I had installed Ubuntu 10.04 within Windows 7nd everything work perfect until this morning. When I turned my laptop on I was told that Grub could'nt find the storage device and was presented with a grub command line
View 4 RepliesI currently have a Dell Dimension 4100 from 2000 upgraded with an Nvidia Geforce 6200 video card and 160 gig hard drive, I just upgraded to Ubuntu 10.10 from 10.04 and once I restart, I hear a beep come out from my computer speaker, and then displays the following text:
Code:
GNU GRUB version 1.98+20100804-5ubuntu3 Minimal BASH-like line editing is supported. For the first word,TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub> I'm not used to typing in command line, but if anybody has a way around it for me, I'll be pleased. It's Ubuntu or Windows goes back on... or bust.
I am dual booting windows 7 and Ubuntu, and since the upgrade from 9.10 to 10.04 Windows 7 won't load.I tried the solution posted in another thread with a similar problem but to no avail.[URL]
View 9 Replies View RelatedI've just tried to upgrade my Fedora 9 (x86_64) installation to Fedora 10 using the installation DVD. The upgrade seemed to proceed very smoothly, no errors ,nor warnings, it just seemed that it is upgrading grub (yes, I chose to upgrade grub as well) and all the packages (it took about 20 minutes). However, after the upgrade was over, it asked me to reboot my computer, so that's what I did, I took out the DVD and waited for GRUB to load.
It loaded just fine, but I was quite surprised when there was no option to boot Fedora 10 in the list. Ok, so I booted into Fedora 9 which went fine, the layout changed to the new one and some programs don't run. When I looked into /lib/modules I couldn't see any fc10 kernel installed. So the question is what happened and what should I do, so that it upgrades to fc10?
When I start my computer GRUB starts, but it only says:Grub Loading stage1.5.Grub loading, please wait...and nothing happensHere is what happened before:I had a dual boot on my computer with Windows and Ubuntu. There was also a problem with Windows, but that's another thing. Now I had not upgraded Ubuntu for a long time. I think I still had Ubuntu 8.9 . So I wanted to upgrade and let Ubuntu do it automatically, it showed the upgrade to 9.4. So let it upgrade, but it asked if it had to change menu.lst, but since I had menu.lst modified in the right way, I choose the option to keep the already installed version. But it just kept asking the same question, so 4 or 5 times and a few hours later I choose the option to change it to the default package version. Then it didn't ask this anymore, but it hung at a later stage.
So I waited several hours longer, but it didn't proceed anymore, so I had to shut it down.It shut down OK, but then when I restarted, what I described above happened.Now I have another problem, my disk reader (CD/DVD) doesn't work either, so I cannot simply use a LiveCD.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
First the hard data:
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager
System is AMD 64
Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore.
Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
So after having performance issues with Karmic in ext4 I decided to install Hardy with ext3. Was blazing fast, epic, I loved it. But I wanted firefox 3.5 & all the other cool stuff Karmic has.. so I decide to install Karmic, but this time with ext3 instead of 4.
First installation: After the installation went fine, no errors while installing or anything. I remove the CD and reboot. "GRUB Loading, please wait.. Error 15" I did my googling, with the live CD to try and figure out a way of fixing this error. No luck. I did find out that the error is caused by the GRUB trying to load form the wrong drive. So I try to boot directly from the Karmic drive, Error 15. Try to boot directly from the Windows drive, Error 17.
This is the first time this has ever happened to me. First time installing Hardy, everything went great. Installing Jaunty, everything went great. Installing Karmic (for the first time) everything went great. Uninstalled Karmic and installed Hardy, everything went great. Uninstalled Hardy to install Karmic = FAIL!. I did a clean install every single time. The OS is being installed (clean) in the same drive.
A 40GB drive for Windows. A 200GB drive for Ubuntu +/home +swap, and a 120GB(FAT32) for storage.
I installed Karmic 3 times, yes.. 3 times. The last time I installed I removed both the 40GB & the 120GB drives. Leaving only the one I was going to use for Ubuntu, the 200GB drive. After the installation I rebooted and Karmic loaded without problems. I'm in Karmic right now and it isn't all sluggish like it was with ext4, guess my old drives aren't good with ext4 *sight*.
But I can't use my Windows drive. When trying to boot directly from it, it gives me "GRUB Error 17" - I have to disconnect the Ubuntu drive to boot into Windows. Quick question: What the **** is going on?
Someone help, please.. I'm tired of this ****.. and if I have to install Karmic one more time, I won't. I'll just give up and disconnect my Ubuntu drive, put it away and let it accumulate dust somewhere, seriously.. Someone help me correct this without having to install the OS again.
The GRUB error is while the GRUB is loading. It doesn't give me the option to select a OS.
I have successfully upgraded from 10.10 to 11.04, computer was rebooted and I got working Ubuntu Natty. I did not altered any settings and switched computer off. When I tried to boot computer today I got Ubuntu load screen, but OS does not load properly (only load screent, startup sound and that's all).I am able to load terminal as root. How can I troubleshot my problem?
View 1 Replies View RelatedI' ve tried to do a iso multiboot 1gb pen stick with grub2 bootloader. I 've already readed all is it possible finding on the WWW but there are some problems i don't understand how to solve.
This is my sitution:
-koala 32bit installed on my pc with grub2 bootloader
-1gb pendrive parted as follow:
In the first fat16 partition there is installed grub2. On the second ext2 one there are iso files.
This is what i've do to install grub2 on my pen:
So i've created /boot/grub/grub.cfg file with the follow lines:
When i reboot by the pen stick, grub load up to it says me:
It seems not reding /boot/grub/grub.cfg
So I have been using Ubuntu for the past couple of months using Wubi, mainly because my parent's are afraid that I'll screw something up on the computer if I partition the hard drive and stuff like that. And Today I installed the latest updates for 9.10, asked me to restart the computer, and now whenever I try to boot using the latest kernel GRUB keeps telling me to "Load kernel first". The funny thing is that I can boot with the older kernel fine, But I would really like to get the lates updates, which I can't using the older kernel.
View 9 Replies View RelatedSo I have an MBR that is Grub legacy,(from HardyHeron) and I cannot edit/upgrade this MBR. (I won't get into the reasons, other than I will mention SafeBoot).
I have a new encrypted LucidLynx Linux installation on partition 4 and an unencrypted /boot partition on partition #3.
When I boot up, I get the "Error 15" Grub error, which is expected as Grub legacy is looking for /boot/grub/stage2 or something like that and /boot/grub/stage2 does not exist in my GRUB2 installation in /boot/grub.
I thought if I could make a link from the GRUB2 binary of interest to /boot/grub/stage2, then maybe the GRUB legacy would be tricked into loading the GRUB2 binary.
what is the binary of interest in the GRUB2 installation that is the main binary?
i have Vista 64Bits Ultimate installed on an 1TB hard disk whit 3 partitons I have a 2nd 160GB HD in my system which i installed Ubuntu 10.4 on. All went ok, except after the installation finished and the system rebooted it booted straight into windows, whitout ever displaying GRUB. Now i found a way to boot either system, by using the bios and setting the applicable HD to 1st device. (or something similar)
Any way on how to solve this? keeping to have to enter the BIOS to select the HD and Thus OS i want to boot aint very practical. (im currently using ubuntu BTW)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
[code]...
After installation of Ubuntu 10.10, grub loads and has the right menu list. However, Ubuntu doesn't load and I get an error message of :Gave up waiting for root device. (with a list of common problems)There is also:ALERT! /dev/disk/by-uuid/1584598e-b8e5..... does not exist.
View 9 Replies View RelatedI have just installed Ubuntu, now when logging into my laptop i am able to sucsessfully load ubuntu but i am unable to load the original OS (windows 7).
The grub 1.9 bootloader gives me the option
When selecting this option it goes to a black screen with a - in the top left of the screen then the grub screen re-appears
I have ran the boot_info_script.
Code:
Boot Info Summary:
I just installed the newest Ubuntu release through the update manager and, after the restart, GRUB won't load. Before GRUB would normally load I get the message: error: the symbol 'grub_xparts' not found grub rescue> How can I fix this? Background: Running an XP and Ubuntu dual boot with the two OSs on different hard discs.
View 9 Replies View RelatedThis is my fourth variant of trying to get Ubuntu installed and i have lost how mant different steps of troubleshooting I have done.
I could attach a long list of specs but will wait for someone to request what thewy need. At the Livecd Enviroment ATM
I have gone back to a basic partion layout because i thought Raid1 > LVM may be causing issues.
Now installing on a single 750GB Drive:
Partioned
4GB - Swap
50GB /
rest /home
Every install drops me at the grub rescue> prompt.
I can boot the livcd I installed from no problem.
Grub rescue troubles:
I can ls and find the partions of the drive lablled
(hd0,msdos3) - home partion
(hd0,msdos2) - root partion
(hd0,msdos1) - swap area
ls (hd0,msdos2)/boot/grub - Lists the .mod's and both Linux and normal are there.
Issue comands:
set prefix=(hd0,msdos2)/boot/grub set root=(hd0,msdos2)
insmod normal Error 'Invalid object type'
insmod linux Error 'Invalid object type'
Tried to point via full path
insmod (hd0,msdos2)/boot/grub/normal.mod [I]ALSO [/I ]linux.mod
Brings back the same error. Error 'Invalid object type'
Tried to load from /usr/lib/grub/i386-pc
Again! gives the same error.
I just finished my Windows 7 reinstall, and I go to reboot into Linux, and there's not grub loader. I go into a live CD and get into the grub prompt. Here's what I got:
sudo grub
grub> root (hd0,0)
grub> setup (hd0)
Error 17: Cannot mound selected partition
As for additional information, my fstab is listed below:
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
/dev/sda6 swap swap defaults 0 0
I successfully installed Ubuntu 9.10 Netbook Remix on an Asus EeePC in a dual boot mode with Windows XP. Because the computer has no CD drive, I used a USB stick to download the files for installation. Twice now, after upgrading to a new kernel (2.6.31-17 and 2.6.31-19 I think), when rebooting after the upgrade and selecting Ubuntu from the operating system menu, I get a message:
sh:grub>
along with a notice about limited shell commands being available. The ls command results in:
(loop0) (hd0,3) (hd0,2) (hd0,1)
In trying some of the other commands, I get a message that a linux kernel isn't loaded. The computer still runs Windows fine - or at least as fine as Windows ever runs. I'd like to recover Ubuntu without doing another full installation.
I previously had Ubuntu 9.x and Windows 7 installed at my laptop after I decided to upgrade Ubuntu to 10.04.
After the upgrade finished, now at the boot selection menu I am able to select Windows 7, but after it starts it tries to fix some errors and says that it's unable to load. Ubuntu 10.04 loads just fine.
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x97646c29
[Code]...
I had a 10.04 Wubi install on my Win7 notebook. I selected the option to upgrade to 10.10 from update manager. It downloaded all the updates, but reported that due to some problem, only a partial upgrade will be possible. I agreed. And now, when I select Ubuntu from the startup OS list, it just shows a blank screen and restarts within 3-5 seconds. What do I do??
View 5 Replies View RelatedI upgraded my laptop from 10.10 to 11.04 yesterday. On the reboot part of the installation and on all subsequent boots, the loader gets as far as the initial Ubuntu splash screen before switching to verbose mode and dying in interesting ways.
If I boot using wireless, the display flashes six times, then sometimes hangs around before reporting: iwlagn 0000:08:00.0: Aggregation not enabled for tid 0 because load = 4 (this number can be anything from 0 to 10)
If I boot using a network connection, I get the same splash screen and six flashes before the system hands, usually at the message: Stopping userspace bootslash [OK]
I am not keen on reinstalling from CD except as a last resort as I have a number of files that I do not want wiped.
Just update ubuntu to beta 1. When I try to load win7 it just all a get is the blinking underscore in the top left corner. What did i do wrong?
[Code]...
I installed Ubuntu 11.04 on a separate partition, with Grub being in it own partition. When I start the PC only windows Xp is available. So how do I get grub or Ubuntu load with windows xp boot loader? I tried with Live cd, the sudo grub but then it says command not found. I think its because Ubuntu 11.04 uses grub 2.
View 1 Replies View Relatedi have installed debian but during installation my installed windows 10 was not found by the grubloader. i have installed windows 10 on my ssd and the debian on my hdd. nevertheless i installed the grub loader on the master boot record, because it said i could still configure it so it can boot both the windows and the debian.The debian installation is running fine. But i now want to boot the windows too. The problem is i have never worked with the grub loader yet and i am little scared that i will do something wrong.How can i get grub to load my windows ?
View 9 Replies View RelatedI had Win XP on my T61. I installed Fedora 11 from Gnome LiveCD. Now I cant even see GRUB. The laptop boots directly into Win XP. I had the partitions like this:
/dev/sda1 - Win XP - NTFS - 75 GB
/dev/sda2 - Win Recovery - NTFS - 5 GB
/dev/sda3 - /boot - ext3 - 1 GB
/dev/sda4 - Logical extended partition
/dev/sda5 - / - ext4 - 10 GB
/dev/sda6 - swap - 3 GB
Installed GRUB on the MBR (/dev/sda, and not on any partition). Once I completed installing Fedora 11 from the LiveCD and rebooted, the laptop directly boots into Win XP. No sign of Fedora there. How do I get to install GRUB now?
After I do a fresh install of Fedora 10 and reboot the computer, nothing happens. All I get is a blinking cursor at the top of the screen. It's like Grub is messed up and won't load. Grub is installed on the Master Boot Record of the drive I need to boot from.
I have an ASUS P4C800 motherboard with one SATA drive that Fedora 10 is installed on. I also have a HighPoint RocketRaid 1740 SATA RAID controller card. When I take the RocketRaid card out, everything boots like normal, but when it is installed all I get is a blinking cursor at the top of the screen. I need the RocketRaid card because it houses my RAID5 array with all my documents. The reason I got the RocketRaid card is because it has linux support and my motherboard was listed on their compatibility chart. I had this exact same setup running Windows XP and everything worked fine. I did not load any drivers for the RocketRaid card and was going to do that after the system was setup. I don't know if that is the problem since the installer does not see the raid array on the RocketRaid during install. I was thinking that maybe Grub is seeing another disk and doesn't know what to do and sits there with a blinking cursor.
I don't know where to go from here and I am a linux newbie. On a side note. If anyone knows of a good linux book (specifically Fedora), please let me know.
I have Windows XP, Vista and Ubuntu (10.04) all installed on my single hard drive. I re-installed XP and then ran the Vista CD to repair the Vista bootloader so that I could boot into XP and Vista. I can't figure out how to boot into Ubuntu now. I tried using EasyBCD (I believe an older version, maybe 1.72) to add Ubuntu to the Vista bootloader but I didn't have any luck. Ubuntu is in the menu, but when I select it, it goes to a screen that has GRUB in the upper left corner and does not load Ubuntu.
If it helps, before I re-installed XP and re-installed the Vista bootloader I was using GRUB for XP, Vista and Ubuntu because Ubuntu was the last thing to get installed.Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot InfoSummary:===============================> Windows is installed in the MBR of /dev/sdasda1: _________________________________________________________________________File system: ntfsBoot sector type: Windows Vista/7B
I try to install to my desktop as Squeeze/ISPConfig3 server, but GRUB does not load after several re-installations.
I have
- 6 x 500GB HDs
- ASYS A8N-SLI Bios SLI-RAID active as only then RAIDSata1-RAIDSata4 can be seen 2 x RAID1 (has to have something) and all drives can be seen by Debian-installer as individuals Same has been working with LinuxMint (both LM10 and LM Debian Edition) (with and w/o fake-RAID)
1st test: Guided partitioning (LVM) for one disk (where /boot will be separated) => Installation OK and starting.
[Code]....