Ubuntu Installation :: GRUB Is Not Displayed And MS Windows Is Runing Immediately After First Screen
Dec 29, 2010
I am trying to install ubuntu in a machine in which XP was already installed.The GRUB is not displayed and MS Windows is runing immediately after first screen.I installed these drives' mount points
/ as primary
/boot logical
/home logical
I would like to not waste time with experiments, and different tutorials are not clear and coherent about primary , logical and mounting points.
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
I'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
Got Ubuntu 10.10 amd64 installed.. I've been using Fedora 13 64bit for some time now dual boot with WinXP.. Ubuntu installation to a free Hard drive went well till i rebooted, my Fedora installation was gone , and i thought Ubuntu is much installer friendly than fedora.
I'm a fairly new linux user and I seem to have a problem with ubuntu 8.10 after installing it.To make sure everything was working fine before i could do a dual installation, i ran the live cd and it worked like a charm.Everything works fine in the live cd....the internet, sound, graphic drivers (even the special effects seemed to be work fine)I thought wow...after having a bitter experience with Ubuntu 8.04 and 7.10 (I couldnt install those at all coz of driver issues and stuff) I thought this is it!So I used the wubi installer to install ubuntu in my D drive (I didnt wanna use C just to be safe as the primary OS is installed there). Gave it a healthy space of 15 gb. Finished the installation and the rebooted.I went inside Ubuntu which started doing its installation and copying of files and stuff. So far so good.....
And then once it finished its installation and copying of files (100 %), the screen went blank and i see a cursor blinking. I thought maybe its restarting and thats why it must be doing this.I wait for nearly 10 mins and nothings happening except for the cursor blinking on the black screen. I press the caps lock key to see if anything is processing. Nope. So i manually shut it down and then load ubuntu.It loads like 20-30%....rests for a while....and then it loads a bit (not completley)....after that it takes me to a command line asking me for my password and username.I enter those correctly. But it doesnt get me into the main GUI screen yet.
It shows me a lot of the this error msg: -bash: /dev/null:Permission denied
I'm still in command line (or terminal to be precise). So i use 'startx' (something which i learned from my csci labs ) to start a new session. It showed signs of starting a new session (i can see the mouse pointer and stuff) and then poof....back to the command line again.So I shut it down and load it again in recovery mode. It shows signs of the same symptoms in the splash screen (going very slow after 20-30 % ) and then this time, before i'm asked for my username and password in the command line, it shows a lot of warnings: fake daemon running (or something like that) and i cant even use startx!So i didnt know what to do, uninstalled ubuntu and did a fresh installation (wubi and in the same D drive). Reboot. Install and copy files 100% and then a blank screen again with the dreaded cursor blinking. I still wait for about 10 mins and nothing yet happens. So I manually shut it down (again) and then load ubuntu and unsurprisingly i have the same problem as what i described before....doesnt load properly and i'm not able to come out of the terminal.
i upgraded to ubuntu 9.10 from 9.04 today .but after upgrading so many errors crept in . and these are following .. 1. Original login screen of ubuntu 9.10 is not being displayed. 2.By mistake i removed volume control and network connection applet from upper pannel.so can any one tell me how to re organise the pannel...and get back those two applets or can any one tell me how to completely recover the upper pannel.
When I attempt to install the OS on my PC, the install software crashes immediately after I select US-English on the first screen. I'm copying the entire error report below. My system is configured as follows: Gigabyte P35-DS3R motherboard with 4G RAM. (FYI, I'm using the 32-bit LiveCD just because I may need a 32-bit OS for some purposes. I know this means I may not be able to use all of my RAM.) There are 3 500G hard drives connected to the computer. /dev/sda and /dev/sdb are RAID-1 mirrors via the on-motherboard ICH9R RAID chip. The logical partitions show up as /dev/dm-1, /dev/dm-2, /dev/dm-3, /dev/dm-4, and /dev/dm-5. When I type `fdisk -l`, I can see sda, sdb, and dm-* all separately. (I can provide the full output of `fdisk` if anybody wants to see it.)
/dev/sdc is a standalone drive without RAID.
I want to install Fedora on /dev/dm-2 with swap on /dev/dm-5. Currently, /dev/dm-1 and /dev/sdc2 each contain a separate installation of WinXP. I suspect the problem is with detecting RAID, thus I have deleted most of the error report that doesn't seem to concern storage detection.
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment. Here is my Boot Info Script: .....
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
10.04 was working fine till one day I boot up, and there's a weird grey screen. I hear login sound, but nothing is displayed on the screen, it just goes grey with weird shapes and sometimes color stripes. Sort of like grey screen of death...
I thought I would recover my nvidia drivers, but I get the same grey screen when booting from Live CD also. Even from ubuntu recovery remix. Ubuntu Live CD launches, I get a menu, but when it starts to boot, grey screen again.
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
I am having problems with hibernation. When I choose to hibernate, the computer starts to do so, and powers off, and almost immediately it wakes up and comes back to the locked screen. I am using 32 bit version. Hibernate used to work properly on Hardy. I checked that my swap space is more than twice my RAM size.
I run into a new kind of problem with Ubuntu 10.4 LTS. The unlock screen dialog that asks for your password when resuming from the screensaver does not show up immediately. Moving the mouse, typing stuff. It does not seem to be a pure display problem, since typing the password does not seem to do the trick. After a while (about 15 seconds), it shows up, though.
I have a dual boot setup with two hard drives. Windows 7 is running on my primary drive with Ubuntu 10.04 on the secondary drive. I installed GRUB 2 to the secondary hard drive, and I'm booting from that. Everything seems to be working well with one problem. Every time I shut down from Ubuntu and tell it to load Windows (it doesn't matter if it's a reboot or power off/on), Windows locks up during its boot. If I power the laptop off and back on, I can select and load into Windows just fine. It just takes two attempts EVERY time.
I've used Mint a couple times to try to recover my old computers, but I only worked with it as long as I needed to. Now, I'm going to give Ubuntu a try so I downloaded Ubuntu 10.10 x64 and burned it to a DVD. When I try to boot it up with the DVD in, it does the startup screen that I'm used to before it loads the actual OS, and then it just gives me a blank screen. The only way to exit is to shut down the computer
I installed openSUSE 11.2 on my Compaq 2170US laptop. When I select it from the grub menu, everything acts normally until the login screen, which freezes immediately (i.e. before I can select my user account or type in my password).I installed from the full openSUSE DVD and chose the GNOME desktop. Before installing, I took openSUSE for a test drive with the GNOME LiveCD and everything seemed to work fine.
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
I locked the screen, came back, typed the password, screen remained black, though cursor was visible and moving. Nothing I could do to rejuvenate the screen. Had to switch to tty6, sudo shutdown -r now. Then, on reboot obtained kernel selection, it proceeded to displaying kernel messages, but froze on sdb, after 3 secs. I figured it was the usb, so turned off, removed usb cables to external hard drives, but again it froze saying something about firewire mouse, the mouse is also usb. I tried several times, but no matter what kernel I chose, I couldn't get it to boot. So I loaded puppy live cd, but now it can't access some parts of the disk. I was running utorrent and the folder with partially downloaded files can be accessed but there's nothing there (there was), and some folders can't be accessed at all.
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
i'm not able to play music at all. videos videos seem to crash my browser and using either rhythmbox or banshee they crash too.i ran rhythmbox by typing sudo rhythmbox and tried to play a file and it displayed a pop-up window saying that my autioaudiosink element is missing and the terminal displayed this:
code: (rhythmbox:8415): rhythmbox-warning **: unable to grab media player keys: could not get owner of name 'org.gnome.settingsdaemon': no such name warning: unhandled message: interface=org.freedesktop.dbus.introspectable, path=/, member=introspect
What happens is that the sound will disappear, either without any apparent reason, otherwise when I move the mouse, or pause vlc, or open up another application, in most cases FF. I have also seen the mouse flash while vlc is in fullscreen, and immediately afterward the sound is gone. When the sound disappears, the gnome-volume-control will disappear and reappear on the top taskbar. Also there will be no device under the hardware and input tab of the sound preferences when the sound disappears.
Killing and restarting the pulseaudio daemon from the cli will return the appropriate choices under sound preferences hardware/input tabs, as well as the audio. This could happen a couple of times in the period of an hour. Usually restarting vlc will solve the problem, or restarting the pulseaudio daemon. Another thing I have noticed is that I will occassionally have to kill the vlc process through the system monitor or cli, as closing vlc will not remove it from the taskbar. I have tried the fix shown here, to no avail. Using kernel 2.6.30.9-96.fc11.x86_64 on a hp dv3-2154ca.
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
Iam facing a weird problem with ubuntu since last week... Starting system-->selecting ubuntu from grub menu-->ubuntu splash screen comes and it loads fully-->black screen is displayed instead of login window.. Restarting the system and the prob is gone..able to login properly..
This problem is ocurring randomly..sometimes i can login in 1st attempt properly,other times i have to restart the system twice or even thrice to get to the login screen.. what can be the possible reason to this...I have not done any updates also..
I'm using Ubuntu 10.04. When I get to the login screen, I am given a choice of the usernames available on the computer.
What I want is a simple username field to fill in, so other users of this computer won't know what user name accounts on the machine. Unfortunately, the only other option I can see is for automatic login - the last thing I want!
In the past, when I logged into Ubuntu the username foield was left blank. How can I achieve the same in 10.04?
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
