Ubuntu Installation :: Grub Timeout Not Working After Upgrade From 10.04 To 10.10?
Oct 17, 2010
Yesterday I upgraded from 10.04 to 10.10 (x86_64). The upgrade itself succeeded, but now after booting I have to press enter in the grub OS list. grub.cfg looks like this:
Code:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
[code]...
Why do I have to press enter to have grub boot the default entry? How can I get grub to start the default entry automatically, without showing the menu? BTW: entries in the list are default:
Code:
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
Just installed kubuntu 10.4 on a netbook (dual booting with WinXP) but by default grub just boots directly into kubuntu. When editing /etc/default/grub I have tried setting the timeout to 10, 100 and now its at -1 (which should be sit there forever)I then run update-grub which generates the new config reboot and the same thing happens, it immediately boots to kubuntu. I see the menu appear for a split second, but no matter how fast i try, i cannot see to hit any button fast enough to kill the timeout so i can switch to XP.
I am running Ubuntu 10.10. Grub timeout is not working and I have to press enter every time I switch on the computer after the Grub menu loads. Here is my /boot/grub/grub.cfg file
# # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub[code]......
I have an RHEL 4 server now running 2.6.9-89.0.18. After installing the kernel and rebooting to make this the current kernel, the grub menu to choose the kernel failed to offer a countdown and did not choose the kernel as it should have. I had to manually select the kernel.I inspected the grub.conf file and could not find any clue as to why it didn't work. The timeout directive is there, and the syntax matches other systems we have with the same kernel and OS.Can anyone provide any insight as to what else (other than a typo on the conf file) would cause this?The only difference between the way the kernel update (and the subsequent changes to the grub conf file) took place was a manual install of the RPM on the affected system, versus pulling it down from RHN using up2date.
I have been running a dual boot system Win 7 and Ubuntu 9.10 for months on 2 different systems. I just upgraded 1 system to 10.04. I had it set so that the grub boot will boot to the last selected OS. With 10.04 this no longer works. I went in and edited the etc/default/grub reset GRUB_DEFAULT=savedthen ran update-gruball seemed to work properly.but all boots always boot the top line (ubuntu) I must always manually select Windows 7 everytime
Is the "saved" option for grub2 not available after the new upgrade?I had grub2 setup to let me load either windows or ubuntu, whichever I last used, and it worked.After the last update to Ubuntu I cannot get this to work anymore. I can successfully change the default boot entry by entering a number, e.g. "GRUB_DEFAULT=3" but when I put in"GRUB_DEFAULT=saved" it always defaults to the first entry, the latest Ubuntu. I can also change the screenresolution for the grub menu on this computer, but on another computer I cannot change the screen resolution for grub or restore the 'saved' option (I have not tried to change the boot default by numbers on this other computer though). I am only editing /etc/default/grub and running update-grub, is there another script or file I should be changing as well since the update?
pulled up an old clunker and put centos 5.4 on it the other day. well the grub spash screen appears but i have to manually hit enter to select a kernel.at the /boot/grub/grub.conf file and timeout=5. this is a new install. so I tried changing that value to 0 and it does boot the kernel immediately but never displays the splash screen. so something is not right I assume. btw I see a message (loading stage 2) for about 20 seconds as the computer boots and I have never seen that message on my ubuntu machine, so I wonder if something is off there.
Im trying to run a headless box but grub has no time out so it sits until I plug in a keyboard and hit enter. I have tried to put a timer on using 'startup-manager' but this seems to be ignored.
When it boots I get GNU GRUB version 1.99~rc1-13ubuntu13 and a list of operating systems. Unless I hit enter it will wait forever.
I have a dualboot system with Ubuntu and Windows 7 (grub bootloader). I updated the firmware in my HD, and now grub doesn't work. After POST, instead of getting the menu of OS options, I get "Non-system disk: press any key."After pressing a key, I get the Windows 7 loader, with only a Windows 7 OS option. Windows 7 boots fine, but I have no way to boot into Ubuntu.
I just installed kubuntu 910 via cd iso. now i want to change the default grub timeout. It says i dont have permission to edit etc / default /grub so what do i do? i dont know how to login as root user.
I am trying to edit grub so that it doesn't timeout the menu. I've found a lot of solutions to this where I edit menu.lst. However, this file is blank when I open it. I just upgraded to Lucid and kept a lot of my old grub settings (I had customized it somewhat). Also, I am not sure if I have grub or grub2. How can I figure this out?
I have accidentally changed the grub timeout to 0 seconds. My default boot is also set to windows xp so there is currently no possible way to boot into ubuntu. how to change the grub timeout without needing to startup into Ubuntu.
I have been unable to locate an answer to the below.Just installed 10.10 server and noticed that during boot each time the Grub Menu pops up. I have to manually press a key on my keyboard each time to get through this menu. This is a big problem as this is going to be administered remotely. here is my /boot/grub/grub.cfg file
Code: # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates[code].......
Now, It seems to me that with the settings above that menu should time out after a few seconds but it is not. I must press enter each time.how I can get this damn thing to timeout after a few seconds?
I have an Alienware M11x r2 laptop running Windows 7-63 and Ubuntu 10.10 Unity installed.It was all fine and dandy until I changed my grub timeout to 1 sec (or perhaps 0, its been so long i can't remember!) to reduce the waiting time until an OS boots.My grub was set to boot to Windows 7 as default.Now when I boot up I cannot halt the boot process not matter what key I press (e.g SHIFT).I am doomed to forever boot into Windows. Its been months and I had written off my Ubuntu OS but I am tempted to try and fix this one more time.Since I cannot access the Ubuntu installation AT ALL I cant use the usual ways to increase the timeout on the grub menu (yes I have searched the forums far and wide).
Is there ANY way of changing the grub menu parameters without actually booting into Ubuntu Unity? Can I modify the timeout settings using a live cd or usb boot?
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
The code is attached..My intention is that getchar which usually blocks,should come out after 5 seconds(VTIME).But this is not happening..can anyone tell me the mistake that I make..?
OKI am loading 9.10 (K or U, makes no difference). This installs 2-6-31.14. Eventually I am unable to dissuade APT from upgrading to Grub 1.97 beta4. One of two things can happen.
1) I am upgraded to a later kernel at the same time (currently 2-6-31.1. This singularly fails to work, in that I end up with no working kernel at all and I can only run memtest (or Windows 7, which is about as much use): good for the soul no doubt, but frustrating. "Solution": tar up the whole of /boot beforehand and then reinstate it afterwards. I am back to square 1, but at least a working square 1.
2) I persuade APT not to upgrade the kernel.I then get 14 (and 14 recovery) in my grub.cfg, but boot fails dramatically, and it becomes apparent that it has forgotten about /dev/sda, my hard disk.Further investigation shows that I have a new initrd.img in /boot, which doesn't work properly; reinstate the backup version, and all is well.What is going on? Is it just me? How come there aren't crowds of protesting peasants with pitchforks outside Canonical Towers?
When I upgraded my system for the first time, I got a message asking me to decide between a few menu items for configuring grub-pc. When I chose to keep the current version installed, GRUB booted to a CLI. What menu item should I choose?
I performed an upgrade via the Update Manager from 9.10 to 10.04 LTS and it seemed to go flawlessly. However, now I cannot seem to be able to remove the old Kernel from 9.10 in the package manager. It does not even show 2.6.32-21 as installed but it still shows the old Kernel in Grub. I did a sudo update-grub but it was to no avail.
I keep finding the same fixes on the web and they are not working. What I have/what I did: I have a dual boot PC. HD0 was XP. HD1 Kubuntu 10.04. I upgraded XP to Win 7. This jacked my Grub up, now all I can load is Win 7. I don't see the Grub menu anymore. I've been trying to reinstall Grub using varoius web pages like: [URL]
They seem to all be telling me the same thing but not working. I boot into a liveCD. I have to sudo apt-get install grub then I can do sudo grub. I follow the instructions: sudo grub > root (hd0,0) > setup (hd0) I get "Error 17: Cannot mount selected partition".
Now if I'm understanding this right the reason for that is. HD0,0 is my first HD first partition (which is Win 7), and grub doesn't like windows. I tried swapping it out so it reads: sudo grub > root (hd1,0) > setup (hd1) I then quit and reboot. Win 7 loads. I don't see Grub.I am using 2 separate hard drives?
After upgrading from Ubuntu 9.10 to 10.04, windows XP boot option is missing from the boot loader window. The laptop has two ntfs partitions - one for windows recovery and the other one for XP. The recovery option is available in the boot loader. But XP is missing. I tried several suggestions from different forums but to no vail. Can somebody help ? The output of boot_info-script follows:
I'm running Ubuntu 9.10 and did an upgrade yesterday via the Update Manager. Just installed all proposed upgrades. After rebooting, my newest kernel throws an error 16: inconsistent filesystem structure. When I select my previous kernel from the GRUB, no problems. How do I debug this error? Or better yet, how do I fix it?
I decided to go ahead and upgrade my 9.10 amd64 to 10.04 ( a little late in the game I know, but I liked Karmic) Well I goofed when prompted to upgrade grub. After reading some other posts about various grub issues, I did the Boot Info Script (results posted below).
Code:
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
[code].....
I have a external usb with a Ubuntu OS on it that I was able to boot into and do some digging. When I upgraded I selected the NTFS partition instead of the actual /boot partition and jacked it all up. Im currently downloading the 10.04 liveCD to repair the grub on the /boot after I repair the MBR on the NTFS partition. Hopefully I can attempt to repair my Linux partitions by reinstalling the Grub that is on the 10.04 liveCD WITHOUT formatting my current partitions and still be able to keep all my current configurations.
I had installed Ubuntu 10.04 within Windows 7nd everything work perfect until this morning. When I turned my laptop on I was told that Grub could'nt find the storage device and was presented with a grub command line
I upgraded to 10.10, and grub just came back with "no wubildr", and then a "no other mode", or something like that. I dual boot xp (I used it to install wubi), and I need a few files off my linux partition. Is there a way to:recover my files within windows skip grub and go strait to ubuntu
I started off on 9.10 and upgraded to 10.4 without any problems. However during the upgrade to 10.10 got asked about grub (see attachment 1& 2) and I think I should have ticked the other boxs but I didn't. I also got an error (see3) The 4th one I think is a different issue.On the restart it would only get to the purple screen before the login field appears. I presume I need to do something to the grub but have no idea what.My system is 64bit and a raid 1. The attachment 5 shows the partition arrangement I can boot into the the PC with a live (32bit 10.10) cd.
