Ubuntu Installation :: Grub Only Loads When Booting From SD Card / Fix This?
Jan 21, 2011
Ive installed Ubuntu 10.10 from a SD card (yes my laptop supports booting from SD) and it works fine except the grub does not load. Although I know there are many threads about this Im not sure which one to use because my problem is quite strange.
Im not pretending I understand how grub works but I find it strange:
When I boot from Hard Drive, it boots into Windows without loading grub (I installed ubuntu to an empty partition along the windows on the same drive), however, when I force booting from the SD card, I get the grub window with all the options as expected - ubuntu, mem check, windows 7. Now Im not sure if its grub loading from this SD card (containing ubuntu) or the card somehow runs the grub that is on the hard drive.
My guess is that the partition containg windows (sda0) is flagged as boot and thus the system doesnt even look after grub when booting, however, when theres the SD card it somehow forces booting the ubuntu partition (sda6).
Any idea what I should do? I can boot into Ubuntu, I can access grub etc. I just cant make it load without having the SD card in my PC
View 3 Replies
ADVERTISEMENT
Jun 19, 2010
I was installing fedora 13 just for fun and it move grub boot to different partition. Now I can't boot anything but fedora I know I need to be booting from hd0 sa1 but grub loads from hd0 sa7 .I just need my ubuntu os back .
View 2 Replies
View Related
Jun 28, 2010
i am newer to linux.i have a doubt in linux boot process in my machine RHEL5 has installed,in bootig GRUB will load in 3 steps
stage 1--> stage1.5 --->stage2
stage1
1st stage1 of grub is located in the 412 bytes of MBR)
also there is a file
/boot/grub/stage1 ( then what is this???)
stage1.5
( where does stage1.5 file located ? i found certain files in /boot/grub/)
like
e2fs_stage1_5
fat_stage1_5
ffs_stage1_5
code....
but my qusetn is GRUB loads from among these files??i removed the above mentioned files from /boot/grub ,but my system is still booting!!!!!!!!!!!!!!!!!!
how it is?then how stage1.5 and stage2 take place??
View 2 Replies
View Related
May 24, 2010
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies
View Related
Aug 9, 2010
The problem is I've set up a dual boot with Xp and Ubuntu 10.04. Ubuntu was working fine till 2 days back but now when I select Ubuntu from the grub screen i get a whole lot of numbers next which it'll say Usb drive or sd card reader etc.. these go by quickly and then the comp stops running. If i press enter on the keyboard I get Initramfs and then i can type but nothing happens even if I type reboot. if I press cntrl+alt+F2 then i get a blank screen with flashing cursor. Same with recovery mode. Windows boots fine. The grub2 screen comes fine. The last thing i did before this happened is reconfigure the grub2 screen, but it seems to be fine (i had added a background img and reordered the boot options) I did not edit grub.cfg. I would prefer not to reinstall it as iv done it a half a dozen times already in the last few weeks..
View 8 Replies
View Related
May 6, 2010
How do you change the order of the list? I have Xubuntu 9.10 installed on a 5 gig partition. I only use it for Skype as the mic does not work in 10.04 at the moment for me.Anyway, I would like 10.04 to default to the top of the list. How do I change the order when grub loads.
View 4 Replies
View Related
Jan 16, 2011
I'm getting a tad frustrated. Having gone down a dead end on this thread: [URL] I reloaded 10.10, wiping out previous install. Everything was working as it should. I then updated (today, Sept 16, 2011) When rebooted, the system went right to a grub prompt.
View 9 Replies
View Related
Jul 5, 2010
i just installed the Debian on my old laptop. The install went fine but after that, the GRUB menu loads and freezes. I simply can't do anything. I checked menu.lst and the timeout is set to 5 but still nothing happens. It won't load. I then tried to load with the "super GRUB disk"but the same problem - as soon as it loads from the CD, it freezes and I can't do anything. Before I had Xubuntu on the same laptop but there was no Grub menu. It simply loaded. There's only 1 OS on the laptop /currently Debian/ - no windows, no other Linux.
View 14 Replies
View Related
Jan 1, 2010
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
View 2 Replies
View Related
Jun 5, 2011
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies
View Related
May 10, 2011
When booting from the LiveCd it starts to load but never loads! All it does is flash a _ icon and then becomes black!
View 9 Replies
View Related
Mar 6, 2016
I have an odd issue -- fairly fresh Debian Testing install, using Lightdm.
After booting up, Lightdm starts, and then a moment or two later restarts. As a result, any keystrokes captured by the first run (e.g. the first few characters of my username) are lost. My lightdm log is:
Code: Select all[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.16.7, UID=0 PID=827
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf
[+0.00s] DEBUG: [SeatDefaults] is now called [Seat:*], please update this configuration
[Code] ....
This log shows me seeing the login screen, waiting for it to restart, and then logging in correctly on the first attempt.
View 0 Replies
View Related
May 27, 2009
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)Linux rpmL 2.6.27.24-170.2.68.fc10.86_64 #1 SMP Wed May 20 22:47:23 EDT 2009 x86_64 x86_64 x86_64 GNU/Linuxere my predicamenti got a HP pavilion laptop running that Nvidia graphics card, on that build. So it was a fresh FC10 install, but it would hang up, and only load if i hit the keypad/mouse, which it still does. Eventually it gets to the shell login screen. root login and i then did a yum update, which got me to the current build. that didnt work. NO x window still.
tried startx again, got me an error. found something that said add "vga=ask" to the grub loader, which still loads into shell, but when i do startx, it made me a xorg.conf.new, which i copied into /etc/X11 rebooted and tried again. still have to move the mouse or keypad for the load to start (no idea y) but it loads to shell, and startx works.
View 2 Replies
View Related
Jul 7, 2011
I have recently downloaded and installed Ubuntu 11.04 inside my copy of Windows. When I boot my laptop, I have the option to either boot in Windows or Ubuntu. When I boot in Ubuntu, I get the login screen all OK. But when the screen loads up, it is missing the top and left hand side navigation bars. It then appears to be trying to refresh itself (unsuccessfully) as after about 30 seconds the screen goes black and then the wallpaper image will come back, still without the navigation bars. This keeps on happening until I reboot the machine. The only way I can get the screen to reboot OK is to run the repair option on boot up.
I have notices that after the above has taken place and I have finally got the system to boot all OK by running the repair option, the system will not connect to my mobile broadband via the USB dongle. Not sure if they are related, but at this point they seem to be.
View 2 Replies
View Related
Jun 11, 2011
I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies
View Related
Oct 12, 2010
I've been using Ubuntu for more than a year (just basic simple stuff like surfing the net or the occasional document) and in the last months I've been running into the following problem.I've been updating regularly to the latest Kernels the last one should be 2.6.32-25. However at start up Grub loads only 2.6.31-19 and below and there's no mentioning of 2.6.32 in grub.cfg while it is present in menu.lst. I tried to update grub with no success.
View 9 Replies
View Related
Mar 1, 2010
So I am at my wits end trying to figure out why this won't work. I am trying to install ubuntu 9.10 on my netbook (I hear it runs better than remix) but an running into a wall. I am already using Jolicloud as my main os on my main partition. I have used Unetbootin to get the 9.10 iso on my re-movable media. I have gone into the bios and chose to have it look at the re-movable first, then my 1st partition on the HD. For some reason it never looks at the USB drive. I have disabled everything on boot except for the media and i get a screen that says "insert bootable media or restart" then i have to go back into bios and enable the HD again.
Side note, the media I am using might not be in fat 32 because I haven't figured out how to format in linux but, I have formatted in windows so that it is fat 32 and got the same problem.
View 6 Replies
View Related
Nov 12, 2010
Whenever I power on my Xubuntu machine, GRUB does not load until I reboot. Once the system is running, I can reboot back into Xubuntu but if I power down GRUB does not seem to load. I've got the system to power on at 8am every morning but the fact that I have to reboot it is really annoying me.
Update:
Reinstalled GRUB to the master boot record of my first hard disk and it solved everything. I had to follow the second part of this guide to get it to work:
http://ubuntuforums.org/showthread.php?t=224351
View 2 Replies
View Related
Feb 20, 2011
I've installed Ubuntu inside Windows 7 with the Ubuntu Windows installer. I have previously had problems with booting Ubuntu, but it always got to GRUB at least. Now it shows the Windows bootloader, I select Ubuntu and the computer just reboots.
View 4 Replies
View Related
Jan 17, 2010
OKI am loading 9.10 (K or U, makes no difference). This installs 2-6-31.14. Eventually I am unable to dissuade APT from upgrading to Grub 1.97 beta4. One of two things can happen.
1) I am upgraded to a later kernel at the same time (currently 2-6-31.1. This singularly fails to work, in that I end up with no working kernel at all and I can only run memtest (or Windows 7, which is about as much use): good for the soul no doubt, but frustrating. "Solution": tar up the whole of /boot beforehand and then reinstate it afterwards. I am back to square 1, but at least a working square 1.
2) I persuade APT not to upgrade the kernel.I then get 14 (and 14 recovery) in my grub.cfg, but boot fails dramatically, and it becomes apparent that it has forgotten about /dev/sda, my hard disk.Further investigation shows that I have a new initrd.img in /boot, which doesn't work properly; reinstate the backup version, and all is well.What is going on? Is it just me? How come there aren't crowds of protesting peasants with pitchforks outside Canonical Towers?
View 5 Replies
View Related
Oct 26, 2010
Both on a 10.04 and a newly installed 10.10:After BIOS post, I get no grub and just a blinking index in the upper left. I've left it for hours, never boots.How can I resolve this without getting any Grub boot options?
View 5 Replies
View Related
Dec 25, 2010
When I try to install Ubuntu OS everything works well to the last step. At last step it ask me for my user name while it is installing the OS at background. Then it says "ready" but nothing change. I can move mouse over the screen but there is nothing to push like "finish installation button" or something like that. I wait for 2 hours and nothing changed. There is no error code. Then I decide to reset Pc and try to see if it installed grub or not, but there is no grub at booting page. I started to OS installation again and same problem occur for 6 trials. I have intel i3 proccessor with graph card and gigabyte h57m-usb3 motherboard. OS: Ubuntu 10.10.
View 1 Replies
View Related
May 2, 2011
I have a laptop with a dead CD drive. I want to install Ubuntu 11.04 on it however it can not boot a USB drive. The current os is trashed, but grub is still okay. Is there any way to load the ubuntu CD's contents off of a flash drive and boot it from the grub console at boot?
View 2 Replies
View Related
Oct 24, 2009
I would like to install fedora onto a memory card 16Gb kingstone SDHC that I use in a ACER aspire one
I followed the instruction on the website and I found the following problem:
The wireless and Ethernet hardware where either not found or, if they were found, they did't work and there were no possibilities to make it work.
The strange thing is that almost every time after I attempted to boot form the memory when booting window as usual, the Ethernet hardware was not found anymore also under window!
View 2 Replies
View Related
Dec 22, 2010
I see the device in dmesg. On the macbook pro 6,1 it gets issued IRQ 19 and loads sata_sil24 and ata_piix correctly, however on the 5,1 and 5,2 macbook pro it only loads sata_sil24 and gets IRQ 24. Is there anyway to specify the IRQ assigned to the device via the kernel (is it an IRQ conflict or device not working on IRQ24)? MacBook Pro uses an EFI so not traditional bios where I can set irqs. Am I looking in the right direction as to the cause of my problem? Slackware 13.1 with standard linux kernel 2.6.35.8
View 1 Replies
View Related
Feb 3, 2010
i had a system running ubuntu karmic and grub2. Last day i installed fedora 12 on another partition and also installed the older version of grub that came along with it(because i was more used to it). The current status is:1. can boot into fedora, cannot boot into ubuntu.
2. can boot into fedora, chroot into the ubuntu partition
3. no data loss
However, i just can`t boot into ubuntu from the older version of grub which i have presently. Question is: How do i boot into karmic from the older version of grub? do take some time off and reply of you know the answer!
View 1 Replies
View Related
Feb 11, 2010
I will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
View 4 Replies
View Related
Jun 8, 2010
Had v9.x installed alongside Windows XP SP3 install. Have not used it that much since install.
Got the bug to upgrade to v10.
Went through the upgrade process, everything seemed fine.
At the end of the install process asked which dev to install GRUB onto - I selected only one drive, the wrong one of course, and the reboot failed.
Boots up with:
Have LiveCD running now to post. Ran Info_boot Script.sh - results below.
Will reinstalling v10 from Live CD fix this? Will this use Wubi or just go through normal install process? Or is there an easier fix to install GRUB on the correct drive to get the dual boot choice of Windows XP and Ubuntu back.
Naturally I need to get back to Windows ASAP - it's the net gateway and print server for my home/office setup.
Boot Info Summary:
View 9 Replies
View Related
Nov 21, 2010
My system set-up is one HDD that is partitioned having two Windows7 bootable partitions, and Ubuntu. I originally had Windows7 and Ubuntu, but I wanted to have another Windows7 OS to keep clean for gaming. Of course, when installing Windows7 it wiped out Grub2. I've reinstalled Grub2, but now I'm having a problem in that when I choose Windows7 in the Grub menu, it directs me to the windows boot manager to choose one of my Windows7 partitions to boot. I'd like to configure Grub so I can choose which Windows7 installation I'd like to boot from there. I've tried added custom scripts to point grub directly at the partition where each installation is located, but it always directs me to the windows boot manager. How can I bypass that?
View 2 Replies
View Related
May 3, 2011
I had Ubuntu 10 running on vmware machine. It ran fine. I upgraded to version 11, but now when the machine restarts I do not get any menu, I just get his:
GNU BRUB version 1.98-1ubunutu7
Minimal BASH-like line editing is supported.
grub>
And that is it! No menu, no list of options, nothing. If I type "ls" I get:
(hd0) (hd0,5) (hd0,1) (fd0)
I can enter "root (hd0,1)" which gives me:
(hd0,1): Filesystem is ext2.
Then typing "kernel /boot/vm" and pressing tab shows:
vmlinuz-2.6.32-27-generic vmcoreinfo-2.6.32-27-generic vmlinuz-2.6.35-28-generic vmcoreinfo-2.6.35-28-generic vmlinuz-2.6.38-8-generic vmlinuz-2.6.38-8-generic
There is no /boot/grub/menu.lst but there is /boot/grub/grub.cfg which seems fine as far as I can tell. Did I somehow end up with an older grub which is looking for menu.lst? I have other machines running Ubuntu and if I boot into them I seem to get a GRUB4DOS etc. slightly different version. The grub version shown above is 1.98 but I read somewhere Ubuntu uses version 2? Actually I found another post which suggests that this is the correct grub version for Ubuntu 11. How can I tell what menu file grub is looking for where it is looking and why its not finding or using it? It should work...
View 2 Replies
View Related
