Ubuntu Installation :: 10.04 New Install Fails At 94%

Aug 24, 2010

I am trying to install 10.04 on a Dell XPS Gen 4 machine with Raid 0. I have 2 WD 74GB drives with a 128k stripe.

The install appears to be working great - then suddenly hangs trying to install Grub with the following error:

Unable to install Grub in /dev/sda. Executing 'grub-install /dev/sda' failed.

This is a fatal error.

I have tried choosing different partitions without any luck at all.

View 8 Replies


ADVERTISEMENT

Fedora Installation :: Upgrade RH9 To F10 - Install Fails - Installer Fails Media Check Due To "errors"

Jan 23, 2009

I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....

[Code]....

View 7 Replies View Related

Ubuntu Installation :: Install Step Fails: Select And Install Software?

Jan 7, 2011

I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.

View 8 Replies View Related

Fedora Installation :: F11 - Graphical Install Fails - Text Install Has No Fdisk

Jun 28, 2009

I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.

I tried many parameters, including xdriver=vesa, and it cannot used graphical install.

So, I tried text install, which I have done many times in the past.

However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.

It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.

What is the point of this option?

Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.

What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?

View 1 Replies View Related

OpenSUSE Install :: HP Tx2525nr Install Fails On 1st Reboot After Installation?

Jan 26, 2010

This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?

View 1 Replies View Related

Ubuntu Installation :: 10.04 Install Fails At 49% / Fix It?

Aug 9, 2010

I'd iso from Ubuntu website last week; burned to CD at 16x and verified. Tried installing as only OS onto used 17GB HDD in old 933MHz HP box w/ 2x256MB RAM; failed. Other tries (all failed at same 49% place): changed HDD to used 10GB; burned CD at 8x (slowest my burner will run) and verified data after burning; started CD in HP's burner drive instead of CD ROM drive; "downgraded" to 17" Dell CRT monitor (from 15" Sony flat panel). Both burned CDs will run in live mode.

View 1 Replies View Related

Ubuntu Installation :: 10.10 Fails To Install On IBM PC

Apr 17, 2011

Ubuntu Desktop 10.10 installer crashes using the "Install Ubuntu" option to install from CD onto IBM Aptiva 2139-E5D PC. Crash message preceded by several occurrences of error message "Warning! Error fsyncing/closing /dev/sda: Input/output error". (PC has IDE drive but Ubuntu uses SDSI device label?)The "Try Ubuntu" option boots and operates without incident from the same CD on the same PC .

During the startup for both options, the same error message occurs: "[126.012xxxxx] piix4_smbas 0000:00:07.3: IBM system detected: this module may corrupt your serial eeprom: Refusing to load module! ISO 9660 Extensions: RIP_1991A0xa0".I'm unable to access the /var/log/syslog and /var/log/partman files that were requested in the Installer Crash dialog box.

View 7 Replies View Related

Ubuntu Installation :: Fails To Boot After 1st Install?

May 20, 2010

I have Vista on my Samsung R60 + and have installed Ubuntu. On start up I get the dual boot option, select Ubuntu which then goes to completeing install etc, get some HD activity then nothing.

View 1 Replies View Related

Ubuntu Installation :: 10.10 Install Fails On Bootloader

Jan 6, 2011

I'm trying to install 10.10 x32 server, on a machine with the HW Raid-5. And install fails on Bootloader setup :/, so I continue with installation, and everything finishes fine.When machine boots, it obviously (since grub failed to install) says insert bootable media, and press any key. So I boot from the CD, goto rescue mode, installer environment:

>>mount /dev/mapper/server-root /mnt
>>grub-installer --root_directory=/mnt /dev/mapper/server-root
Wrong number of args: mapdevfs <path>

I tried to install OS multiple times, from full automatic HDD partition setup, to manual, and it always fails to install grub . I can mount, read/write /dev/mapper/server-root partition, and the contents of the partition looks like a valid OS.

View 3 Replies View Related

Ubuntu Installation :: Install Menu Fails To Appear?

Jan 9, 2011

I'm trying to install ubuntu from a disc that I downloaded and burned. I'm currently using windows vista, which recently got a virus and had to be reinstalled, so I decided to try ubuntu instead. My problem is that when I reboot my computer with the disc in the drive, it appears to be starting to boot, but instead of a menu, a purple screen with a picture at the bottom appears. I'm not very good with computers, but a couple of years ago I tried booting an older version of ubuntu to test it, and that worked just fine.Edit: I'm trying to install ubuntu 10.10, and I'm currently downloading ubuntu again to burn onto another CD, in case the CD is the problem.

View 9 Replies View Related

Ubuntu Installation :: 10.10 Fails When Trying To Install Grub

Apr 20, 2011

I'm new to Linux, and I'm trying to install Ubuntu on a PC that was home built a few years ago. It had XP on it and it ran fine, but i wanted to learn Linux, so I decided to install Ubuntu. I've tried a few different versions of Ubuntu, 10.04 and 10.10 to name a couple. 10.04 gets so far and the boxes all close and it sits there. 10.10 fails when trying to install Grub. I did get Xubuntu 9.04 to install but it fails when i do any updates/upgrades/software installation After it fails, it will no longer boot. Just a thought I had could be incompatibility with my mother board? I have a Mercury P4VM800M7 motherboard in it now. Hard Drive is a WD Sata drive that i just purchased brand new.

View 9 Replies View Related

Ubuntu Installation :: 10.04-alternate-i386.iso Fails To Install

Apr 30, 2010

Fails to insatll from a SD card using USB, it looks for a CD rom when there is none... will not allow me to go on without a CD rom? i need to encrypt my drive? why don't the normal cd do this just like the other linux sysetems? hide it if you have to.

View 1 Replies View Related

Ubuntu Installation :: 10.04 Install Fails At Disk Partition

May 7, 2010

had 9.04 install on a dual proc home built system that was running fine until a recent update wiped out grub. Since I have all my data backed up, I decided just to install 10.04. I select Use Entire Disk but when Ubuntu tries to install, I get this error:The ext4 file system creation in partition #1 of Serial ATA nvidia_dacaecb (mirror) failed.

View 7 Replies View Related

Ubuntu Installation :: Clean Install Fails To Reboot

May 18, 2010

I'm installing 10.4 x64 on a Dell PowerEdge R610 in a RAID 1 configuration and the install goes fine until I have to reboot the server to finish the install. On reboot after about a minute it gives the error.We've tried letting GRUB manually configure itself at the end of the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.In the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same.I've got 3 of these server to get setup and running as part of our back end and network restructuring and have been stuck at this point on the first one since Friday.

View 9 Replies View Related

Ubuntu Installation :: Fresh Install Fails On Boot?

Sep 13, 2010

Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.

Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.

Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.

View 2 Replies View Related

Ubuntu Installation :: Flash Dive INstall Fails

Dec 14, 2010

I'm trying to install Ubuntu Server 10.10 from a flash drive and I keep getting the same failure message. fs-secondary-module-2.6.35-22-generic can not be read. I used Universal-USB-Installer on two different USB drives, one brand new. I also downloaded the ISO twice.

View 3 Replies View Related

Ubuntu Installation :: 11.04 Beta2 - Install Fails With IO Error?

Apr 25, 2011

Anyone installed natty beta 2 from USB? Fails with errno 5 (io error) on me but ubuntu beta 2 worked fine with the same HD partition?

View 6 Replies View Related

OpenSUSE Install :: Installation 11.4 Fails ?

May 9, 2011

I wanted to update my 11.3 installation to 11.4. Everything went fine, but at the point the installation switched to the installed new system, it went completely wrong. This is the first time after more than 15 years of using (open)SUSE I have got trouble to install a new version.

What went wrong: the display shows some hundred miniature thumbnails of the screen to continue the installation. Only possibility was to switch to a console session. I did change the settings in initrd to NO_KMS_IN_INITRD to 'yes', then rebooted the PC. But the display is still unusuable. Then I tried the failsafe option, without any success. So I had to re-install the previous version, where I don't have this troubles. Fortunately, I made a backup of most of my settings, but it takes me still a lot of time to re-install everything, as I have to re-install a lot of libraries and recompile some programs.

I did a try with a live-DVD of Knoppix, the display is also scrambled but not so bad as with 11.4. Then I tried a live-CD of Kubuntu, and there anything worked PERFECT!

If openSUSE cann't give me a valuable explanation and solution, I have to consider to switch to Kubuntu after more than 15 years of openSUSE.

Some details of my hardware:
- graphics card: nVidia GeForce 6150SE
- driver: nouveau
- display: Acer HD 24inch screen with a resolution of 1900x1080

Remark: with the installation of 11.4 on other PC's of friends and family, I didn't have troubles, but they don't have such a high-resolution display.

View 4 Replies View Related

Ubuntu Installation :: Upgrade From 9.10 To 10.04 Consistently Fails / Install It From Scratch?

Apr 26, 2010

While trying to upgrade from 9.10 to 10.04, I consistently get the error:

Failed to fetch http://ca.archive.ubuntu.com/ubuntu/...e_1.34_all.deb Hash Sum mismatch

I've tried on multiple computers and on virtual box, in all cases using alt-f2 typing 'update-manager -d' and following the instructions from there. I've also tried downloading the link separately but get the same error.

Any ideas? Should I just install it from scratch?

View 1 Replies View Related

Ubuntu Installation :: Brother Printer Fails After Lucid Re-install

Aug 7, 2010

I recently re-installed lucid on a computer which had a working ethernet printer queue, to a Brother MFC-5490cn. I installed the drivers from the ubuntu package archive and set up two printer queues, one for "dnssd://<ip-address>" and the other "lpd://<ip-address>/BINARY_P1". The first appears to recognize that the printer color ink is low, so perhaps there is some communication, but nothing ever comes out of the printer. The second queue appears to fail completely.

I vaguely recall that for my previous installation I used the package supplied by Brother, but that it was very difficult, since the package no longer matched the Ubuntu file layout and locations.

View 4 Replies View Related

Ubuntu Installation :: Server Install Fails At Insert Disk?

Sep 24, 2010

i downloaded Ubuntu server from here, choosing 32-bit:[URL].. i burned the image to a CD. i booted it, and tried to install it. i went through a bunch of screens before it started to install. after a while i got an error message that reads: "Please insert the disc labeled: 'Ubuntu-Server 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.2)' in the drive /cdrom/ and press enter."

i don't understand this message. when i downloaded Server there was no message to save a second file for a second CD.

View 4 Replies View Related

Ubuntu Installation :: 10.04.1 Install Fails To Boot - Out Of Disk Error

Dec 27, 2010

Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>

I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?

View 9 Replies View Related

Ubuntu Installation :: Install Fails On Asus P8H67 Motherboard / Get It?

Apr 6, 2011

I just assembled a new computer with Intel Core I3 processor and Asus P8H67 motherboard and 4 MB of memory. It has a 2TB Hitachi Deskstar Hard Drive and Asus DVD. I am trying to load Ubuntu 10.10 directly (without first loading Windows) without success.

I have tried 4 separate downloads of Ubuntu - 64 bit, 32 bit with Desktop and Alternative. I have changed a variety of parameters and various tricks suggested on other threads. The Desktop (32 and 64) versions get me to Busybox shell with message (Initramfs) Unable to find a medium using live file system. The Alternative version hangs with the messages:
RAMDISK: Couldn't find valid RAM image startgin at 0;
No filesystem could mount root, tried ext3, ext2, ext4, fuseblk;
Kernal panic - not syncing VHS;
Unable to mount root fs on unkown block(1,0).

For parameters I think have tried them all (but not in all combinations). I tried exiting twice from BusyBox as suggested on forums but that just hangs the system. I also turn off the quiet and splash to try and see what is going on....but it is too complex and goes to fast for me to follow.

A final suggestion was that the P8H67 is too new for Ubuntu 10.10 and to try the new version 11 coming out...I am new to Linux and reluctant to try a Beta

View 3 Replies View Related

Ubuntu Installation :: Wubi Install Of Xubuntu Fails / Encountered This Bug?

Jun 23, 2011

I have tried twice to use Wubi to install Xubuntu on a Windows XP machine. Each time the results were the same:

1) Downloads the required stuff.
2) Does some post-download stuff.
3) Says it needs to reboot to finish the installation.
-------------- here is where it goes bad -------------
4) Reboots back into Windows. There is nothing set to choose Xubuntu (no error messages displayed in prior steps).

Has anyone else encountered this bug?

View 3 Replies View Related

Ubuntu Installation :: Server Install Fails At Insert Disk

Jul 27, 2011

i downloaded Ubuntu server from here, choosing 32-bit: [code]... i burned the image to a CD. i booted it, and tried to install it. i went through a bunch of screens before it started to install. after a while i got an error message that reads: "Please insert the disc labeled: 'Ubuntu-Server 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.2)' in the drive /cdrom/ and press enter." i don't understand this message. when i downloaded Server there was no message to save a second file for a second CD.

View 3 Replies View Related

Debian Installation :: Ca-certificates Fails During OS Install

Mar 1, 2016

I'm trying to install Debian Jessie, but the installation keeps failing when installing the ca-certificates package and then asks for a media change to the disk that is already in the drive, and keeps asking even though it's already in the drive.

View 0 Replies View Related

Debian Installation :: Partitioning Fails During Install?

Feb 11, 2011

So I am helping a friend (computer n00b) to install Debian Squeeze over the telephone, since his Vista had crashed, and after we set up the partitions like so:9   GB   /1GB      swap  150 GB   /homeIt "hangs" for a while, i.e. nothing happens, and then it says that it "failed to partition disks". It did not give any error codes, and I did not see the message first hand, since I was doing it over the phone, but I was thinking that there is something wrong with the hard drive (causing Vista to crash perhaps?) so could this be circumvented by just using the first (or last) 10-15 GB of the disk?

View 7 Replies View Related

Fedora Installation :: Keyboard Fails During 11 Install

Sep 10, 2009

I am attempting to install Fedora 11 on a Dell Windows Server 2003 computer from CD (I just want to override the Server PC with F11). I used this media in my class last night after testing it, so I know the media itself is good. We did have lots of issues getting the keyboard and mouse to work during the install attempts last night, too, but eventually it worked. Unfortunately, at home is a different story!

I boot from install Disk 1 and get to the first screen with the option of testing the media or skipping it and I only get one keystroke then nothing. F11 just hangs/stops/freezes/locks up. Reboots don't help and I attempted to install from the F11 DVD I made, too, but the machine completely wouldn't see that disk at all! The keyboard is connected directly to the computer via PS2. I don't have a USB keyboard laying around nor an adapter to try.

I would love to hook up my children with F11! I did manage to figure out what files to download, burn to disk and how to install F11 at school yesterday).

View 2 Replies View Related

Fedora Installation :: F12 Fails To Install Timezone

Feb 26, 2010

I'm newbie in Linux, but have used Windows and Mac OS X Leopard. Used RedHat in the past, and can't figure this out. I burned Fedora12-x86_64 DVD image on DVD, and start install. Whether I use "linux text" command from boot or just select Install at graphical prompt, everything goes OK until I select hostname. I leave it as "localhost.localdomain" and press Enter. It always give me an error "Can't load class=TimeZoneWindow".

My computer is connected via ethernet to my router, and I had no problems getting online in Windows. Now, in case there are hardware questions:
Intel Pentium 4 with HyperThread enabled and 64bit support (Windows 7 Ultimate 64bit runs perfectly in 64bit mode)
2Gb of DDR 400Mhz RAM
I have 2 SATA hard drives with RAID option as Mirror (BIOS settings - RAID or AHCI)
And 128Mb ATI RAdeon X300 series. Pretty simple, but this error aborts my installation.

I tried to do Anaconda updates, but I have no clue about URL where the image is, ex:
linux updates=[URL]
or I tried configuring network:
linux ip=192.168.1.113 netmask=255.255.255.0 gateway=192.168.1.1 dns=68.193.158.40,24.115.70.53
and no luck. Why does "Can't load class=TimeZoneWindow" appear? Is it a network issue or what? I've seen the screenshot for TimeZone screen in the Installation Guide, but I never get to it.

View 13 Replies View Related

Fedora Installation :: Install Fails Due To Not Being Able To Mount

Dec 27, 2010

I am saddened that I can't install any Linux distro with ease on my HP m8530f computer which runs on a m2n78-la motherboard. It has a Phenom CPU, 6 SATA ports and probably a fakeRaid (at least that's what I guess is causing problem). The Fedora 14 Desktop install goes all the way to the end and then I get a fail message due to not being able to mount /dev/mapper/xxxxx.

P.S. the motherboard only has SATA mode or disabled for HardDrive mode and no any other options. Seems like this is an HP custom made motherboard from Asus hence the limited options in Bios setup.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved