Ubuntu Installation :: Installer Does Not Detect HDD
Mar 21, 2011
Ubuntu installer does not detect my sata drive during installation.
Hardware:
Asus p4gv-mx
4gb ram
250gb wd sataII drive
ide cdrom
Bios options tried:
Disabling apci 2.0
disabling apci
setting IDE mode to
[Enhanced]
[compatibility] w/both sata only, pata& sata settings
Setting my pata cdrom to slave and plugging it into the slave position of the ide ribbon.
I've tried these combinations with the usb installer, and dvd installer.
I've tried loading the live cd/dvd & usb then running the installer with in.
I've tried the spacebar method, hitting f6 and apci=no, noapci
The live cd has no problems detecting and mounting my hdd, however the installer does not detect it.
View 3 Replies
ADVERTISEMENT
Dec 28, 2010
I have Mint 9 installed on a 120GB, WD SATA HDD. Now I want to install Ubuntu 10.10 on this HDD. Downloaded i386 desktop image and created a bootable USB stick with the image. System boots fine but installer do not detect My HDD. It only lists my USB drive. Even Gparted donot detect the drive. Typing sudo fdisk -l also lists only my USB Drive.
View 3 Replies
View Related
Aug 11, 2011
I'm trying to install Ubuntu 11.04 alongside Windows 7, but when I boot from the CD, Ubuntu refuses to detect the presence of Windows 7. I tried unplugging all my external hard drives to see if that made a difference, but Ubuntu still can't tell that I have Windows 7 on there.
View 4 Replies
View Related
Feb 21, 2010
I'm using the Ubuntu 9.10 alternate install CD in an external PATA USB CD drive to try to install Ubuntu on a ThinkPad X60. The installer boots but then very quickly gets to a stage where it complains that, "No Common CD-ROM drive was detected". It asks you to point out the drive or load or select drivers, but there aren't any drives or drivers to choose. I brought up another console, and looked in /dev, but there isn't anything there that resembles a CD drive.
I tried
$ modprobe ide-scsi
But it can't find the module.
I followed the instructions here, found the drivers on a working system, and put them on a thumbdrive. However, when I mount it:
$ mkdir /tmp/drive
$ mount /dev/sdc1 /tmp/drive
Mount fails due to an "invalid argument," with two different USB drives that work just fine on other systems. When even mount doesn't work, I feel like I've got both hands tied behind my back. How I can correctly implement the above command-line fixes? I'm not sure what I'm doing wrong. I've installed different Ubuntus probably a dozen times over the years, and haven't gotten stuck this badly since somewhere around version 4. Whether this problem is specifically related to the fact that my external USB CD drive has a PATA interface. If I go out and buy or borrow a SATA USB CD drive, is this problem likely to go away?
View 6 Replies
View Related
Oct 5, 2010
I have a Dell Poweredge 2970 2x3.0 GHz AMD 64bit dual core, Perc 5/i controller, and 2 brand new Fujitso SAS 15K 146GB drives.
Trying to install Ubuntu 10.04 Server 64 bit from USB. At the point of detecting disks, the installer only recognizes the USB. The installation was created using Pendriveinstaller ver1.8.0.1 per Ubuntu Server web site instructions. I have the drives configured as 2 separate raid 0 arrays using the bios raid configurator. The drives have been initialized. (Tried before with a single Raid 1 array, but had same issue and since have read Ubuntu support for hardware raid is not great, so was going to bypass hardware raid for now).
I've seen some chatter on here about opening a terminal at this point and removing dmraid but don't see an option for terminal only shell.
View 1 Replies
View Related
Apr 17, 2011
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
View 2 Replies
View Related
Jul 12, 2010
I have a dual CPU Xeon machine that I have been using various versions of fedora on for years.
The machine has the following disk layout:
I currently have Fedora 10 and grub installed on hda and I had to jump through hoops to install such as disabling the promise controller and reassigning drives because that blasted /dev/mapper kept grabbing the Maxtor ATA drives although I didn't want it to.
Anyway, in the BIOS I can boot from the secondary IDE controller so I want to install Fedora 13 on hdb. Problem is, the Fedora installer won't detect the drive.
Its partition table is as follows:
There is approximately 69GB of free space on this disk but the blasted python based installer wont show the disk as a possible installation location. If I exit to a bash shell I see that the device nodes do exist and I can manually mount and manipulate the disk but the installer is brain dead where the disk is concerned.
I will mention that sdc, sdi, and sdj are used with mdadm to create high performance striped volumes. Also, sdc shows up under /dev/mapper and I don't want to use /dev/mapper at all. I want simple /dev/sd? mount points...no stinking /dev/mapper, and no stinkin volume manager wrappers...
Why I cannot get the installer to use /dev/sdb?
Is there a disk signature on /dev/hd[bc] that is causing them to be grabbed by /dev/mapper, and if so, how would I remove that signature from the drive? /dev/mapper is vacant under Fedora 10.
View 2 Replies
View Related
Oct 12, 2010
I have a ssd cosair harddisk with both usb and sata connecters. If I connect it with sata anything is working fine, and I managed to install Fedora core 13.
But I also want to be able to use the harddisk when it is connected with usb and that causes problems.
When I boot the Fedora Core 13 dvd It can't detect my usb harddisk.
When booting in install mode it just don't detect the harddisk.
When booting the dvd in rescue mode it don't detect the harddisk, and it don't create any entries in /dev/ for the harddisk. It is like there is no disk at all.
I have tested this on 3 different computers, so it is not a problem with my specific motherboard. So either it is a problem between my harddisk and Fedora Core 13, or there is some problems with the usb drivers in the boot image used by the Fedora core 13 dvd.
The disk is working fine if I connect it via usb to an existing Windows install, so the usb connection is working.
I installed Fedora core 13 with the harddisk connected to sata and then re-connected the harddisk to usb. It then boot up, but complain about missing root filesystem. Most likely caused by missing usb driver in my kernel.
But anyway, what I really want is the ability to boot from both sata and usb, so I can take the harddisk with me and boot it on other computers with usb.
So is there a command which allows me to build an kernel image which can boot from usb or am I trying to do something which is not really supported?
I did update my fstab to use LABEL=myroot
There is 1 Windows partition(NTFS) and 1 linux partition on the disk. (No seperate /boot partition and no swap)
View 1 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Dec 19, 2010
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies
View Related
Feb 16, 2011
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
View 9 Replies
View Related
Jul 8, 2009
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
View 2 Replies
View Related
Nov 28, 2010
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?
View 1 Replies
View Related
Apr 20, 2011
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
View 3 Replies
View Related
Dec 1, 2014
I'm trying to install Debian Jessie beta2 on a UEFI laptop. The installation worked just fine before with setting in manual partitioning an EFI system partition and a root partition.But when I try to partition with root as an encrypted volume I get this error when I wanna write changes to disk:" the attempt to mount a file system with type vfat in scsi1 partition sda at /boot/efi failed"When I choose resume partitioning the installer then freezes at "detect file systems".
Because my harddrive needs specific alignment I've made beforehand in gdisk:EFI System Partition of 100mib at /dev/sda1/boot partition of 512mib at /dev/sda2/ (because I expect the installer to want a /boot too for an encrypted device)rest of harddrive reserved for root at /dev/sda3
View 3 Replies
View Related
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
View Related
Dec 19, 2009
Trying to install SUSE on a perfectly working PC that was running Windows. Blew away all the partitions and formated the drives.When trying to install SUSE, Installer will not detect my two hard disks. Tried with version 10.x, 11.1 and 11.2, without success.My Mobo is a XFX GeForce 8209, and my SATA drives are both Seagates (1x120GB, 1x320GB). I've tried different SATA mode selection (i.e. SATA, AHCI, and RAID) without any success either.I've tried to look for SATA controller drivers for my Mobo, to try to load on Installer startup, but failed there too.
View 1 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
Mar 15, 2010
The instaler doesnt find my partitions and the XP that is installed too! For some reasons i cannot delete the whole hdd... if i format the partition, where (i want to install ubuntu) with fat, the pc crashes during the installing process after the tastaturlayout question! if i try some other formats, the installer tells me, that there are no Operating Systems installed and the hdd is unpartitioned!
if i start ubuntu live from the cd, the system finds all partitions, but if i run cfdisk in a terminal, i get a fatal error (cannot open disk space)... My machine is a acer aspire 1694 WLMi (pretty old, but should be no problem), bios is up to date, Windows is XP home edition with SP3.
View 6 Replies
View Related
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
Oct 10, 2010
I installed maverick meerkat but for some reason there was no install to free space option so I installed onto 32gb of my 170gb windows vista installation. I NEED THAT INSTALLATION. Maverick Meerkat cannot detect my windows installation!
View 9 Replies
View Related
May 2, 2010
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
View 1 Replies
View Related
Jan 12, 2010
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
View 5 Replies
View Related
May 3, 2010
I have three physical drives:
Drive 0: Used for paging file in windows and general temp file storage
Drive 1: Media storage
Drive 2: Windows installation
When booting off the Ubuntu 10.04 disc and running the installer, it gets up to the partition step and doesn't find my Windows installation (for the automatic partitioning and such) and lists Drive 0 as the drive it will install to. I really want it to see my Windows install and create a partition on that same drive. Can anyone help me in getting the installer to see the Windows installation?
View 5 Replies
View Related
Feb 19, 2010
The Ubuntu installer hangs on step 3 0f 6, the stage in which you select the keyboard layout. The computer it is being installed on is a Toshiba Satellite.disk had previously worked to install on a macbook for dualbooting.
View 6 Replies
View Related
May 28, 2010
change as I salvaged an old old computer and got it back into working order. Windows 7 kills the computer and the media being served is sluggish and slow.
The computer spec are as follows:
Asus A8N32-SLI Deluxe Bios 1303
Asus Nvidia En210
[code]....
View 8 Replies
View Related
May 28, 2010
I would like to get Linux working on my new Compaq CQ10-130ca. I was on ubuntu a few days ago, and the was a fast and easy way to create exactly that. Now I come back, the site has changed, and the USB key method too! I have tried to follow the instructions, but failed completely.,. Does anyone have an "easy" way to do this, or at least clearer explanations on how to proceed ?
View 8 Replies
View Related
Jul 11, 2010
i cant install 10.04 on my desktop with the 32bit or 64bit versions of 10.04 desktop.
i get to step 4 and there is nothing listed for partitions or any information and if i click forward, i get that message "no root file system is defined" "please correct this from the partition menu"
View 1 Replies
View Related
Aug 16, 2010
I am attempting to install 32 bit ubuntu 10.04-i386.iso from boot on a Windows XP Pro standalone desktop PC. I have unused hard drive partitions available for the ubuntu installation. At one point the installation dialog box informs me that there is no OS installed on the PC, and the installation program does not correctly indicate the existing Windows hard drive partitions. At that point I abort the installation process.Can anyone advise me how to proceed from this point. I am an old MSoft OS user from way back - I started when DOS was all that there was. I am a complete novice however where Ubuntu is concerned.
View 1 Replies
View Related
Jan 12, 2011
I have a Ubuntu 10.10 live cd for 32-bit. However it does not work with my system--I am guessing it has something to do with having more than 4 gigs of ram.
Anyway I am wondering if there is a way to install ubuntu 10.10 64-bit with Windows 7 64-bit.
View 4 Replies
View Related
