I installed Windows 7 and then Ubuntu 10.10 64 bits. The Ubuntu installation went fine but when rebooting a "check disk" appeared and since then my PC keeps booting directly on Windows. I tried all the GRUB reinstallation methods of the GRUB2 Community Documentation with the live CD but none worked.
Below is the output of the Boot Info script found on several threads.
[Code]...
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
A friend of mine asked me to install ubuntu on his system as he finally got enough of all the flaws and problems in his vista. I said no problems ill have ubuntu up and running in no time! Well this is 2 days later and still nothing, he's computer refuses to boot from cd, i been changing the boot sequence allot but no indications of it wanting to boot the cd at all, whatever i try. So i made a bootable ubuntu usb-stick, doesnt work everytime i boot but sometimes... i get the load-up-screen, select install ubuntu, go ahead with the install, everything goes like clockwork. "restart is needed" sure, i restart it. grub says something like cant boot, or nothing to boot on hdd.. and thats that. ive reinstalled it several times (10+), trying ext2,ext3,ext4, partitioning it diffrently, ive tried it all. i even took out the scsi hdd, and tried an old ide-drive i had, gave me the exact same error..
i dont have all the specs but ill write what i know:
GA-ma78gm-s2h gigabyte motherboard
AMD Quad 3ghz
4 gb ddr
500 gb scsi
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language
configure the keyboard
detect and mount CD-rom
etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
There are several posts here about not being able to boot without the install disk, which is also my case. I imagine the solution for me should be easy, because I only have a single installed OS on this machine, which is a MacBook Pro 2.1. Here's the result of fdisk -l:
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[Code]...
Partition table entries are not in disk order sda4 is a partition that did not appear in the partition overview when I installed the operating system. I thought I'd look for help here while I continue to research the problem myself.
I had a 100% XP machine, installed 9.10 into a dual boot a while ago, and eventually upgraded to 10.4 LTS.
Current partitions
/dev/sda1 ntfs
/dev/sda2 extended
---- /dev/sda5 ext4
---- /dev/sda6 linux-swap
Currently, dual boot is working and both OSes are working as expected (although there's that bit of inconsistency with intel 845 graphics). I want to do two things in a major re-install: move Home to a new, separate partition, and do a clean 10.4 install while still retaining XP dual boot. If possible leave sda1 untouched, but that can be reinstalled if necessary.
Only things in Home that need to be moved are documents and mozilla seamonkey prefs and emails. Those items I can save and restore manually, so I have no problems with backup needed files, then clean install, then manually restore.
I know enough to be willing to try suggestions, but also know enough to recognize I can get into trouble. So that's why I'm asking here first.
I'm having serious troubles to install ubuntu-10.04.1. My raid is an hardware raid with intel chipset. Note that win7 is already installed and working with my raid. I made some space from windows, to install Ubuntu (40gb). First, I run the installer, everything seems to be fine. I choose to install Ubuntu were there is the most space free (sorry, I'm not sure about the real terms used there).
Then my partition with the vista loader appears. So the installer can see my raid, and should work fine (everything is detected correctly). But once I'm in the end of the installation (around 95%), a pop-up appears, and tells me that Grub can't install in /dev/sda and it's a fatal error. I can choose an another destination, but it doesn't seems to work.
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies View RelatedI've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI would like to recover my grub installation in a dual boot system. if there is an easy way to recover grub using flash disk? If yes is your suggestion opensuse developed? (currently running 11.3) . It would be nice also to have some gui just to make things easier. If not I assume that then the only option is the boot from dvd. Is that right?
View 9 Replies View RelatedI reformatted my root partition and boot partitions and installed ,averick but zhen I boot I get a grub 15 error. I might have made a mistake on the partitioning screen zhen I selected /dev/dsa6 for the GRUB bootloader - this is my dedicated /boot partition - and don't know how to fix it now
my current fstab is code...
By mounting all partitions one by one I can see now that everything has moved around so that
sda is the bigbastard drive - 500GB - that was sdb previously
sdb is supersize/basckup and was sdc before
the paritions on sda have moved to sdc
I have no idea hot to put everything back
I have install ubuntu and windows in the same computer in their own partition. I think that I have remove something while I was reinstalling some wireless stuff using synaptic. When I launch the computer I get the dual booting but only with memory test and windows. I have the ubuntu installation cd. What can I do to get back the dual booting with the facility to launch ubuntu.
View 1 Replies View RelatedScenario new-clean laptop computer "Hundyx W765TUN" with this test results:
Devices:
- Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz: well managed with Live-CD
- VGA NVIDIA G98M/GeForce-G105M: well managed with Live-CD
- CD/DVD Matshita UJ890AS: well managed with Live-CD
- Audio Intel ICH9/82801I: well managed with Live-CD
[Code]...
On every installation I've cleaned the MBR and made new partitioning at all for a single system. Tried to partition the disk manually and tried the "use entire disk" option with the automatic wizard. Same results on all cases, when the installation process goes well at all.
I've tried also to leave the computer some hours with the "GRUB Loading." message, but it doesn't move and remains with the same screen/text. Cursor remains blinking all the time under the GRUB message. In all cases Control+Alt+Del works to reboot. With hundreds of installations made, I've never found the same situation. It would be so strange to be a hardware issue.
I have an old HP PC with 2 drives: Primary (C = 20GB) and a slave (E = 60GB). I have Windows XP Pro OS (which I want to completely replace with Ubuntu). Ubuntu 10.10 is installed on E as a side-by-side (with XP on C). I am done testing Ubuntu and now want to completely replace the XP OS.Ubuntu is installed on E-drive as a partition. ISSUE: When I log on the PC goes directly to the GRUB menu but I get no option to boot from the Live Disk 10.10 during the boot-up.
HISTORY: I have tried (unsuccessfully) to remove Ubuntu from my E-drive by use of the uninstall function from Windows control panel. I have also tried to remove it using the manage/Disk Management process but the "Format" and "Delete" options are unavailable (grayed out) so cannot use that. I would like to do a complete clean up and fresh install of Ubuntu as my only OS.I have read and tried a number of internet articles / recommendations about opening BIOS and redirecting the start-up to the disk, but I do not get any option or any time during the boot to do that.
QUESTIONS:
1) How can I get my HP PC to boot from (recognize) the Ubuntu Live Disk (CD)?
2) Would a complete removal and clean reinstallation be a better approach?
3) And how can I remove Ubuntu from the partition on E (as I want to dedicate the C-drive exclusively for Ubuntu)?
This is my first post so please be patient. I am unfamiliar with this part of the installation process.
So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
View 7 Replies View RelatedAfter shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
When I first boot up. I get the GRUB command line. What happened to the boot menu? And I can boot up into my Windows partition just fine. But when I try the other partitions i get "Unknown file system" or when I try to boot into the other ntfs drive, I get "BOOTMBR missing", but yet it does not mean Windows, because i can boot that just fine. I can't find my Ubuntu partition. How can I get the GRUB boot menu back?
View 1 Replies View RelatedI have both 8.10 and 10.10 installed on my hard drive, but whenever I boot the GRUB (I believe it is GRUB Legacy not GRUB2) only shows 8.10. Is there any way to get it to see my newly-installed 10.10?
View 9 Replies View Relatedfew months back I did a clean install of 9.10 from 9.04 (wanted to clear room so decided against upgrade path) and since then I've been really struggling to boot into it. I've used Ubuntu since 7.04 and never had any issues with it - these issues have only started happening since my upgrade to 9.10. And I was hoping that 9.10 would be the release I could persuade her indoors to not boot into Windows XP!
Anyway my problem is that when I choose Ubuntu 9.10 from the boot list it gets to the point where the Ubuntu symbol is splashed up (with the brown background and the light shining on it) and then the little progress bar underneath freezes and the whole box freezes. It doesn't respond to any keypresses like the "magic" ones and I have mashed CTRL ALT F1 plus others keys repeatedly. Caps lock doesn't respond either so looks like completely frozen, though worth noting that the hard drive still sounds like it's spinning.
I've tried with every boot command under the sun (noapci, nosplash, quiet, noapic etc.) and none of them make any difference bar two - apci=noirq starts the desktop occasionally but with no windows manager, and irqpoll stops the freeze but it never loads the desktop or manager. Both these last two commands work about 1 in 10 boots or so but usually it freezes. I can also sometimes press Escape as soon as the Ubuntu symbol shows on screen and sometimes (about 1 in 5 tries) it gets into the desktop, but only if I hit it before it freezes up. The above does point to an IRQ issue but wondering what has changed since 8.10 and 9.04 which worked perfectly?
I've also booted into recovery mode and updated/fixed packages but the same thing happens with the recent 2.6.31-19 generic as well as -17, -14 etc. As per above I'm dual booting with Windows XP as the default boot option (wife's orders) but don't think this is related.
I was having some troubles installing windows 7 (install hang with no solution) and decided Ubuntu might be a decent route to install windows, or maybe I'd be satisfied and stay with Ubuntu. Downloaded the official version of 11.04 AMD64, burnt the iso to DVD using windows, and went through the installation process (Having already formatted the drive), only to find that once I removed the installation media, as prompted, I was greeted with a blinking cursor in the top left corner. There were no errors during the installation and I can boot using the liveCD no problem. I am installing this on a 2.8ghz i7 processor, 8GB of DDR3, and installing it on a 120GB SSD.
View 2 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
At first I thought it was a fluke, but it happed on another computer I was a bit late in updating. I'm running 10.04 lucid 32 bit on both computers.
After running the update, everything ran fine. The script ran update-grub and everything seemed ok. However when I rebooted, my laptop booted into GRUB and only showed windows and the recovory partition. Desktop would boot strait into windows with no selection (I knew how to fix it for the desktop since it happed a few days later)
When it first happend on my laptop, I scrounged around trying to repair the OS list, but nothing worked. Eventualy running "grub-install" with the "--root-directory" option on a live CD fixed it.
I'm not sure what is causing the problem, but I think I remember there being an update to GRUB when I ran the updater. The fix works, just a bit of a hassle, but I thought I would bring it to someone's attention in case it happens to them.
I updated from Ubuntu 9.10 to 10.04 via Ubuntu updater. Worked nicely. Until I had to use Win 7 for a moment, so I went to the Grub boot menu and picked Win 7. Nothing is happening. Just a black screen with blinking underscore to the top left corner. I never had this problem with 9.10, so I am confused. I tried looking around and nothing helped. Be noted that I am an amateur with Ubuntu coding and installing. I did hear that this is already a common issue now.
View 6 Replies View Relatedso excuse me if I don't use the correct terminology, but what I have are two USB external hard drives joined into one drive using LVM.I originally set this up using 11.2 and then used it for months on a system with 11.1. The LVM drive would show up in the file system as /dev/mapper/Media-Media.I then upgraded that system from 11.1 to 11.4 using a clean install and a "minimal server" selection. Now, the LVM doesn't show up anywhere. In the YaST disk partitioner, it shows a "/dev/Media" as being of the type LVM2 Media with no logical volumes
View 3 Replies View RelatedI tried to run Ubuntu 10.10 - Netbook and Ubuntu 10.4 live CDs on my ASUS 901.
Both run well.
But neither reboot after clean install.
After the machines BIOS splash screen there is just a blinking cursor at the left top of the screen. No ubuntu/linux/kernel messages whatsoever.
I tried installing both versions on both SSD-s (4GB & 32GB) and ensured the BIOS was correctly set to boot from the correct one.
I searched the net quite a lot but didn't find anything that could relate to an ASUS 901
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
My system has 2 hard drives, a 400gb master and a 250gb slave. sda (my main 400gb Windows drive) has XP on it. The slave (sdb) has 3 partitions:
sdb1 is for my downloads (NTFS ~180gb)
sdb2 has Kubuntu 8.10 installed (ext3, 60gb)
and sdb3 is the swap (3gb).
I want to do a destructive upgrade to Kubuntu 10.10 - I have the CD already and burnt. I know I have to select the partitions manually due to the complicated setup, I know I need to format the sdb2 partition to ext4, mount point /, and the swap can stay the same. On which hard drive should I install the bootloader? I can't remember where it is installed now, all I know is I had a lot of problems with the install.
I have Windows XP SP3 running on my Desktop PC and wish to dual boot it with Ubuntu 10.10. This isn't the issue as I can do this and it gives me the GRUB menu but selecting Windows XP won't do anything - or so it seems How long should it take to boot into Windows from the GRUB menu?
View 9 Replies View Related