OpenSUSE Install :: LVM Drive Not Showing Up In Clean 11.4 Install?
Jun 11, 2011
so excuse me if I don't use the correct terminology, but what I have are two USB external hard drives joined into one drive using LVM.I originally set this up using 11.2 and then used it for months on a system with 11.1. The LVM drive would show up in the file system as /dev/mapper/Media-Media.I then upgraded that system from 11.1 to 11.4 using a clean install and a "minimal server" selection. Now, the LVM doesn't show up anywhere. In the YaST disk partitioner, it shows a "/dev/Media" as being of the type LVM2 Media with no logical volumes
View 3 Replies
ADVERTISEMENT
Oct 24, 2010
There are several posts here about not being able to boot without the install disk, which is also my case. I imagine the solution for me should be easy, because I only have a single installed OS on this machine, which is a MacBook Pro 2.1. Here's the result of fdisk -l:
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[Code]...
Partition table entries are not in disk order sda4 is a partition that did not appear in the partition overview when I installed the operating system. I thought I'd look for help here while I continue to research the problem myself.
View 4 Replies
View Related
Mar 21, 2011
I installed Windows 7 and then Ubuntu 10.10 64 bits. The Ubuntu installation went fine but when rebooting a "check disk" appeared and since then my PC keeps booting directly on Windows. I tried all the GRUB reinstallation methods of the GRUB2 Community Documentation with the live CD but none worked.
Below is the output of the Boot Info script found on several threads.
[Code]...
View 9 Replies
View Related
Oct 11, 2010
I configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Nov 13, 2009
Did a clean install with 11.2 after being very impressed with the LiveCD. After installation process finished, laptop booted up and I had a green screen, no icons and a mouse cursor. REALLY liked the way the OS performed on the LIVECD and would like to give it a real shot.I can install Fedora 11, Ubuntu, Madriva and Mint Linux with no problem on the same Toshiba laptop.
View 9 Replies
View Related
May 18, 2011
I just switched back to openSUSE from Fedora linux. I made a clean install of openSUSE 11.4, but had trouble when installing the boot loader. For whatever reason the auto-partition tool hadn't given me a /boot partition even though the GRUB configuration referenced it. So I switched the / partition to /boot and the /home to / and now I don't have a /home partition. Is this why my system won't boot past the splash screen in "normal" mode, but boots fine in "failsafe"?
View 3 Replies
View Related
Jan 21, 2010
I was trying to upgrade to 11.2 from 11.1 by upgrading the OS online. However my internet connection failed and the upgrade has now messed up my system. I have a dual-boot system with Windows XP and I'm wondering if it would be OK in getting the DVD and selecting update? Or do I have to change the boot log etc?
View 6 Replies
View Related
Jun 6, 2010
Okay I did a clean network install on 11.2 on my test machine.Old gateway box but it had min requirements. It will load completely into failsafe mode but will not complete a normal boot option.The default Green background images comes up and the cursor comes up, but I let it sit for 30 minutes and nothing. I did a hard reboot, still hung on cursor and green back ground. Booted again but this time choose failsafe, boot up completely. Am I doing something wrong? I have installed many many version of Linux in the past never had a problem like.
View 9 Replies
View Related
May 13, 2011
I am completely new to OpenSuse and just installed it. However, I wanted things encrypted for work and chose LVM2 with password encryption upon installation.However, I didn't change any of the values.Now I see that my home partition is only about 30 Go and I cannot mount the oter 300GB that sit on another partition. When I try to mount it through nautilus I have to enter my password and then get :Unable to mount 307 GB LVM2 Physical Volume
View 9 Replies
View Related
Aug 27, 2010
I just gave my friend my laptop which has II on it. She wants W7 (have the disk) but how do I reformat my drive in order to do a clean install?
View 3 Replies
View Related
Jan 25, 2011
How to do a clean install onto a newly formatted drive
View 3 Replies
View Related
Dec 16, 2009
I did try to do an update from 11.1, but that killed the thing dead, no x, no kde, just a command line log in.So clean install, leave /home alone and we seem to be firing on all cylinders, except.Hopeless networkmanager still will not connect, it hasn't in any version of K4, truly, from my point of view, an embarrassment as the default network connector. But, trying to re-install WICD I have run into a snag.When I click on one click in Webpin, it asked if it should install it, Oh yes please, asks for the su password and. opens konqueror with the background description of the RPM. But will not install. I tried downloading the RPM and it gives me a bit of a list of dependency problems. None of which I can seem to resolve through the usual repos.Also in the 11.2 install I have been defaulted to the "desktop" kernel, when I used to have a PAE, should I change the kernel to PAE?
View 1 Replies
View Related
May 18, 2010
The hardware is a psystar box with 2 drives for os x and ubuntu respectively. I attempted install of ubuntu over older version of xubunut without physically disconnecting the os x drive After install I could not boot into either system. THEN I remembered something about the install problem that 10.4 has and installed ubuntu again, this time following the instruction regarding booloader install. Now I can boot ubunut fine, but of course when I select drive holing os x it hangs on 'Verifying DMI pool data....' I've been looking at some thread on here about dual boot problems with Win7 and such, but are any of the recommended diagnostic and repair steps relevant to my case, specifically testdisk and bootinfo scripts?
View 1 Replies
View Related
Apr 15, 2011
I have recently done clean installs of 11.4 on two computers and then done clean re-installs but still have the same problem. Each time, the install was without flaw and I could download the updates, when offered, in the install process. At the end of the install I can log into KDE and everything works. However, after shutting down, on reboot, I only get a command line login. I can either login and run startx or use su and do init 3 followed by init 5. This tells me I am getting to runlevel 5 but X isn't starting. Either of those approaches gives me the KDE login. However, after that I have to manually start the network in YAST. I also think I had had to restart CUPS but I have only got as far as installing a printer once so I can't be absolutely sure that happened. As I indicate, this is fully reproducible. Anyone give me a clue as to what is going on?
View 9 Replies
View Related
Jan 31, 2010
What is the best way to try and clean up orphaned files in openSUSE 11.2 gnome? My understanding is there is not a zypper command for this.
View 9 Replies
View Related
Aug 11, 2010
Upon boot up, I get lots of new lines added to log files in /var/log concerning apparent problems during boot up. The boot sequence does attempt to show the failure or success during each step as it transitions to the final run level, but is there a good manual or procedure on how to fix each transition, so as to cut down on the amount of pesky warning or error messages?
I am a bit concerned that running a system with warning messages is a bit like running a car low on oil. In the past the goal was to have a perfectly running linux system that came up all the way, and yes, I have seen such. This meant knowing how kernel things work, etc, but still, I would think we would want to pay attention to such things as
[ 1127.997470] ALSA usbaudio.c:1274: 2:1:1: cannot get freq at ep 0x1
[ 894.166132] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
and others and work to bring them to a minimum.
Right now I am working on things piecemeal as I go along, and it will take a lot of time.
I didn't dump the 10K's of log files into this message forum, in case someone asks to see the details, but I am just striving to have the system come up clean, and not with a message like:
Warning: Skipped 98 probes
(whatever that means?? did the kernel just mean that it knew that it is supposed to check 98 things but failed? or that 98 things should have gotten checked but didn't?)
View 3 Replies
View Related
Nov 24, 2010
I can't login due to my file-system being full. I found the main area with the large usage. Var/log is taking 99.5% of my var folder. On a full file-system scan Var/log is taking up 85% of disk use. File-system capacity is 36 gig. Temp is cleared after each boot.
What can I do to clean up any unnecessary files. I can only boot in safe mode and have limited navigation skills. To get scan results I booted a live-disc.
Opensuse 11.2 gnome 64 bit.
View 9 Replies
View Related
Oct 31, 2010
When I installed banshee 1.6.1 from the default repository it worked fine. But I wanted the newest version (1.8.0) for its new features and so I've tried both adding their (openSUSE 11.3) repository and doing it through yast and also installing it (for openSUSE 11.3) straight from their website with the "1-click install". Both of these methods did the exact same thing, just the latter added the repository for me (much simpler/lazier). Now, after installing banshee 1.8.0, it does not show up in the application launcher menu. So, I'm not sure how to open it and/or add it to the kickoff menu.
View 1 Replies
View Related
Mar 29, 2010
I need to install GRUB on my USB-drive. I've gone through variety of manuals and articles but I have strange errors during install.
1) Insert USB in my laptop.
2) My OpenSUSE automatically mount an USB-drive, so I unmount it
Code: umount /media/disk-1
3) Format USB-drive into ext3
[Code].....
View 3 Replies
View Related
Jun 18, 2010
I have two different laptops that I would like to make bootable flash drive installs for, but would then like to have at least /home on a common removable storage (either a big flash drive or USB or ethernet hard drive) to share between the two laptops (I'll only be using one laptop as a Linux box at a time). One laptop (Dell Latitude D410) is only 32 bit capable (Pentium M - I think there's a 64 bit Core 2 CPU available for the socket 479, but I don't know if the BIOS / mobo will support it). If I'm going back and forth between 32 and 64 bits, can I share /home? What else can I share - /usr or anything else?
View 1 Replies
View Related
May 13, 2010
I initially installed OpenSuse on my Laptops internal drive (clean formatted) and everything worked fine. Later I took out laptop's hard drive and put it into a USB enclosure to use as an external drive.
View 1 Replies
View Related
Oct 19, 2010
I've pretty much installed Ubuntu Linux9.10, 10.04 and Debian 5 on external hard drives before, however, I just want to avoid certain pitfalls that may occur with openSUSE11.3. Has anyone successfully done this before? And, is it similar like Debian and Ubuntu installs in that you have to install the OS using an advanced option and specifying /dev/sdb, etc? Right now, I have Ubuntu installed on an external harddrive along with Debian as well and wanted to do the same for openSUSE11.3 and was wondering if all Unix derivatives share similar installation processes. I would just like to keep things as I have it currently where the system does not boot with Grub, and instead I have to go to the bios and specify which physical drive to boot from in order to change the boot order.
View 9 Replies
View Related
Feb 2, 2011
I have a DELL D420 without optical drive and i want to install opensuse 11.3 on it, also i don't have an external Optical drive. I want to know if it's possible to install OpenSuse 11.3 from a Flash drive or Amovible disk, and how to proceed to do that.
PS: is it a good idea to install Opensuse on dell d420: C2D ulv 1.2, 1gb ram, 60 HD ? it it'll work well.
View 3 Replies
View Related
Nov 26, 2008
I just installed OpenSuSE 11 and after it was done installing and i rebooted, Windows doesn't show up on the boot screen I only get the default OpenSuSE and Fail Safe options.
All i know is that vista is on sda3 when i partitioned my drive. Here is my menu.lst entry for windows:
###Don't change this comment - YaST2 identifier: Original name: windows###
title windows
rootnoverify (hd0,8)
chainloader (hd0,0)+1
View 9 Replies
View Related
Sep 14, 2010
11.3 ; looking to play with DNS; nothing of the kind is showing in Yast networking menus. Checked, and BIND shows as installed. Also, while I'm crying for help: cant see the windows box next to me; can ping it, and could browse to it with File Manager yesterday, but not working today ! Also; I tried KDE desktop (like new things) but it's driving me nuts (menus too small, I lose the choices as I move through submenus) and I'd like to go to Gnome ; how to ?
View 1 Replies
View Related
Dec 31, 2009
I have a Chrome OS .iso that I can booting from CD but only in text mode [the computer has issues] and I want to live install it to the hard drive, but all I have is the linux prompt. Is there a command to do that? I tried install, but I still don't know what to do.[I'm fine with a complete install overwriting everything]
View 5 Replies
View Related
Mar 30, 2010
I have a couple of USB pen drives, they are 8 and 16 gigs.I want to set one up to run as a �Live KDE� drive and put the �install DVD� in the other.Where would I find directions to do this?
View 2 Replies
View Related
Apr 25, 2010
Is it possible to install Linux on an external SATA drive?I have a system dual booting between OpenSuse and Windows XP. I wanted to see what other distros were like so I tried installing Ubuntu to my external SATA drive. After installing, I got an error from GRUB, and I had to recover my MBR.I tried the same thing with Mandriva, and got the same result. Finally, I tried another install of OpenSuse 11.2. The result was that I get a grub error 21. The only result of my efforts to try other distros is a lot of experience recovering my MBR.
View 9 Replies
View Related
Mar 22, 2011
Old hp notebook (HP520) and want to install some linux distro on it to use it for basic web browsing and word processing. After a bit of research decided to begin with opensuse.
Only problem i cant seem to install it on the notebook. The dvd drive is dead and hence i wanted to install suse through a usb drive (2GB). Downloaded the appropriate live CD and used it to make a bootable usb disk as per instructions on opensuse.org. The drive boots up fine but no matter what i do i the next screen is always a black screen with a blinking underscore and nothing seems to happen. However compatibility reports indicate that suse should install hassle free and everything should work!
Already attempted text mode and safe settings installations. Nothing has worked so far. XP seems to run perfectly fine on it.
Here's the cpu-z report for the laptop if that's any help: report.txt
View 9 Replies
View Related
