic Koala.
I have added a 1.0 Tb USB HDD and would like to install games, extra software, etc. on it when using apt-get or Synaptic but I can not find any info on doing so.
View 5 Replies View RelatedI got a laptop from a friend. For some reason, it loaded the grub off of an SD card (He was running Xubuntu), so I tried re-installing Ubuntu itself on the hard-drive, completely ignoring the SD card. It wont work. The guy who sold the laptop to me took a look at it, and he's alright with Linux, but he can't figure out what's wrong with it. I tried adding my own partition tables, and they look something like this:
sda1 / 20G
sda2 /home 130G
sda3 SWAP 10G
I know it's more swap than I should have, but I plan on upgrading the RAM.Anyways, we're both completely lost. I think we want it to load a grub menu at this point because one isn't loading.
I have a SATA hard drive from a crashed system that was running Ubuntu 8.04. I want to install it in a Ubuntu 8.10 system and use it for file storage. How do I install and reformat it?
View 3 Replies View RelatedI've got Vista installed on my notebook and I've bought an external drive (1,5 TB, but its size shouldn't matter in this case) and after formatting it I left 10 gigs for future purpose. Now, I decided to install 64bit debian on the unallocated 10 gigs. And so I did. To be precise: I have SATA drive inside my lap and hard drive (it's also SATA inside the cover) connected to my lap through USB. Boot sequence was 1)CD/DVD 2)hard drive 3)removable drive. During the installation the installer detected my internal drive as /dev/sda and my external drive as /dev/sdb. I decided to install grub on /dev/sdb (it was logical to me, since I didn't want to mess up my regular drive's MBR). Installer created 5 partitions on my USB drive. After booting from my external drive (look below*) I've got a message saying
Code:
error: no such partition Entering rescue mode... and after that I was in grub rescue console. When I typed ls I've got an output
Code:
(hd0) (hd0,msdos1) (hd1) (hd1,msdos5) (hd1,msdos2) (hd1,msdos1)
When I tried to type
Code:
ls (hd0)/
I only got a message
Code:
error: unknown filesystem This occured for all the listed devices... On my internal drive there were (during the installation and running the live cd) 3 partitions detected (vista os, data, rescue disk) so I don't understand the output that ls in rescue console gave me. about booting from external drive: I did that after pressing ESC - I've got a prompt to choose which device I want to boot from - this wasn't working properly; after changing the boot sequence the grub started but with the abovementioned error message...
If there's any info about exact names/types/devices of my installed partitions needed I will run live CD and check it. If any other info is required I will provide it (I tried to describe the problem in the most precise way ) What I was thinking about: maybe there is a problem with ordering of the devices - when I boot from DVD my removable disk is treated as the "second one" and after booting from the removable disk it becames the "first one" or something like that? If any of you have any good info on how mapping of the device names works it would be appreciated, since I couldn't find anything useful or I just don't know what to ask google about.
1) How to install Debian on a removable disk (I had no problems with installing Linux on pendrive but I did that from VirtualBox and it was some time ago) OR how to install GRUB on a removable disk? (unfortunately, I cannot install 64bit system through VirtualBox)
2) What's the logic behind naming devices under /dev? How come the devices in grub have their names mapped as hdx etc and I've read that hdx are the names for IDE/ATA drives and sdx is the proper name for a SATA or USB device
I have a 250 gig usb hard drive, my bios allows me to boot from it. What I would like to do is install the above 2 o/s so I can dual boot from either one.
View 1 Replies View RelatedLong time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedI have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
View 6 Replies View Relatedi have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View Related
