Ubuntu Installation :: Fails To Run From USB HDD
Oct 17, 2010
I downloaded 10.04 32bit and the USB installer and installed it on a USB HDD it workes perfectly on my laptop. I tried the same USB drive on my main Desktop computer (intel i7 930, Gigabyte GA-X58A-UD3R MB) I select Boot to USB and get the Ubunto loading screen, but it never loads. I have tried downloading the latest 10.10 and loader in both 32 bit & 64 bit with exactly the same results. Anyone with an idea? If I do get this working how can I get programs or changes I make to Ubunto when running from the USB to remain as part of the way it runs everytime I boot.
View 9 Replies
ADVERTISEMENT
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
Jan 9, 2011
I recently decided to install ubuntu netbook remix 10.10 to my Toshiba NB200. I was using windows and I wanted to completely erase them. I burned the USB, I followed every single instruction the site had, and even though the installation seemed to work, and a message to reboot my computer appeared at the end, the installation finally fails. When I reboot, the only thing I get is a black screen with an underscore at the top left corner. I tried the installation four to six times and even tried older versions as well but all I get is the black screen.
View 9 Replies
View Related
Jun 24, 2010
I'm trying to install ubuntu on a laptop (Acer Aspire 6530), and duel boot with windows vista. However, when starting up the computer with the CD in the drive, the installer fails to load, showing only a picture at the bottom of the screen showing a square and a circle with a person in it... This persists for as long as I have cared to wait (hours) and pressing keys at first results in nothing, then after sufficient key presses just produces beeps...
Anyone know what's wrong there?
View 5 Replies
View Related
Mar 13, 2011
10.10 installation fails: not paritition nor hard drive visible, Gparted does not start: trying to install 10.10 as a 2nd boot to windows Xp MCE installation. I get the the stage "allocate drive space", but there is not device nor hard drive visible. if I click install now I get an error message, no root file system defined. please correct this from the partitiioning menu.If I sart GPARtition, it does not start.I am totally lost, I have two parititions on hard drive that i created with fresh XP MCE installation, one dedicated to XP, other I reserverd for Ubuntu. Neither one is viisible at the installation.
View 1 Replies
View Related
May 7, 2010
I was trying to install Ubuntu 10.04 (desktop) on my old PC. But it keeps stopping after I selected keyboard(never leaves this screen).
What can I do? The PC is able to run XP, but I hoped that I could speed up things a bit by using Ubuntu.
View 3 Replies
View Related
Aug 15, 2010
I have installed Debian maybe 30 times over the years since about 2003, stable, testing and Sid on two different desktops and two different laptops. The only problem I have ever had is sometimes with a flaky daily build. It is one of my favorite distros.
BUT, I am totally frustrated is trying to install to a USB. I have followed the manual step by step about 6 times in the past two weeks. The result is always the same. The installation fails to find an installation iso image. Yes, I know the iso image and the hd-media vmlinuz and initrd.gz files are supposed to be the same version.
File: debian-testing-i386-netinst.iso from: [url]
Files: vmlinuz and initrd.gz from: [url]
The USB boots to a Language selection screen and proceeds through the Keyboard selection screen with no problems.
The next step which searches for an installation iso image fails.
Skipping that step and trying to load installer components from iso image also fails.
Searching the entire PC for an installation iso image also fails. (I even copied the netinst iso image to the HD root directory.)
View 6 Replies
View Related
Jun 1, 2010
I just tried to install with Ubuntu 10.04 AMD64 Alternate on RAID1 and Encryption but after reboot the screen just stays black.
my system is a AMD Athlon 64 X2 Dual Core 4200+ on a Abit AN-M2HD Motherboard, and 2 HDs each 250.1 GB
i split the HD into
* 50GB for /
* 200GB for /home
* 1GB for swap
all get a RAID1
/home is encrypted with passphrase (Twofish 256, cbc-essiv:sha256)
swap is encrypted with random (Blowfish 128, cbc-essiv:sha256)
where can i check RAID and hardware compatibility?
View 9 Replies
View Related
Sep 19, 2010
I had a problem with the install of Ubuntu 10.04 and 10.04.1 on a Dell Precision T3500. I used the 32bit live CD. I let the installer create the file systems and use the whole disc. The disc is was created as shown below. After the install button was pressed, the root file system was created and then the swap. When the installer went to mount the swap it complained there was not enough memory and failed the installation. I installed Ubuntu by manually making the swap file system smaller using gparted and assigning the / and swap to the file systems created by gparted.
Disk /dev/sda: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]...
View 4 Replies
View Related
Mar 29, 2011
I installed Ubuntu 10.10 amd64 (and tried 10.04.2 as well) from Wubi under Windows 7 64-bit. When I reboot after installing it through Windows, I go to Ubuntu and the installation completes. Then it reboots again to finish the install of the OS. When I boot into Ubuntu now, grub does not appear. Instead, some initramfs stuff comes up in a console with no GUI and says some error stuff about root devices. I read that grub updates cause problems, but the installation never finished and therefore I was never able to go into Ubuntu to lock grub packages, etc. I've run into this error on multiple fresh installs.
View 1 Replies
View Related
May 24, 2011
Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
View 1 Replies
View Related
Mar 3, 2010
Any ideas as to why ubuntu netbook remix would fail to boot after installing? I've tried twice installing it via usb on a dell netbook. Installation completes just fine but screen just flashes over and over as if in a reboot loop. I was able to run the OS via the USB stick just fine even with persistence but the flippin thing wont boot.
View 1 Replies
View Related
May 10, 2010
I am trying to install 10.04 with wubi and I encounter a strange error:
At first, everything runs normally. Then I am asked to reboot the system.
After rebooting, Ubuntu starts with a GUI (desktop background, my USB-Mouse is working) and a Window appears ("completing installation" and some advertisement).
A dialog tells me, that the systems tries to set the time (probably from an NTP Server). This is shown with a completion bar, starting at 571% and going up to 800% in several steps. Then it says: "Installation des Grundsystems".
Next steps: creating ext4 file system, copying files ... Again, a progression bar appears, going up to 28%.
Then, an error message appears: "Datei entspricht nicht ihrer Quelle auf der CD/DVD" (file does not match the source on CD/DVD).
It gives me a filename(e.g. /target/usr/lib/smbcquotas) and the choice to Abort/Retry/Skip. I click on "Retry" ("Skip" has exactly the same effekt).
The progress bar goes up to 38%, and I can hear that files are copied. Then the system hangs, showing the desktop wallpaper, mouse functioning. I can only turn it off.
I can try this procedure several times. I even used different disks (one brand new). It always comes to the same end. The only thing that changes are the file names ut gives me. I think that the error message is misleading. Probably there is another error behind the scenes.
View 2 Replies
View Related
Jul 30, 2011
Installing to encrypted LVM on hardware RAID array.
When it asks where to install GRUB, it defaults to /dev/mapper
I have tried /dev/mapper, /dev/boot, /dev/sda1, /boot.
raid array with:
I am not sure what to put there.
View 9 Replies
View Related
May 10, 2013
I have downloaded the Wheezy DVD 1 and started the istallation process. The installation time is strangely very short in respect to the Squeeze release, anyway
The GRUB installation step fails. I terminated the installation without a bootloader and rebooted from DVD with the rescue boot option.
Now I asked for a console to try to manually install the bootloader but the following command:
# grub-install /dev/sda1
[where sda1 is my root partition]
gets the following message:
/bin/sh: grub-install: not found
What can I do?
View 14 Replies
View Related
Apr 30, 2011
I downloaded the 64bit net installer. I install just the standard, reboot and the machine hard locks on me. It appears to be locking up on Bluetooth.
View 2 Replies
View Related
Nov 28, 2010
I have been using ubuntu 10.10 32 bit. I thought of giving 64 bit a try. I downloaded the ubuntu-10.10-desktop-amd64 from the ubuntu website and burned it in to a cd. Then i boot from cd. But unfortuntely i am getting terminal instead of installtion or try options. It says : General errormounting filesystem" and then Lots of " Authentication failure". I typed startx in the terminal but i didnt get any gui.
I am using hp dv6 laptop with windows 7 preinstalled. Core i5 processer, nvidia g105m graphics card and 4gb ram. Ubuntu 10.10 32 bit works fine.
I don't know the whether the problem is because of my graphics card. But it works fine for me in 32 bit. The driver i am using is of version 260.19..06. I really want to use 64 bit OS.
View 2 Replies
View Related
Jun 10, 2009
I'm attempting to install F11 on my desktop. I am unable to complete the installation because the X environment for anaconda fails to start and instead the installation reverts to text mode (in which I cannot seem to to a custom disk partitioning layout for the installation, which I have to be able to do). This was not a problem with the Alpha or Beta, but the preview and now the final release have both had this problem.
My system:
intel 3.16 core 2 duo
4gb ddr2 ram
dual nvidia 9800gtx+
output of lspci:
Code:
View 4 Replies
View Related
May 1, 2010
I installed 10.04 on two P-III's. Both experience the same video issue. I click on the maximize or minimize window buttons, and the video goes too dark to see. I can just barely make out what's on the screen. depending on where I move the cursor, it gets a little lighter or darker. These are both fresh installs without errors (with Visual Effects set to default of NONE). Machine specs Dell Dimension 4100 (1ghz/512m/40+80g) and Dell l933r (933mhz/512m/30+80g), uncertain about graphics cards but they're old and probably in the range of 32m or so of graphics ram. Both machines ran various Ubuntu releases from 6.06 to 9.04 without problems. 1. Any known fix to this problem? 2. Has anyone else tried 10.04 on P-III's 3. Should I just concede that I should run older Ubuntu releases on these boxes?
View 3 Replies
View Related
Aug 9, 2010
I'd iso from Ubuntu website last week; burned to CD at 16x and verified. Tried installing as only OS onto used 17GB HDD in old 933MHz HP box w/ 2x256MB RAM; failed. Other tries (all failed at same 49% place): changed HDD to used 10GB; burned CD at 8x (slowest my burner will run) and verified data after burning; started CD in HP's burner drive instead of CD ROM drive; "downgraded" to 17" Dell CRT monitor (from 15" Sony flat panel). Both burned CDs will run in live mode.
View 1 Replies
View Related
Aug 24, 2010
I am trying to install 10.04 on a Dell XPS Gen 4 machine with Raid 0. I have 2 WD 74GB drives with a 128k stripe.
The install appears to be working great - then suddenly hangs trying to install Grub with the following error:
Unable to install Grub in /dev/sda. Executing 'grub-install /dev/sda' failed.
This is a fatal error.
I have tried choosing different partitions without any luck at all.
View 8 Replies
View Related
Jan 10, 2011
In trying to upgrade from 10.04 to 10.10, the installation fails when checking software channels. The error basically says that there are breaks, broken depends and unmet dependencies. Yet Package Manager shows that there are no broken packages and mostly everything is running OK except for the Suspend option which doesn't work in 10.04 on a good number of various laptops. I am using an IBM Thinkpad R51 laptop with 1.5 GHz and 512 MB RAM. I have never had a problem like this with any Ubuntu upgrade in the past. How can I get past this problem and upgrade to 10.10? Log files available upon request. If log files needed, Someone on Launchpad said it's because I have third party software installed. But, this never happened before with previous Ubuntu upgrades.
View 9 Replies
View Related
Apr 17, 2011
Ubuntu Desktop 10.10 installer crashes using the "Install Ubuntu" option to install from CD onto IBM Aptiva 2139-E5D PC. Crash message preceded by several occurrences of error message "Warning! Error fsyncing/closing /dev/sda: Input/output error". (PC has IDE drive but Ubuntu uses SDSI device label?)The "Try Ubuntu" option boots and operates without incident from the same CD on the same PC .
During the startup for both options, the same error message occurs: "[126.012xxxxx] piix4_smbas 0000:00:07.3: IBM system detected: this module may corrupt your serial eeprom: Refusing to load module! ISO 9660 Extensions: RIP_1991A0xa0".I'm unable to access the /var/log/syslog and /var/log/partman files that were requested in the Installer Crash dialog box.
View 7 Replies
View Related
May 1, 2011
After login-in with gdm, the desktop fails to launch.
I can only move the mouse, clicking does nothing, no hotkeys; no desktop.
All I can do is change to a TTY.
I have tried restarting the gdm service; this just lets me log in again to the same stalled desktop.
The panel at the bottom of the gdm doesn't list any sessions, all it has is universal access and the time.
View 5 Replies
View Related
May 2, 2011
I tried to upgrade Mythbuntu from 10.10 to 11.04 but it fails to download three packages, stopping the upgrade from finishing. The APT source is au.archive.ubuntu.com
[Code]...
View 2 Replies
View Related
May 14, 2011
I am facing trouble installing java for chrome/firefox.I am a beginner, so cannot understand much of errors.I used terminal to install using instructions from java's download site.Something RPM fails while installation but displays DONE.
View 1 Replies
View Related
Jan 18, 2010
I had a dual boot Kubuntu 9.04 - FC 11 and decided to upgrade to Kubuntu 9.10. Recalling that I had issues with my ATI card drivers when I installed Kubuntu8.10 on my laptop, I decided to install the latest ATI Catalyst drivers. After the installation was complete I received a message warning me that if the X server fails to load I should run "aticonfig --initial -f". Indeed the X Server didn't load (after I logged in the screen flushed and went black). So I reinstalled Kubuntu 8.10 from a CD I without formating the respective partition. But the problem perists, X server fails to load. Even worse my menu.lst file has been changed and I can't boot FC11.
View 8 Replies
View Related
Feb 7, 2010
Whenever I try to install Ubuntu 9.10 x64 from a Live CD the installer freezes or quits when trying to partition the drive. I tried booting into the Live environment and using GParted but that would only let me make a ReiserFS partition without crashing. With the Reiser partition I tried the installation program again but this time the installer froze when trying to install the files.
My system specs are:
AMD Athlon 64 X2 6000+ (3.0GHz)
4GB RAM
500GB SATA2 HDD
ATI Radeon HD 4770
Currently it also has a second SATA2 HDD with Windows 7 installed but I disconnect this during installations
View 4 Replies
View Related
Mar 4, 2010
New kernel Fails to boot. video driver is current and I tried reinstall . The .19 Kernel works fine
View 2 Replies
View Related
