Ubuntu Installation :: Grub Error 15 On Clean Install / Fix It?
Dec 11, 2010
I reformatted my root partition and boot partitions and installed ,averick but zhen I boot I get a grub 15 error. I might have made a mistake on the partitioning screen zhen I selected /dev/dsa6 for the GRUB bootloader - this is my dedicated /boot partition - and don't know how to fix it now
my current fstab is code...
By mounting all partitions one by one I can see now that everything has moved around so that
sda is the bigbastard drive - 500GB - that was sdb previously
sdb is supersize/basckup and was sdc before
the paritions on sda have moved to sdc
I have no idea hot to put everything back
View 9 Replies
ADVERTISEMENT
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Feb 24, 2010
A friend of mine asked me to install ubuntu on his system as he finally got enough of all the flaws and problems in his vista. I said no problems ill have ubuntu up and running in no time! Well this is 2 days later and still nothing, he's computer refuses to boot from cd, i been changing the boot sequence allot but no indications of it wanting to boot the cd at all, whatever i try. So i made a bootable ubuntu usb-stick, doesnt work everytime i boot but sometimes... i get the load-up-screen, select install ubuntu, go ahead with the install, everything goes like clockwork. "restart is needed" sure, i restart it. grub says something like cant boot, or nothing to boot on hdd.. and thats that. ive reinstalled it several times (10+), trying ext2,ext3,ext4, partitioning it diffrently, ive tried it all. i even took out the scsi hdd, and tried an old ide-drive i had, gave me the exact same error..
i dont have all the specs but ill write what i know:
GA-ma78gm-s2h gigabyte motherboard
AMD Quad 3ghz
4 gb ddr
500 gb scsi
View 3 Replies
View Related
Feb 6, 2010
Scenario new-clean laptop computer "Hundyx W765TUN" with this test results:
Devices:
- Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz: well managed with Live-CD
- VGA NVIDIA G98M/GeForce-G105M: well managed with Live-CD
- CD/DVD Matshita UJ890AS: well managed with Live-CD
- Audio Intel ICH9/82801I: well managed with Live-CD
[Code]...
On every installation I've cleaned the MBR and made new partitioning at all for a single system. Tried to partition the disk manually and tried the "use entire disk" option with the automatic wizard. Same results on all cases, when the installation process goes well at all.
I've tried also to leave the computer some hours with the "GRUB Loading." message, but it doesn't move and remains with the same screen/text. Cursor remains blinking all the time under the GRUB message. In all cases Control+Alt+Del works to reboot. With hundreds of installations made, I've never found the same situation. It would be so strange to be a hardware issue.
View 9 Replies
View Related
Feb 14, 2010
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language
configure the keyboard
detect and mount CD-rom
etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
View 3 Replies
View Related
Mar 21, 2011
I installed Windows 7 and then Ubuntu 10.10 64 bits. The Ubuntu installation went fine but when rebooting a "check disk" appeared and since then my PC keeps booting directly on Windows. I tried all the GRUB reinstallation methods of the GRUB2 Community Documentation with the live CD but none worked.
Below is the output of the Boot Info script found on several threads.
[Code]...
View 9 Replies
View Related
Apr 18, 2011
I have an old HP PC with 2 drives: Primary (C = 20GB) and a slave (E = 60GB). I have Windows XP Pro OS (which I want to completely replace with Ubuntu). Ubuntu 10.10 is installed on E as a side-by-side (with XP on C). I am done testing Ubuntu and now want to completely replace the XP OS.Ubuntu is installed on E-drive as a partition. ISSUE: When I log on the PC goes directly to the GRUB menu but I get no option to boot from the Live Disk 10.10 during the boot-up.
HISTORY: I have tried (unsuccessfully) to remove Ubuntu from my E-drive by use of the uninstall function from Windows control panel. I have also tried to remove it using the manage/Disk Management process but the "Format" and "Delete" options are unavailable (grayed out) so cannot use that. I would like to do a complete clean up and fresh install of Ubuntu as my only OS.I have read and tried a number of internet articles / recommendations about opening BIOS and redirecting the start-up to the disk, but I do not get any option or any time during the boot to do that.
QUESTIONS:
1) How can I get my HP PC to boot from (recognize) the Ubuntu Live Disk (CD)?
2) Would a complete removal and clean reinstallation be a better approach?
3) And how can I remove Ubuntu from the partition on E (as I want to dedicate the C-drive exclusively for Ubuntu)?
This is my first post so please be patient. I am unfamiliar with this part of the installation process.
View 3 Replies
View Related
Aug 5, 2010
I'm trying to update Ubuntu 10.04 after a clean installation, it downloaded 245 files,and there is an error in the indexes of the 2 last packages:Failed to fetch [URL] difiere (bad size) Failed to fetch [URL] difiere (bad size) This happens even changing the repository to main server or another through "Software origins".Update-manager doesn't conclude the update because it can't download all the packages.
View 1 Replies
View Related
May 7, 2010
I upgraded from 9.10 to 10.04 and during the upgrade it asked to install a new version of grub or keep the current one. Thinking that I should just upgrade the grub just to make sure that I had the latest version I decided to do it. So I told it the partitions to use the ubuntu, ubuntu swap, vista, and vista recovery.Finished the upgrade and restarted.I tried to boot into both the vista, and vista recovery but I noticed something weird. Grub switched the names, the actual vista install is called recovery, and when you tried to load it, a blinking cursor would appear for a split second and then loop back to grub. If you tried to select the vista recovery now called vista it would just sit at the blinking cursor for infinity. But booting into ubuntu worked.
So I decided to wipe ubuntu and do a fresh install of 10.04. Went through and set up the swap and ext4 partitions at the end of the hard drive(because I would like to expand the windows directory should I ever be able to boot into it). Now when I start up and select vista recovery now called vista it sits at the blinking cursor just as before.
View 3 Replies
View Related
Jan 7, 2010
After I updated my system, grub shows about 2 extra options on the boot menu. They seem to be different kernel versions. How do I clean up the menu and uninstall the older kernel versions?
View 6 Replies
View Related
Jan 3, 2011
I decided to bite the bullet and upgrade to the 10.4 LTS from 8.10. Did a complete fresh install and chose to automatically clean off the drive and install the new system from scratch.I have three hard drives with the system on the smaller 40GB and the other two drives are 500GB and 2TB.
From what I can tell my problem probably stems from having the older Grub 0.97 on the system on another drive, but I can't seem to figure out how to purge it. When I mount the partitions, there is no /boot folder... The following is the output from the Boot Info Script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
[code]....
View 8 Replies
View Related
Jan 8, 2010
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Jan 27, 2010
I have an odd problem. I custom-built a workstation:
MSI Speedster 1 mobo
2x Opteron 2352
4x DDR2 ECC 4GB
3x 150GB WD Raptor, hardware RAID 0
1x 2TB WD Green, standalone
I had Linux Mint 8 installed, but before putting the machine to real use decided to toss Windows 7 on there to see how it worked. Now I am attempting to put Mint 8 back on to get everything set up. There have been no hardware changes since I had Mint installed before.
I can successfully install, but when I reboot I get a Grub error 17. The partition table looks like:
50GB / ext4
400GB /home ext4
...
2TB /backup /ext3
Grub is installed to (hd0), which is the 450GB hardware RAID. It does not make a difference when I run the installation (and then reboot) with the 2TB drive disconnected. Thinking maybe the new ext4 format was messing with Grub, I tried:
200MB /boot ext2
50GB / ext4
400GB /home ext4
And installed again and rebooted. No dice. I'd guess Grub has issues recognizing the hardware raid, except it worked before
View 1 Replies
View Related
Jan 27, 2010
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code:
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
[Code]....
View 5 Replies
View Related
Oct 15, 2010
Made a mistake while installing btusp for macbook. I know now that I shouldn't have deleted the installed files, I should have run "apt-get remove", but it's too late. Now whenever I install software or updates I get an annoying message about the btusb packages:Error! Cannot locate /usr/src/btusb-0.0.1.dkms.tar.gz.
File does not exist.
dpkg: error processing btusb-dkms (--configure):
subprocess installed post-installation script returned error exit status 2
No apport report written because MaxReports is reached already
Setting up oggconvert (0.3.3-1ubuntu1) ...
Errors were encountered while processing:
btusb-dkms
Setting up btusb-dkms (0.0.1) ...
Loading new btusb-0.0.1 DKMS files...
Error! Cannot locate /usr/src/btusb-0.0.1.dkms.tar.gz.
File does not exist.
dpkg: error processing btusb-dkms (--configure):
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
I'd like to clean up apt/dpkg so that it doesn't think the package whose files I've deleted is still installed. when I run
dpkg -l "btusb*"
I get this output:
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
code....
View 3 Replies
View Related
Oct 11, 2010
I configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies
View Related
Apr 22, 2011
Ok so I just installed Ubuntu 10.10 Server Edition. On the very first boot, everything seems to run perfectly. I can SSH into it from any remote computer with no problems. However, the installation of certain things calls for a system reboot, which 2 days ago never would have been a problem. But now for some reason, the SSH server only wants to work on the very first boot of a clean install. After I reboot it, I get the ssh: connect to host 192.168.0.180 port 22: No route to host error. The absurd part is sshd is running! I've even tried restarting sshd, restarting the server, and using both 64 and 32 bit installs. The only way I can get anything to connect to it is by using ssh localhost. It won't even let me connect using the IP on the local machine!
View 1 Replies
View Related
Oct 13, 2010
Tried installing Linux (Red Hat 5) along with Windows 7. I created a new partition (10 GB in size) and used it for the Linux installation. After install, I was getting GRUB geom error and my system wasn't booting.
After a few tries I had to format my entire hard disk and run fixmbr which came up with the following warning message: A new MBR will be created and some of the partition may become inaccessible
Now, even though I have gotten back Windows, the Linux partition is not at all visible. (Seems like the warning message has become a reality as that partition looks like has become inaccessible.)
My new hard disk capacity has also reduced by 10 GB and it is not showing up using any software.
How can I recover that inaccessible partition?
I tried fdisk via Linux Rescue disk. Got an error 22, the details as follows:
No luck booting in Windows.
View 2 Replies
View Related
Feb 19, 2010
I made an xubuntu disk.loaded it and rewrote my hardrive.on a pretty old averatec laptop. 3/4 of the install it gives a a io error and stops the install.I tried to reinstall from the screen again but got the same error.So I rebooted and it skips everything and goes straight to a grub loading stage 1.5, grub loading error 17. It even skips the live cd.I also tried to do it thru a usb stick but that gets ignored too.
View 3 Replies
View Related
Dec 4, 2010
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies
View Related
Mar 27, 2010
I'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
View 1 Replies
View Related
Oct 2, 2010
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
View 4 Replies
View Related
Jul 13, 2011
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
View 3 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Feb 8, 2011
I have a PC with a 120GB HDD which is clean and formatted.I have commenced install of 10.10 from CD. It starts fine and I run through to the who are you window. I have filled in all the details but the "FORWARD" button is grayed out. Also, the progress bar eventually stops altogether. Is the system hanging, or is the install just slow?
View 5 Replies
View Related
Jun 15, 2011
So I've been trying to install 11.04 x64 on the same drive as Windows 7. The install seemed to go fine until it tried to install grub over the Windows 7 bootloader. My first try at this, I just told it to try again, and it seemed to install fine. It then rebooted and came up with the grub bootloader as expected. However, when it attempted to boot into 11.04, it gives me an error that says "unknown filesystem". It does however boot into Windows 7 fine. While I was writing this up, I went into my BIOS to make sure that my SSD was set to be the primary boot drive and it was not. Changed the SSD to primary boot priority and away it went.
For some reason, with the my other hard drive as the primary boot drive, it wouldn't boot to Ubuntu, but would behave just fine when going into Windows. Very strange behavior. I rebooted the computer again to make sure that the boot priorities fixed the problem and the default background came up halfway, like a corrupted .jpg file, so I forced a shutdown. Now I'm back to what I started with. I've been rebooting to see if I can reproduce the good startup, but to no avail. Also, when grub is loaded, it either gives me a purple or black background. Is this normal? It seems to alternate randomly.
TL;DR
I get one of three errors when trying to boot into 11.04 from a clean install next to a fresh Windows 7 install.
"error: unknown filesystem"
"error: hd1 out of disk"
"error: you need to load the kernel first"
I also see a kernel panic every now and again.
I've got a bootable flash drive with 11.04 on it and that's what I've been trying to install from. I've been looking more into this issue, and from what I've uncovered in the forums is that the new grub bootloader that comes with Natty has some issues. I found the procedure for a downgrade of grub to the Maverick version, but I have not come across a 64-bit procedure. This downgrade has worked from what I've read so far.
View 7 Replies
View Related
Jan 7, 2010
I made an upgrade from Kubuntu 9.04 to 9.10 and this upgrade generated a series of permission problems.
Considering that I have an individual /home partition, I am planning to make a clean install of Karmic (9.10) on a laptop with a 230GB hard disk and 2GB RAM.
The actual hard disk is mounted the following way:
In total there are some 230GB of Hard Disk available.
The fat 32 partition was not a good idea, because I can't access it from the file manager, so I will dump this partition on my next installation.
Now my question: What partitions would you recommend to mount and what size would you give to each partition?
View 4 Replies
View Related
Feb 8, 2010
few months back I did a clean install of 9.10 from 9.04 (wanted to clear room so decided against upgrade path) and since then I've been really struggling to boot into it. I've used Ubuntu since 7.04 and never had any issues with it - these issues have only started happening since my upgrade to 9.10. And I was hoping that 9.10 would be the release I could persuade her indoors to not boot into Windows XP!
Anyway my problem is that when I choose Ubuntu 9.10 from the boot list it gets to the point where the Ubuntu symbol is splashed up (with the brown background and the light shining on it) and then the little progress bar underneath freezes and the whole box freezes. It doesn't respond to any keypresses like the "magic" ones and I have mashed CTRL ALT F1 plus others keys repeatedly. Caps lock doesn't respond either so looks like completely frozen, though worth noting that the hard drive still sounds like it's spinning.
I've tried with every boot command under the sun (noapci, nosplash, quiet, noapic etc.) and none of them make any difference bar two - apci=noirq starts the desktop occasionally but with no windows manager, and irqpoll stops the freeze but it never loads the desktop or manager. Both these last two commands work about 1 in 10 boots or so but usually it freezes. I can also sometimes press Escape as soon as the Ubuntu symbol shows on screen and sometimes (about 1 in 5 tries) it gets into the desktop, but only if I hit it before it freezes up. The above does point to an IRQ issue but wondering what has changed since 8.10 and 9.04 which worked perfectly?
I've also booted into recovery mode and updated/fixed packages but the same thing happens with the recent 2.6.31-19 generic as well as -17, -14 etc. As per above I'm dual booting with Windows XP as the default boot option (wife's orders) but don't think this is related.
View 9 Replies
View Related
Mar 18, 2010
I had 8.4 hardy heron and I've been upgrading from within up to the most recent upgrade to 9.10.Was it better to do a clean install from the cd
View 1 Replies
View Related
