I installed this package on Fedora 15.
[URL]
I tried to start the application and then the system crashed and showed a message a problem has occured and it could not be repaired by Fedora itself. I had to re-login to fix the issue. When i try to re-login everytime this message appears... like an endless circle.
I have noticed that Kupfer will not show up in the system tray in Kubuntu 11.04. I also had this problem with Linux Mint 11 GNOME.Because of this,I cannot access the Kupfer preferences
View 2 Replies View RelatedBut I feel like I should warn everyone that upgrading (with PackageKit) a Kubuntu 9.10 (64-bit) to Kubuntu 10.04 LTS, completely breaks the system and makes most everything useless ... In my case it found errors in the upgrading process, and also the bug rapport tools didn't work My 9.10 was only a few weeks old and I have done nothing unusual with the system. (My computer is a Compaq 615 laptop). If there are solutions to repair the system, then I would like 2 know.
View 3 Replies View Relatedwhat is kupfer?
isit running like run ?
may i know the advantage of kupfer?
if there is advantages of using kupfer how to install it...
sry to many question..
I wanted to give kupfer a try, though I had to build it from source as it doesn't appear to be in the repos. The building seemingly went fine and installed, but I get these error(s) when I try to run the program:
Code:
$ kupfer
Kupfer: A free software (GPLv3+) launcher
Copyright � 2007--2010 Ulrik Sverdrup with others
http://kaizer.se/wiki/kupfer/
Error [kupfer.plugin.websearch] OpenSearchSource: [Errno 2] No such file or directory: '/home/snakepc/.mozilla/firefox/z6orlu2l.default/searchplugins'
[Code]...
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
I configured ( sendmail + Smarthost + pop-before-smtp settings + smtp auth settigns ), today i saw 18000 mail in mailq and somebody sending mail from my mailserver ,as i got reported by ISP for spaming. How someone broke the sendmail + pop-before-smtp settings. i usually access that system through webmin. Is webmin cause to hack password.
Or How someone break sendmail security without even choosing my own user / password spamper settings messages to smart hosts to yahoo / gmail with his own junk user name and password? I stopped sendmail for the time being. Any idea what i should look for and what i should go for its remediation?
I am not fully sure if this belongs more to the networking section or the software. O hope it is related to here enough.
My problem is as the topic says.
My port 80 seems to be already taken. lighttpd fails to start reporting that it cannot bind to port cause its already taken.
The error message itself:
Code:
"Starting web server: lighttpd2010-02-21 07:01:02: (network.c.345) can't bind to port: :: 80 Address already in use failed!"
I am not able to crack this by myself. Ihve tried investigating this by
Code:
lsof -i :80
netstat -ape | grep -v unix
First doesn't show anything second anything abt port 80.
Now hints I can think of. Maybe you have more experience and ideas what I can do and where should I look for the culprit.
I am using debian (unstable) and lighttpd. I even tried rebooting; it says that the port is taken already at the boot sequence (well it starts pretty much at end anyway but the system should be clean).
It seems that it started failing after a major distro update, so maybe there are some conflicts based on ipv6/v4 or something, though I have no idea what it could be. Well my hit for that is the part of error msg "bind to port: :: 80 ". This "::" looks like ipv6 naming convention. Maybe its lighttpd internal.
I tried searching for these two apps but I can't find a 1-click install anyplace? Is it possible to install these two apps w/o a 1 click?
View 1 Replies View RelatedSo I was trying to upgrade kupfer when it told me it couldn't, as python-keyring was a virtual package and could not be installed. I'm using Karmic, so the package python-keyring is not available, although it is in Lucid. How would I go about upgrading kupfer/installing python-keyring??
View 2 Replies View RelatedI'm using kupfer 2.06, which is a tremendous little piece of software. The hitch is that when I use the evolution plugin to compose a new message, I'm only provided one email address per contact. I'm wondering if there's a way to designate a default or primary email address for each contact or some other way to influence this behavior. Not sure if the key to the issue lies with kupfer, its evolution plugin, or evolution.
View 1 Replies View RelatedI just upgraded to the new 9.10. In 8.04 when I went into "Restricted Drivers" it showed something for my video card. Now there is nothing.
I'm trying to play a game (Counter-Strike) and it's just too laggy, probably because I don't have any drivers installed for the video card.
It's an ATI Radeon X-1950 Pro. What can I do?
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies View RelatedI am running OpenSUSE 11.4 on my laptop and I decided to try out the Gnome 3 shell. I really like the design and I like the way it functions so I would like to keep using it, but it seems as though every time I install a new application or package it breaks Gnome 3. This is really frustrating because when I then try to log in it just gives me that cryptic error message that im sure you all have heard about "Oh No! Something went wrong!" or something like that and then it tells me to log out.
I know a fair bit about linux in general, but im no expert by any stretch of the imagination (my experiences have been with Ubuntu, Xubuntu, Linux Mint, and some older distros) so im only used to the Apt-get package manager and I find zypper to not be very understandable. So I don't know if im breaking Gnome 3 every time I install something because of some dependencies not getting installed. My laptop is running a Intel cure 2 duo processor and an Intel mobile graphics chipset (which runs gnome 3 fine normally).
It seems that updating the Kernel breaks my installation. I've tried it twice, and both times it disabled my gui desktop. I'm posting this with links2 in my terminal. The terminal works perfectly.
This is really annoying, as I can't even use my computer. What do you think is the problem?
I currently have a Windows 7/Ubuntu/Mac OS triple boot. However, every time I boot into Ubuntu 10.10, then boot into Windows, it fails to boot until a chkdsk is run. I see no particular reason this should happen, is there a way to either patch this, or to prevent Ubuntu from accessing the NTFS partition? I think this is where the problem is focused.
View 2 Replies View RelatedWas messing around today and installed kde-standard over my Ubuntu 11.04 install and I played around for a bit but wanted to go back to Unity but I switched it back to Ubuntu at the login and all the menu's are gone, just get my desktop, can right click and was able to make a launcher so I could get online but nothing else.
View 3 Replies View RelatedInstalling the RPM Fusion repositories brakes Yum and PackageKit.
Both stop working until the offending repo files are deleted and I can't download anything from any repository because "yum.py" or something doesn't release the lock and become a zombie
I don't know how to fix this as I tried to edit the repo and put the "failovermethod=priority" in it and it didn't work. I tried to make a repo file from scratch and it didn't work either.
There are no messages on the "Yum log file" I got this:
Nov 19 17:34:44 Installed: rpmfusion-free-release-10-5.noarch
Nov 19 18:20:10 Erased: rpmfusion-free-release
Nov 19 18:23:35 Installed: rpmfusion-free-release-10-5.noarch
Nov 19 18:38:03 Erased: rpmfusion-free-release
So I'm here now trying to see if anybody else is experiencing this and to ask for directions as I don't know what to do.
ps: Could I copy the repositories and make a local repo? If yes where can I find information about doing that?
I have Lenovo T410 with NVIDIA NVS 3100m running nouveau driver/F13. When I updated to the latest kernel, the display goes blank when booting and remains blank. I can ssh to the machine, so - it appears to be an X/display issue. All else seems to be working normally, and I didn't spot anything of interest in the logs - but perhaps I don't know what to look for.
Also, it appears to be an issue in the kernel package rather than in the nouveau driver package. I can still boot the former kernel successfully - even with the new driver files.
The previous kernel version was the version of the kernel that is provided with the initial F13 install.
[URL]
Another weird one I think. I have two integrated LAN's on the MB. All was OK in Windows and figured I'd do some work in Fedora 13. When I got there I had no internet. I messed around trying to get it working and gave up; went into Ubuntu; same deal. I booted Windows and the same; no network. I tried the other integrated connection and it worked. No way could I get the other nic to work so I tried shutting right down; pulled the plug; waited a few seconds; plugged it back and booted up and it's working again. Now I'm leery about going into Fedora. Anyone else have this problem. I think it happened to me once bofore and I thought my nic had bit the dust and plugged into the other connection?
View 2 Replies View RelatedI just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
I did an update during a time when power was cycling due do a nasty snow storm, but I'm pretty sure the update was completed successfully before I lost power. What did happen though is that my BIOS setup was reset.
Now if my HP Laserjet 1020 is plugged into USB during boot all other USB devices freeze for a while. So I played with my BIOS setting for USB:
- Enabled V1.1 and V2.0
- Disabled System USB Shadowing
So now my bootup doesn't hang. But now when I actually go into Karmic I still can't print.
dmesg shows the following:
[ 205.940008] usb 1-10: new high speed USB device using ehci_hcd and address 9
[ 219.510026] hub 1-0:1.0: unable to enumerate USB device on port 10
[ 223.430008] usb 1-10: new high speed USB device using ehci_hcd and address 10
[ 223.600766] usb 1-10: configuration #1 chosen from 1 choice
[Code].....
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
I updated last night and after a reboot I can get the GDM login but as my desktop loads it suddenly stops and complains of an error and won't load. If I load legacy Gnome desktop with Compiz it loads but ALL the lettering and words on the interface are messed up. By this I mean the letters are upside down and the words are spelt backwards. The mouse menus also work in reverse as in the menus themselves are also upside down and the highlighting moves from bottom to top as I move down the menu. Amusing but not what I want from my computer. There is nothing in /var/log/messages or /var/log/Xorg.0.log that would indicate anything is wrong.
I sooo don't want to have to rebuild, again, because of instabilities in F15 updates.
I had a working lirc using my hauppage card. After upgrade to Lucid, it no longer works. I don't see errors, but it appears to me is is not detecting the Hauppage card:
Code:
mythuser@PVR1:~$ dmesg | grep lirc
[ 19.761015] lirc_dev: IR Remote Control driver registered, major 61
[ 19.928886] lirc_i2c: chip 0x0 found @ 0x18 (Leadtek IR)
[ 19.928890] lirc_dev: lirc_register_driver: sample_rate: 10
[61920.300286] [<e086d654>] lirc_unregister_driver+0x44/0x160 [lirc_dev]
[61920.300289] [<e089a02b>] ir_remove+0x1b/0x30 [lirc_i2c]
[61920.300318] [<e089abc2>] lirc_i2c_exit+0x12/0x14 [lirc_i2c]
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
early tl;dr: The fancy grub breaks on my wubi 10.04 install, can I force it to use the old grub?
When I rebuild grub.cfg (last time was yesterday for kernel update to .37), and shut down / reboot, grub breaks because it can't 'loadfont' and a few other errors which are related to the 'graphical' grub boot menu.
To fix this I have to boot into a live CD (also Ubuntu 10.04) and run the following:
Taken from [URL]
Code:
sudo fdisk -l
sudo mkdir /win
sudo mount /dev/sda1 /win
sudo mkdir /vdisk
sudo mount -o loop /win/ubuntu/disks/root.disk /vdisk
[Code]....
I know how to fix it but is there a way to skip having to do this on upgrades
(If I edit the grub.cfg before shutting down then this doesn't happen, obviously, but sometimes I forget and this is the result. I'd rather stop the problem at it's source than fight against the updater).
X is working, I get a desktop, all updates are current, just no Unity menus/window/widgets/whatever, blank desktop with single mapped network folder and no working keyboard shortcuts after initial login. I upgraded on Alpha 2 and it ate my desktop, never has given it back for 3 months. I assumed eventually the upgrades would fix it. Looked into ditching Unity and doing GDM, but thought I'd wait it out, ran dpkg-reconfigure unity and it did nothing, can't find any relevant errors in the logs, where should I be looking and/or what should I be doing? Running lots of servers on this box and have dual-boot, otherwise I'd probably torch it and start over.
View 1 Replies View RelatedI was browsing the available packages to install the weather indicator and noticed that a network indicator was available. apt-get said that it needed to install 'connman' and remove 'network-manager' and 'network-manager-gnome' in order to install the network indicator. I foolishly assumed it knew what it was doing so I went ahead and performed the installation/removal and restarted the computer.
Now I cannot connect to the internet. I only have an ethernet card for connection to the internet, no wireless or otherwise. The configuration I use is not DHCP, but a manual settings of address/subnet/gateway and name servers
When I try to set the network values through the network indicator some of them do not stay set. The gateway value appears to be set, but then after closing down the indicator window completely it comes up with the value 'Modified'. The DNS servers is the only other value that does not stay set, but it only changes to be blank. The connection never works.
So, I downloaded 'network-manager' and 'network-manager-gnome' on another computer, transferred the packages by USB, and reinstalled them (uninstalling connman and the network indicator). But the network connection remains broken. At least with 'network-manager-gnome' the values I set stay set, they just don't work anymore. I've tried editing /etc/network/interfaces to previously working values directly, but they do not seem to have any effect either. The connection no longer works.
I really do not care if I use the network indicator or not at this point, I simply want the network connection to work properly.
Edit: I realize I forgot to say that I'm using Ubuntu 11.04 (upgraded from 10.10). The network card is the "Integrated Broadcom 57780 Gigabit Ethernet controller".
My mythbuntu 10.10 system including its lirc managed remote control has been working fine.I've recently done some updates (see below) and now the remote doesn't work correctly (only some of its keys seem to work). I suspect that lirc is no longer managing the remote and now instead the remote is now being treated like a keyboard.How do I get lirc managing my remote control correctly again,Before the updates the kernel was:
Code:
$ uname -a
Linux pvr 2.6.35-28-generic-pae #50-Ubuntu SMP Fri Mar 18 20:43:15 UTC 2011 i686 GNU/Linux
[code].....