I am running Ubuntu 10.10. Grub timeout is not working and I have to press enter every time I switch on the computer after the Grub menu loads. Here is my /boot/grub/grub.cfg file
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub[code]......
Just installed kubuntu 10.4 on a netbook (dual booting with WinXP) but by default grub just boots directly into kubuntu. When editing /etc/default/grub I have tried setting the timeout to 10, 100 and now its at -1 (which should be sit there forever)I then run update-grub which generates the new config reboot and the same thing happens, it immediately boots to kubuntu. I see the menu appear for a split second, but no matter how fast i try, i cannot see to hit any button fast enough to kill the timeout so i can switch to XP.
View 1 Replies View Relatedhere is my grub.con
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[code]...
Yesterday I upgraded from 10.04 to 10.10 (x86_64). The upgrade itself succeeded, but now after booting I have to press enter in the grub OS list. grub.cfg looks like this:
Code:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
[code]...
Why do I have to press enter to have grub boot the default entry? How can I get grub to start the default entry automatically, without showing the menu? BTW: entries in the list are default:
Code:
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
I have an RHEL 4 server now running 2.6.9-89.0.18. After installing the kernel and rebooting to make this the current kernel, the grub menu to choose the kernel failed to offer a countdown and did not choose the kernel as it should have. I had to manually select the kernel.I inspected the grub.conf file and could not find any clue as to why it didn't work. The timeout directive is there, and the syntax matches other systems we have with the same kernel and OS.Can anyone provide any insight as to what else (other than a typo on the conf file) would cause this?The only difference between the way the kernel update (and the subsequent changes to the grub conf file) took place was a manual install of the RPM on the affected system, versus pulling it down from RHN using up2date.
View 11 Replies View Relatedpulled up an old clunker and put centos 5.4 on it the other day. well the grub spash screen appears but i have to manually hit enter to select a kernel.at the /boot/grub/grub.conf file and timeout=5. this is a new install. so I tried changing that value to 0 and it does boot the kernel immediately but never displays the splash screen. so something is not right I assume. btw I see a message (loading stage 2) for about 20 seconds as the computer boots and I have never seen that message on my ubuntu machine, so I wonder if something is off there.
View 4 Replies View RelatedIm trying to run a headless box but grub has no time out so it sits until I plug in a keyboard and hit enter. I have tried to put a timer on using 'startup-manager' but this seems to be ignored.
When it boots I get GNU GRUB version 1.99~rc1-13ubuntu13 and a list of operating systems. Unless I hit enter it will wait forever.
I just installed kubuntu 910 via cd iso. now i want to change the default grub timeout. It says i dont have permission to edit etc / default /grub so what do i do? i dont know how to login as root user.
View 7 Replies View RelatedI am trying to edit grub so that it doesn't timeout the menu. I've found a lot of solutions to this where I edit menu.lst. However, this file is blank when I open it. I just upgraded to Lucid and kept a lot of my old grub settings (I had customized it somewhat). Also, I am not sure if I have grub or grub2. How can I figure this out?
View 4 Replies View RelatedI have accidentally changed the grub timeout to 0 seconds. My default boot is also set to windows xp so there is currently no possible way to boot into ubuntu. how to change the grub timeout without needing to startup into Ubuntu.
View 6 Replies View RelatedI have been unable to locate an answer to the below.Just installed 10.10 server and noticed that during boot each time the Grub Menu pops up. I have to manually press a key on my keyboard each time to get through this menu. This is a big problem as this is going to be administered remotely. here is my /boot/grub/grub.cfg file
Code:
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates[code].......
Now, It seems to me that with the settings above that menu should time out after a few seconds but it is not. I must press enter each time.how I can get this damn thing to timeout after a few seconds?
I have an Alienware M11x r2 laptop running Windows 7-63 and Ubuntu 10.10 Unity installed.It was all fine and dandy until I changed my grub timeout to 1 sec (or perhaps 0, its been so long i can't remember!) to reduce the waiting time until an OS boots.My grub was set to boot to Windows 7 as default.Now when I boot up I cannot halt the boot process not matter what key I press (e.g SHIFT).I am doomed to forever boot into Windows. Its been months and I had written off my Ubuntu OS but I am tempted to try and fix this one more time.Since I cannot access the Ubuntu installation AT ALL I cant use the usual ways to increase the timeout on the grub menu (yes I have searched the forums far and wide).
Is there ANY way of changing the grub menu parameters without actually booting into Ubuntu Unity? Can I modify the timeout settings using a live cd or usb boot?
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies View RelatedThe code is attached..My intention is that getchar which usually blocks,should come out after 5 seconds(VTIME).But this is not happening..can anyone tell me the mistake that I make..?
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
[code]...
I accidentally set "timeout" to 0 in /boot/grub/menu.lst . have dual booting Debian and WinXP.The default is WinXP.I am not able to reconfigure it. what should I do?
View 2 Replies View RelatedI have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies View RelatedAfter I installed Windows XP on my leftover partition, I decided to reinstall grub2.
Now when I reboot grub throws me in the grub shell, if I then type configfile /grub/grub.cfg it starts grub like its supposed to. Tho I cant seem to be able to go straight to the grub menu and no to the shell.
I tried to use an image of name splash.png as background of grub boot menu. here is my output of `sudo update-grub`
Code:
Generating grub.cfg ...
Found background image: splash3.png
Found linux image: /boot/vmlinuz-2.6.35-25-generic
Found initrd image: /boot/initrd.img-2.6.35-25-generic
[code]....
but still grub boot menu is not showing any background.
I've just recently wiped my hard disk and reinstalled windows and ubuntu. However, the boot manager is not seeing linux at all. I installed windows 7 first (on a blank slate), and then proceeded to repartition the hard drive with an ubuntu live cd and installed linux. The boot manager is automatically booting to windows 7 and is not seeing ubuntu at all.
View 7 Replies View Relatedso im just surfing the internet for a new laser printer when my computer freezes so i do a hard restart. instead of the grub boot loader i get a grub rescue prompt. im back in my system now via super grub disk 1.98 my question is how can i get grub back up and working? im running ubuntu 10.10 on a crucial SSD dual booted with win7 on a hitachi HDD.
View 9 Replies View RelatedI have been running a dual boot system Win 7 and Ubuntu 9.10 for months on 2 different systems. I just upgraded 1 system to 10.04. I had it set so that the grub boot will boot to the last selected OS. With 10.04 this no longer works. I went in and edited the etc/default/grub reset GRUB_DEFAULT=savedthen ran update-gruball seemed to work properly.but all boots always boot the top line (ubuntu) I must always manually select Windows 7 everytime
View 2 Replies View RelatedI have upgraded from 9.10 to 10.04 but I'm still using Grub1 as I came from 9.04.
Anyway, during the upgrade I kept my original menu.lst file when prompted as I have a Windows XP boot option that I wanted to keep. I have read that this means your kernel won't be updated - and indeed mine wasn't.
The new kernel files (vmlinuz-2.6.32-23-generic) are on my machine in the /boot directory. uname -r currently shows 2.6.31-20-generic.
From what I've read you should just need to run update-grub manually and it will install. However, I have done this but it isn't upgraded. It doesn't modify my menu.lst or anything.
Output for update-grub:
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
[Code].....
So it says its updating menu.lst but there is still no entry for 2.6.32-23? Am I missing something?
I have two problems, that I can live with, but they are just annoying for tha afact that I don't know how to fix them.1. My suspend does not work. Hibernation works - after I turn on after the hibernation, screen is blank, I have to move the mouse for the login window to appear. For Suspend, I get to the black screen, but then nothing happens - when I move the mouse or Ctrl+Alt+Backspace, nothing. It is a laptop, if that makes a difference.2. When booting, I get a table of choices - the new kernel, the old kernel, memtests and the long gone windows partition. There is no /etc/grub/menu.lst and I've got no idea how to change this.
View 5 Replies View RelatedI was playing with the Ubuntu side of my laptop, and I was looking a tweaks for it. I saw a program called BURG, Juts the pretty themed version of Grub I guess. Any who. I installed it, Terminal reported no problems. I decided to restart because of other changes I made.My laptop is an Acer Aspire D255, Single Core atom N450, with a Hitachi HTS545012B9A300 HDD, There are two operating systems. Ubuntu 10.10 (personally my favorite.) and Windows Seven Home Premuim. What I'd like to do is save the Windows Side if I can. Or both. But Mainly windows for my iTunes.
View 5 Replies View RelatedI set up my Mac Mini to dual boot Windows 7 and Ubuntu. I started with Windows only, and allowed it to rewrite the partition table (GPT/MBR). When I tried to install Ubuntu, it didn't see Windows until I used Gdisk to delete the GPT portion. Then it recognized the Windows partition and installed Ubuntu as per normal. Now when I boot, I get GRUB and the option to boot Ubuntu or Windows 7. The only problem is that the USB keyboard (Aluminum or standard PC keyboard) doesn't work until an OS is loaded.
Is this an EFI problem? I'm starting to think that EFI is required for USB keyboard support at bootup since it replaces the BIOS functionality. Is this even remotely accurate? Did I mess things up by not going the rEFIt route? I'm not sure what I can do at this juncture as I can only boot into Ubuntu.
I could install OS X, rEFIt, then Windows and Ubuntu, keeping rEFIt as the boot loader, but if there's an easy solution I'd like to avoid that. More importantly, I'd like to understand what's going on.
I installed openSUSE on a 1tb HDD last night. I already have Windows Vista, and Ubuntu Maverick Meerkat (10.10) on my Laptop's 160gb Hard Drive. My computer was running fine beforehand, but after making a few miscalculations, whilke installing openSUSE i had deleted or overwritten GRUB, now I did what almost anyone that knows just a little about these things would do, and I reinstalled openSUSE, BUT this time i installed it on the 160gb hard drive with 17gb's of unallocated space that was in an "expanded partition" that was connected to Ubuntu and I got GRUB to work, but in the process i had made it so ubuntu was unable to boot or as it calls it an unbootable image, so since GRUB was working at this point I logged into windows, because openSUSE issn't supporting my wireless card, so anyway while i was on windows i downloaded the ubuntu 10.10 iso, and i installed it and it works, now i have eerything working, although it got rid of all my old ubuntu files, but i can live with that, BUT now my problem is i have to have my 1tb external HDD plugged in in order to boot up my computer, without it GRUB wont load, and so nothing else will load.
My question is: Is there a way to have a version of GRUB that will run on its own and not have to be installed alongside an OS (standalone GRUB) or a way that i can run GRUB off of my 160gb internal HDD and still have all 3 Operating system options (Windows Vista and openSUSE on the 160gbHDD, and ubuntu on the 1tb HDD) and have them all boot from that and (question 2 --->) also have it so that i dont require the 1tb Hard drive in to run GRUB?
I have a dualboot system with Ubuntu and Windows 7 (grub bootloader). I updated the firmware in my HD, and now grub doesn't work. After POST, instead of getting the menu of OS options, I get "Non-system disk: press any key."After pressing a key, I get the Windows 7 loader, with only a Windows 7 OS option. Windows 7 boots fine, but I have no way to boot into Ubuntu.
View 9 Replies View RelatedI recently installed ubuntu 9.10 32 bit using live cd onto a recently new Dell machine with windows7.
Everything was fine for a couple of weeks, but last night I got the error code...
Looking into the forums, I see that maybe I need to re-install grub 2. When I started probing using fdisk, I saw that the boot partition was my windows partition. So, I thought I would ask to find out if this looks right before I start making things worse code...
Is the "saved" option for grub2 not available after the new upgrade?I had grub2 setup to let me load either windows or ubuntu, whichever I last used, and it worked.After the last update to Ubuntu I cannot get this to work anymore. I can successfully change the default boot entry by entering a number, e.g. "GRUB_DEFAULT=3" but when I put in"GRUB_DEFAULT=saved" it always defaults to the first entry, the latest Ubuntu. I can also change the screenresolution for the grub menu on this computer, but on another computer I cannot change the screen resolution for grub or restore the 'saved' option (I have not tried to change the boot default by numbers on this other computer though). I am only editing /etc/default/grub and running update-grub, is there another script or file I should be changing as well since the update?
View 1 Replies View RelatedI am using fedora 14 on a Gigabyte GAX58-USB3 motherboard with a USB keyboard.The keyboard works during the PC's boot process (I can access the BIOS), it also works fine after Linux boots but it is ignored when grub is in control
View 4 Replies View Related
