i believe there was a ? and answer on how to modify U 10.04 so it will boot up with screens that look like it did on 9.01 or some other previous release. Looked through 175 posts on 10.04 install, but couldn't find it. Does anyone remember or know how to do this? The earlier release looked much better to me.
View 3 RepliesI want to install (or compile myself) a previous kernel release (2.6.31.13). Where can I get it?
I mean a Debian Kernel with all your patches etc.
I'm using Debian Unstable. I just noticed that it was the quickest kernel (well, maybe for me only and my hardware).
Over the last two months I've been trying out Ubuntu 10.04 32bit using Wubi under my current Windows 7 32bit OS, and I'm at the point where I want to reformat and partition my HDD making Ubuntu my main OS (with a very small partition for Windows 7 on the side for certain things).I was just wondering if it is somehow possible to export all my current settings and preferences for my current installation of Ubuntu so that once I've reinstalled it, I can import them and everything will be the same as it is now (I hope that made sense...).I'm not too fussed about reinstalling apps and things, just all my current settings and preferences.Oh and also, (this might not be the place to ask, but I know you'll probably be able to answer this as well) is there anything I can use to do the same export/import process with my Windows 7
View 3 Replies View RelatedI updated to new ubuntu with the selection to leave the previous version untouched... At boot I try to log into previous version and all I get is 11.04... I dont like the new Ubuntu and I want to uninstall but how?
View 3 Replies View RelatedI have the Ubuntu 9.10 installed and another partition where I want to have Fedora.
But I would like to install it without messing up with the Grub 2 bootloader that I already have there.
Is it possible to install Fedora and then add it to Grub 2? If so, how can I do that?
I downloaded the latest release, burned a disk and successfully booted. When it comes time to choose a partition I don't have the option of replacing the old release. I can install in parallel leaving both but can't use the whole disk. Interestingly enough I CAN replace the windows installation. Of course I already have Grub installed but I don't see how this would affect installing. I read the article here [URL] and it seems I may have missed a step. However it's implied I will lose the current Grub installation. Is that the case?
View 5 Replies View RelatedI can't install Ubuntu 11.04 32bit Desktop edition on my Dell Mini 10v. I followed the instructions from the Ubuntu website and made a bootable USB drive using the universal USB installer for windows. I put the usb drive on my netbook and prompted the boot options to boot from the usb drive. Once I got to the installation screen and attempt to install ubuntu on my hard drive it goes blank for a few moments, and a wall of text floods my screen and it stops installing.
View 9 Replies View RelatedI just installed the newest Ubuntu release through the update manager and, after the restart, GRUB won't load. Before GRUB would normally load I get the message: error: the symbol 'grub_xparts' not found grub rescue> How can I fix this? Background: Running an XP and Ubuntu dual boot with the two OSs on different hard discs.
View 9 Replies View RelatedI installed Natty Narwhal from a pendrive I set up, which was a bit of a messy install to begin with. However, after booting into Ubuntu, this application called "Install RELEASE" appears. When I run it, it shows up just like I'm installing Ubuntu again. After following it through, it will stop and say that it must unmount /. It offers two options, Go Back, or Continue. Picking either does nothing. This hasn't seemed too big an issue. I can still run it fine. However, the Software Centre is an issue. Whenever I try to download something from it, I get this error:
[Code]...
I finally did it. I took the plunge and moved away from MS and installed openSuSe on my system. I have a Gateway 650 with 160 MB of ram and yes it did install! To top it all off it also boots to Windows XP. This was all working fine until I < me < myself < yes I am a gonna admit >>USER ERROR<< booted the system into windows and I decided to see if my system needed to be DEFRAGGED. Yup I did.. I ran the defrag on the system and when it was all said and done my NTFS file system was all nice and pretty no more fragmented files.
So I decided to reboot the system to see that wonnerful boot loader of openSuSe and I chose the 11.2 to boot to and I get the message that the previous installation failed and it starts to run the script to "fix" the installation. It hangs on around 4% the installation. I hit ctrl alt del and it boots into the openSuSe partition and it seems to be working, but I have that durn annoying screen of the "previous installation failed". Are there any ideas on how to as my GF 4 yr old daughter says "flix it"? Or do I have to go through the PAINFULLY SLOW installation again?
I'm planning to install Fedora 11 Release Candidate on my computer because I really need a working Linux system, right now. Once the final version is released, will I have to do a fresh install or do I just update the packages on my system to get the final version?
View 1 Replies View RelatedIf I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View RelatedMy latest update (this am) included a chromium update. Chromium now will not do much, gets hung up on most searches, can't access gmail and a few other misc strange things so I thought I would try to go back a version, since it is in .archives. I deleted the current version 5.0.393, and trying installing the older version, and it said it wouldn't cause a newer update is available. I tried reinstalling the newer version again, with no luck.
View 9 Replies View RelatedI have ubuntu 9.10 on my machine. Haven't used it for ages and no longer have password to install updates through update manager. I want to install 11.04 which i have downloaded but can't install it because i didn't install all the previous updates and don't have that password. My question is how do i uninstall 9.10 completely so that i can start from scratch with 11.04.
View 1 Replies View RelatedIs there an easy way to revert to a previous installation of programs? I installed a couple things and upgraded a couple things that my system didn't like... I could probably try to use /var/log/apt/term.log to try and do it by hand, but is there an automated way to do it?
View 1 Replies View RelatedI had been using ubuntu for quite a while.But alas , I had to switch to WinXp when I started learning VS using its IDE.I installed Windows over Ubuntu wiping its grub.I hoped I will repair grub when I would need to.Now when I boot from Live CD to install grub it can't find the installation present.Moreover,when I try to make a fresh installation it can't find any Operating System in the HDD and asks to format WHOLE.. hard disk to make partition table and continue installation.
View 9 Replies View RelatedI had an installation of Ubuntu under windows via wubi, after an update last week it wouldn't boot up at all, I tried everything I could find about how to fix grub, none of which worked, after looking at a working installation of Ubuntu with wubi I realised that my root.disk file had dissapeared.
I gave up and decided to get rid of windows all together, and now have a fresh 'proper' install of Ubuntu, but that root.disk file has turned up in a file called 'found'.
Is there any way I can mount that file in ubuntu to retrive the documents etc that I thought I had lost?
I upgraded my Ubuntu server install to 11.04 and could not connect to anything outside of it. Its a weird issue because if I run a ping against it as its booting up for about 20 seconds or so I get responses, then it says unreachable. (This is a wired connection by the way). If i login fast enough on the server itself I can ping google for instance and get a response, then it just stops and says host unreachable from that point on.
I then decided to setup a fresh install on the system (virtual server) and I get the same issue. All throughout the install it connected fine, just up until it fully restarts. Its like some service starts that just kills the connection. I rolled back to 10.10 on my other instance and it can connect fine.. Ive been trying everything I can find on the forums but I am pretty stumped by this,
I recently upgraded to 10.04 on my older laptop. It's causing some unacceptable slowdown. So I'd like to go back to 09.10.
View 3 Replies View Relatedusing Ubuntu 10.04 for a week ,I started to download some package from ubuntu software but i could not download them ,then after searching in the internet i tried a few of them but none of them worked .Finally I gave this command sudo dpkg --configure -aand I got a reply asdpkg: status database area is locked by another processthen I gave this command cat /etc/apt/sources.listand got a reply as# deb cdrom:[Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)]/ lucid main restricteddeb-src http://archive.ubuntu.com/ubuntu lucid main restricted #Added by software-properties# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
View 1 Replies View RelatedI used to have 2.6.34-12-default kernel. Recently I downloaded and installed 2.6.35.1-1.1 DEBUG kernel. Because I cannot either use pre-compiled packages or compile new package from source, I want to go back to 2.6.34-12-DEFAULT kernel.
View 7 Replies View RelatedI'm looking for suse 9.3, was looking around the download section and couldn't find it.
View 7 Replies View RelatedI am running Fedora 12 and I am trying to install the DHCP. well I use the yum -y install dhcp command and this is what I get "Transaction Check Error: file /user/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686
file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686"
I am a newbie at this and I tried the yum remove, yum update and the yum update says dhcp packages available but not installed.
I was running Ubuntu 9.10 and had the MySQL datadir moved to a different directory, /store/mysql. Due to a filesystem problem on the upgrade to Ubuntu 10.04, I was forced to reinstall. My /store/mysql was copied back over, changes to /etc/mysql/my.cnf and /etc/apparmor.d/usr.sbin.mysqld, but MySQL hangs when I go to start it and nothing is showing up in any of the logs. How do I get MySQL to recognize the datadir from the previous install?
View 1 Replies View RelatedI've got version 1.2 of package dtc. I installed it using apt-get install. But I want version 1.1 of it installed instead. How do I get that?
View 5 Replies View RelatedI've been trying for a couple of days to find out how to install the new release of amarok 2.4.0 in my Ubuntu 10.04. It looks like it is not supported! Is that true? I thought 10.04 was supposed to be a long term support release.Amarok 2.3.2 didn't really work for me, it was too buggy and it seems to be the only release i can install at the moment.
View 4 Replies View RelatedIn the control center under System, I have the option: "Install RELEASE". Why do I have this? Yes, I did have Natty Beta2 previously, but since it's official release today I would assume I now have the Release Candidate installed as I have done all the available updates.
View 5 Replies View RelatedI updated to Thunderbird 3 by following instructions from http:[url]....Everything updated nicely, but in menu I don't have Thunderbird anymore - there is Shredder instead.Also Firefox was automatically updated - with change of name to Shiretoko with different icon. Wanted to make sure I added safe repositories, and why these changes?
ps. i checked some websites and seems like it is installing alpha/beta versions. so since it is not working now - how do i revert to previous versions without losing data, and how do i install thunderbird 3.0 then.
Since m computer updated FF to 3.6.x FF runs really slowly if a page with java/js or flash opens. It gets so slow I can hardly use it at all. This is a known problem that many people are complaining about, as seen here:
[URL]
I would like to depreciate back to 3.5.8 or 3.5.9 until this issue is resolved, as currently this is preventing me from working the internet on my websites, etc. How can I get a previous version of Firefox to install? Using Jaunty 9.04
I was preferring Abiword so I uninstalled OpenOffice but have discovered that Abiword can't deal with larger documents so am trying to reinstall OpenOffice and got the error messagePrevious installation hasn't been completed.The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.
View 2 Replies View Related