Ubuntu Installation :: GRUB Freezes On A Clean Install With A Laptop?
Feb 6, 2010
Scenario new-clean laptop computer "Hundyx W765TUN" with this test results:
Devices:
- Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz: well managed with Live-CD
- VGA NVIDIA G98M/GeForce-G105M: well managed with Live-CD
- CD/DVD Matshita UJ890AS: well managed with Live-CD
- Audio Intel ICH9/82801I: well managed with Live-CD
[Code]...
On every installation I've cleaned the MBR and made new partitioning at all for a single system. Tried to partition the disk manually and tried the "use entire disk" option with the automatic wizard. Same results on all cases, when the installation process goes well at all.
I've tried also to leave the computer some hours with the "GRUB Loading." message, but it doesn't move and remains with the same screen/text. Cursor remains blinking all the time under the GRUB message. In all cases Control+Alt+Del works to reboot. With hundreds of installations made, I've never found the same situation. It would be so strange to be a hardware issue.
View 9 Replies
ADVERTISEMENT
May 2, 2010
I just did a clean install of Ubuntu 10.04, my PC was running 9.10 and 9.04 before, no problems. No problems on install (received some: end-request: i/o error, dev sr0, ....errors but as far as I know this doesn't mean anything but Cd Rom door open). When I started Ubuntu everything runs ok, (even audio that didn't worked on 9.04 ..finally)
After 1 or to minutes PC just freezed, everytime I restarted same thing. Tried using liveCD, id does crash anyway. I downloaded another ISO using bittorrent, installed, same result. When I open the Computer Monitor I see the System Memory scale up to 100%, then it alternates between processor 1 and 2, it goes to 100% then to about 9 and the other processor goes to 100 one at a time.
1.6 Mhz Intel
HHDD Samsung 160GB
View 8 Replies
View Related
Mar 17, 2010
I have a Dell Laptop C640 Latitude that locks up with in a min or two of booting up after I update from 09.04 to 09.10 or if I do a clean install of 04.10. I do not know if it is the laptop or the 09.10 that is doing it.
View 3 Replies
View Related
May 16, 2010
I have a problem with Thunderbird 3 on Ubuntu 10.04. When starting TB3 the 'mail account setup' box appears but can't type anything inthere... I can close the setup box... the main window is very unresponsive but cosing works also immediately. I fisrst did upgrade from 9.10 to 10.04 having the problem. Thinking the upgrade might have gone wrong I did a complete fresh install on that laptop, even verified the CD with md5sum before installing. After the fresh and clean install the problem remains the same.
The machine having the problem is a Toshiba laptop Tecra S1 with 1GB of RAM. I do not experience any other problem with Ubuntu 10.04 on that machine, everything else runs like a charm, there also was no error during installation... I think this problem is related to the Toshiba Tecra S1 laptop because other machines I own don't have problems with TB3.
View 6 Replies
View Related
Feb 24, 2010
A friend of mine asked me to install ubuntu on his system as he finally got enough of all the flaws and problems in his vista. I said no problems ill have ubuntu up and running in no time! Well this is 2 days later and still nothing, he's computer refuses to boot from cd, i been changing the boot sequence allot but no indications of it wanting to boot the cd at all, whatever i try. So i made a bootable ubuntu usb-stick, doesnt work everytime i boot but sometimes... i get the load-up-screen, select install ubuntu, go ahead with the install, everything goes like clockwork. "restart is needed" sure, i restart it. grub says something like cant boot, or nothing to boot on hdd.. and thats that. ive reinstalled it several times (10+), trying ext2,ext3,ext4, partitioning it diffrently, ive tried it all. i even took out the scsi hdd, and tried an old ide-drive i had, gave me the exact same error..
i dont have all the specs but ill write what i know:
GA-ma78gm-s2h gigabyte motherboard
AMD Quad 3ghz
4 gb ddr
500 gb scsi
View 3 Replies
View Related
Dec 11, 2010
I reformatted my root partition and boot partitions and installed ,averick but zhen I boot I get a grub 15 error. I might have made a mistake on the partitioning screen zhen I selected /dev/dsa6 for the GRUB bootloader - this is my dedicated /boot partition - and don't know how to fix it now
my current fstab is code...
By mounting all partitions one by one I can see now that everything has moved around so that
sda is the bigbastard drive - 500GB - that was sdb previously
sdb is supersize/basckup and was sdc before
the paritions on sda have moved to sdc
I have no idea hot to put everything back
View 9 Replies
View Related
Feb 14, 2010
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language
configure the keyboard
detect and mount CD-rom
etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
View 3 Replies
View Related
Mar 21, 2011
I installed Windows 7 and then Ubuntu 10.10 64 bits. The Ubuntu installation went fine but when rebooting a "check disk" appeared and since then my PC keeps booting directly on Windows. I tried all the GRUB reinstallation methods of the GRUB2 Community Documentation with the live CD but none worked.
Below is the output of the Boot Info script found on several threads.
[Code]...
View 9 Replies
View Related
Apr 18, 2011
I have an old HP PC with 2 drives: Primary (C = 20GB) and a slave (E = 60GB). I have Windows XP Pro OS (which I want to completely replace with Ubuntu). Ubuntu 10.10 is installed on E as a side-by-side (with XP on C). I am done testing Ubuntu and now want to completely replace the XP OS.Ubuntu is installed on E-drive as a partition. ISSUE: When I log on the PC goes directly to the GRUB menu but I get no option to boot from the Live Disk 10.10 during the boot-up.
HISTORY: I have tried (unsuccessfully) to remove Ubuntu from my E-drive by use of the uninstall function from Windows control panel. I have also tried to remove it using the manage/Disk Management process but the "Format" and "Delete" options are unavailable (grayed out) so cannot use that. I would like to do a complete clean up and fresh install of Ubuntu as my only OS.I have read and tried a number of internet articles / recommendations about opening BIOS and redirecting the start-up to the disk, but I do not get any option or any time during the boot to do that.
QUESTIONS:
1) How can I get my HP PC to boot from (recognize) the Ubuntu Live Disk (CD)?
2) Would a complete removal and clean reinstallation be a better approach?
3) And how can I remove Ubuntu from the partition on E (as I want to dedicate the C-drive exclusively for Ubuntu)?
This is my first post so please be patient. I am unfamiliar with this part of the installation process.
View 3 Replies
View Related
May 22, 2010
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
View 9 Replies
View Related
Oct 20, 2010
After 8 years of using Mac, which I do enjoy, I decided to jump into the open source community. So I bought a brand new Thinkpad SL510 and installed Ubuntu 10.10 (32 bit) using the entire disk, thus erasing Windows.
The installation process was very easy and the system generally works great. It's fast and I love the interface.
Just encountered one annoying issue which I don't think I should be confronted with, using a freshly installed Unix-based OS: a few times, the system entirely froze. I couldn't move the mouse pointer anymore, the keyboard no longer responded (eg. when hitting Shift Lock the light didn't come on). Waited for several minutes but nothing happened at all. So I had to turn off the computer by pressing and holding the power button.
This has only happened a few times so far, but a few times too many. When it happened, I only had Firefox open, or Firefox and Twinkle. The last time it happened, the screen colours gradually went gray before everything came to a halt.
View 2 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
May 7, 2010
I upgraded from 9.10 to 10.04 and during the upgrade it asked to install a new version of grub or keep the current one. Thinking that I should just upgrade the grub just to make sure that I had the latest version I decided to do it. So I told it the partitions to use the ubuntu, ubuntu swap, vista, and vista recovery.Finished the upgrade and restarted.I tried to boot into both the vista, and vista recovery but I noticed something weird. Grub switched the names, the actual vista install is called recovery, and when you tried to load it, a blinking cursor would appear for a split second and then loop back to grub. If you tried to select the vista recovery now called vista it would just sit at the blinking cursor for infinity. But booting into ubuntu worked.
So I decided to wipe ubuntu and do a fresh install of 10.04. Went through and set up the swap and ext4 partitions at the end of the hard drive(because I would like to expand the windows directory should I ever be able to boot into it). Now when I start up and select vista recovery now called vista it sits at the blinking cursor just as before.
View 3 Replies
View Related
Jan 7, 2010
After I updated my system, grub shows about 2 extra options on the boot menu. They seem to be different kernel versions. How do I clean up the menu and uninstall the older kernel versions?
View 6 Replies
View Related
Apr 10, 2011
11.4 has been a bit of a pain. The broadcom driver, b44, for the Broadcom 44xx/47xx, freezes my system. I cannot be the only victim of this faulty driver.
The driver is not for the WLAN, but rather for 10/100 ethernet on a Dell Insprion 1720 laptop.
View 2 Replies
View Related
Feb 21, 2011
I'm trying to create a portable flash-drive from the openSUSE-11.3-KDE-LiveCD-x86_64.iso-file. I can boot and run it, but everytime I use Yast to install something (language, ...) everything but the mouse just freezes, forcing me to restart the laptop.
View 9 Replies
View Related
May 6, 2011
I have installed Ubuntu10.04.1LTS in my Desktop amd64 computer. I also downloaded the same version for i386 processors and tried to install the OS for my HCL Pentium Dual Core T4300 @2.1Ghz 4GB RAM laptop, details of which are given in the following two screenshots: dscf0105.jpg and dscf0106.jpg I already have Debian Lenny 5.0.4 installed on the laptop dscf0104.jpg and the laptop works fine when I run the Debian OS or Knoppix liveCD image stored in the HDD of the laptop. We all know that the Ubuntu LTS live CD leads to the following option: Screenshot.jpg However, in my laptop the operation freezes before we can reach the above option. The screenshot explains the situation: dscf0107.jpg I know I could always use one of the alternate downloads and install the OS from it. But my point of contention is: where is the matter going wrong? Can't we use the graphical installer CD to do a CUI installation?
View 8 Replies
View Related
Aug 11, 2011
I have a Lenovo Thinkpad T520 laptop with Nvidia NVS 4200m Graphics card. I installed Ubuntu 11.04.
Before I installed Ubuntu 11.04 I had went to my bios and disabled Nvidia Optiums and changed the graphics to Discrete Graphics. Then inserted my Ubuntu 11.04 CD and installed.
With this I had gotten unity to work. However when I pull the power cable from the laptop my screen freezes. Also if press "FN"+ Home or END to change the brightness of the screen my screen freezes and no longer able to move the mouse or press anything on keyboard.
Did anyone ever run into this problem and or fix this issue? I can get the graphics working properly with Ubuntu 11.04 with Unity with a Nvidia NVS 4200m graphics card.
View 2 Replies
View Related
Oct 11, 2010
I configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies
View Related
Jan 4, 2010
I have an odd issue that someone has hopefully seen before or can provide a next step. Firstly, I installed Ubuntu 9.04 about 7 months ago and things ran fine. I then did an upgrade (via apt-get) to the 9.10 kernel: Current: Linux 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
Still, I had a properly functioning system. I then decided to install selinux since I was interested in learning how to set it up and get familiar with it's security features. When I was installing it, it got stuck on the portion where it had to modify Grub. It got stuck in a similar point as the following:
[Code]...
View 2 Replies
View Related
May 14, 2010
IBM ThinkPad X61
Windows Vista Home
Wubi Ubuntu Karmic
I tried to upgrade to Lucid Linx while in Karmic Koala but the installation process froze while doing something with "memtest86+". CTRL-C got it to unfreeze and finish the installation but on a restart when I chose the Ubuntu OS it kept restarting rather than booting. I decided to start fresh.
So I booted into Vista and uninstalled Wubi Karmic Koala and proceeded to do a fresh install of Wubi Lucid Lynx. The installation, including the reboot, went smoothly. However, when the Update Manager was installing software a new screen popped up saying this:
Window Content:
[Title:] Debconf on Ubuntu
[Message:] Configuring grub-pc
[Checkbox:] Continue without installing Grub? (unchecked)
[Help button: explains consequences of not installing grub]
[Back button] (greyed out)
[Forward button]
So I leave the checkbox unchecked and click on forward. Nothing happens. All the Update Manager windows remain the same and nothing changes when I hit the Forward button. The "Applying Changes" window is stuck at "Setting up grub-pc (1.98-1ubuntu6) ...".
Can I safely force quit the Update Manager installation? Why am I getting that message about Grub? I didn't choose anything like that.
View 8 Replies
View Related
Jan 15, 2010
So I installed SUSE 11.1 a few weeks back with two SATA drives andit's been working great. I recently received another SATA drive and wanted to add the space to my /home directory. I installed the drive and then booted up my computer. It goes through BIOS and POST just fine but when I get to GRUB my computer just hangs there. It doesn't throw any errors, it just sits until I hard reboot it. If I disconnect the extra SATA drive and then try to boot again everything starts successfully. I've done a little bit of searchingbut couldn't find much on this problem.pretty new to linux so I could definitely be missing something. Let me know if more details are needed.
View 9 Replies
View Related
Feb 8, 2011
I have a PC with a 120GB HDD which is clean and formatted.I have commenced install of 10.10 from CD. It starts fine and I run through to the who are you window. I have filled in all the details but the "FORWARD" button is grayed out. Also, the progress bar eventually stops altogether. Is the system hanging, or is the install just slow?
View 5 Replies
View Related
Jun 15, 2011
So I've been trying to install 11.04 x64 on the same drive as Windows 7. The install seemed to go fine until it tried to install grub over the Windows 7 bootloader. My first try at this, I just told it to try again, and it seemed to install fine. It then rebooted and came up with the grub bootloader as expected. However, when it attempted to boot into 11.04, it gives me an error that says "unknown filesystem". It does however boot into Windows 7 fine. While I was writing this up, I went into my BIOS to make sure that my SSD was set to be the primary boot drive and it was not. Changed the SSD to primary boot priority and away it went.
For some reason, with the my other hard drive as the primary boot drive, it wouldn't boot to Ubuntu, but would behave just fine when going into Windows. Very strange behavior. I rebooted the computer again to make sure that the boot priorities fixed the problem and the default background came up halfway, like a corrupted .jpg file, so I forced a shutdown. Now I'm back to what I started with. I've been rebooting to see if I can reproduce the good startup, but to no avail. Also, when grub is loaded, it either gives me a purple or black background. Is this normal? It seems to alternate randomly.
TL;DR
I get one of three errors when trying to boot into 11.04 from a clean install next to a fresh Windows 7 install.
"error: unknown filesystem"
"error: hd1 out of disk"
"error: you need to load the kernel first"
I also see a kernel panic every now and again.
I've got a bootable flash drive with 11.04 on it and that's what I've been trying to install from. I've been looking more into this issue, and from what I've uncovered in the forums is that the new grub bootloader that comes with Natty has some issues. I found the procedure for a downgrade of grub to the Maverick version, but I have not come across a 64-bit procedure. This downgrade has worked from what I've read so far.
View 7 Replies
View Related
Jul 5, 2010
i just installed the Debian on my old laptop. The install went fine but after that, the GRUB menu loads and freezes. I simply can't do anything. I checked menu.lst and the timeout is set to 5 but still nothing happens. It won't load. I then tried to load with the "super GRUB disk"but the same problem - as soon as it loads from the CD, it freezes and I can't do anything. Before I had Xubuntu on the same laptop but there was no Grub menu. It simply loaded. There's only 1 OS on the laptop /currently Debian/ - no windows, no other Linux.
View 14 Replies
View Related
Jan 7, 2010
I made an upgrade from Kubuntu 9.04 to 9.10 and this upgrade generated a series of permission problems.
Considering that I have an individual /home partition, I am planning to make a clean install of Karmic (9.10) on a laptop with a 230GB hard disk and 2GB RAM.
The actual hard disk is mounted the following way:
In total there are some 230GB of Hard Disk available.
The fat 32 partition was not a good idea, because I can't access it from the file manager, so I will dump this partition on my next installation.
Now my question: What partitions would you recommend to mount and what size would you give to each partition?
View 4 Replies
View Related
Feb 8, 2010
few months back I did a clean install of 9.10 from 9.04 (wanted to clear room so decided against upgrade path) and since then I've been really struggling to boot into it. I've used Ubuntu since 7.04 and never had any issues with it - these issues have only started happening since my upgrade to 9.10. And I was hoping that 9.10 would be the release I could persuade her indoors to not boot into Windows XP!
Anyway my problem is that when I choose Ubuntu 9.10 from the boot list it gets to the point where the Ubuntu symbol is splashed up (with the brown background and the light shining on it) and then the little progress bar underneath freezes and the whole box freezes. It doesn't respond to any keypresses like the "magic" ones and I have mashed CTRL ALT F1 plus others keys repeatedly. Caps lock doesn't respond either so looks like completely frozen, though worth noting that the hard drive still sounds like it's spinning.
I've tried with every boot command under the sun (noapci, nosplash, quiet, noapic etc.) and none of them make any difference bar two - apci=noirq starts the desktop occasionally but with no windows manager, and irqpoll stops the freeze but it never loads the desktop or manager. Both these last two commands work about 1 in 10 boots or so but usually it freezes. I can also sometimes press Escape as soon as the Ubuntu symbol shows on screen and sometimes (about 1 in 5 tries) it gets into the desktop, but only if I hit it before it freezes up. The above does point to an IRQ issue but wondering what has changed since 8.10 and 9.04 which worked perfectly?
I've also booted into recovery mode and updated/fixed packages but the same thing happens with the recent 2.6.31-19 generic as well as -17, -14 etc. As per above I'm dual booting with Windows XP as the default boot option (wife's orders) but don't think this is related.
View 9 Replies
View Related
Mar 18, 2010
I had 8.4 hardy heron and I've been upgrading from within up to the most recent upgrade to 9.10.Was it better to do a clean install from the cd
View 1 Replies
View Related
Mar 19, 2010
I'm a relatively new user of Linux, I use Kubuntu 9.10, and I would like to know whether I need to make a clean install for upgrading to 10.4 (I know, stable isn't ready yet, but I'm impatient , and I want to prepare in advance) or I could do it in some way without losing everything I have installed? Or maybe it would be better to only upgrade to the newest version of KDE (I'm using 4.3.2 now)? Which one is easier and/or better? How is it done (Note: using KDE)?
View 3 Replies
View Related
Jun 23, 2011
I was having some troubles installing windows 7 (install hang with no solution) and decided Ubuntu might be a decent route to install windows, or maybe I'd be satisfied and stay with Ubuntu. Downloaded the official version of 11.04 AMD64, burnt the iso to DVD using windows, and went through the installation process (Having already formatted the drive), only to find that once I removed the installation media, as prompted, I was greeted with a blinking cursor in the top left corner. There were no errors during the installation and I can boot using the liveCD no problem. I am installing this on a 2.8ghz i7 processor, 8GB of DDR3, and installing it on a 120GB SSD.
View 2 Replies
View Related
