I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
I am dual booting a lab of 30 machines in an elementary school. They already have XP installed and I don't want to mess with that. I certainly don't want to have to go to each one with a windows CD to 'repair' each one if this goes wrong.
So i tested on one (installed through PXE) and Ubuntu boots fine but I am getting:
'ntoskrnl.exe is corrupt' errors now. I can't move on until I sort this out.
I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed
#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub
and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:
fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
[code]....
Using the mini.iso netinst image, when installing the the base system I get the following error:
Debootstrap error, the following error occurred: bzcat is not available on the system. Check vt4 for details, etc, etc.
Usually I have no issue at all installing a barebones sid system, but over the last week I've had the same error over and over.
The issue appears to of been resolved. I guess something server side was tweaked.
I am trying to reinstall ubuntu on my asus eee netbook. When I try to open ubuntu an error message appears saying that this file <windowsroot>system32hal.dll.> is corrupt or missing. How to I reinstall this file/what happened?
View 3 Replies View RelatedSo I have a single hard drive with two partitions, and I am trying to install a dual boot of Windows XP and Ubuntu. However, I am having an issue installing the Windows XP component.
I keep getting an error along the lines of a missing/corrupt hal.dll after the first restart in the install. This has happened every time I tried to install windows XP, from several different discs, all of which I have confirmed to work on another computer.
I have tried several things for fixing this, from repairing the MBR and boot.ini to replacing hal.dll from hal.dl_, and nothing works. However, Ubuntu 10.04 installs and boots properly.
What I can do to get Windows to install properly?
I have currently installed Xubuntu via wubi on my windows XP. When I try to boot, it displays an error message stating that wubildr.mbr is missing or corrupt and I cannot boot into xubuntu.
View 2 Replies View RelatedIm currently not an linux expert so I turn to this forum after several attempts to fix my issue with grub.
I had a dualboot single HD with both win7 and win8.1 when I decided to install debian wheezy from usb.
I deleted the win7 partition and installed debian there. The partition scheme is separate /home
After reboot I automatically get into the "Grub rescue mode" and now I´m stuck.
I tried the commands:
set prefix=(hd0,msdosX)/boot/grub/
Insmod normal
I have msdos1, msdos3, msdos5 and msdos6 but nothing is listing anything from the grub rescue mode.
I get the "UNKNOWN FILE SYSTEM" error and cant get past that.
I also tried booting into rescue mode from usb iso install but nothing happens when choosing to repair GRUB.
The listed devices in rescue mode are:
/dev/sda1
/dev/sda2
/dev/sda3
/dev/sda5
/dev/sda6
debian uses sdb 1-2 and sdb1 is the only option to Reinstall GRUB on but it gives me "Unable to install GRUB in /dev/sdb1 This is a fatal error" message
/dev/sdb1
/dev/sdb2
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies View RelatedI was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
I am trying to install debian from a netinst cd. Everything seems to go fine except when the installer needs to connect to a mirror. It doesn't throw up an error, it just hangs a bit and then seems to keep going a lot quicker than i would expect. For example, when installing additional software, it gets stuck downloading the first few files for about 5 mins and then skips ahead and finishes the entire process in about 5 mins.
What I end up with is a very bare bones system when I fist boot into it, without any of the stuff that I had indicated that I wanted to install (ie desktop environment, web server, etc). The Internet connection works and I am able to ping websites including a number of the mirrors I tried during the install. However when using apt-get it just gets stuck trying to connect to the mirror and doesn't go any further.
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedI installed debian testing from hard disk using the netinst.iso. Now how can i get the rescue mode to reinstall grub? During installation i didn't get other options like rescue mode.It guided me to install debian testing from hard disk only.
View 2 Replies View RelatedI'm typing this command in terminal ;
Code:
sudo -s
my password then ;
gedit /boot/grub/grub.cfg
My windows (system) disk is in /dev/sda5 but when I look grub.cfg file windows system disk is in /dev/sda1. When I want to save this file I take an error. Could not save the file /boot/grub/grub.cfg. You are trying to save the file on a read-only disk. Please check that you typed the location correctly and try again.
annotation : error in windows is : missing or corrupt <windows root>system32hal.dll.
Was I the only one having failure issues trying to install any Debian ISO Yesterday?I got big red screens about corrupt files all while trying to install Wheezy and Jessie.All with ISO versions downloaded and burned yesterday, net install. Disc and DVD.Mint and later Fedora installed perfectly well, but I wanted Debian.
View 1 Replies View RelatedI was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies View RelatedI downloaded the first Lenny DVD for amd64, wrote it but on trying the install on my laptop (Gateway NV5389u) I cant get past the installing base system step: I get an error that some files are corrupt / cannot be read from the DVD. I am wondering whether there's a way I can download a minimal version or just the files needed for the base system installation then use the same DVD to install the packages, coz I have a terribly slow internet connection it took me a whole 2 days to download, and I surely cant stand any more of it.
View 4 Replies View RelatedI've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
I used to have Windows XP Professional on my computer, then I decided to install Ubuntu but it didn't work for me it gave me really weird errors, I thought I uninstalled it, and then I installed Debian on my computer, Debian ran smoothly but when I tried to start Windows the GRUB from ubuntu appeared and when I tried to start windows again it showed and that the hal.dll was missing, I reinstalled Windows but still the same error appeared, this also affected my Debian GRUB so I had to install it again, I don't know what I should do in this case. How can I delete ubuntu's GRUB for good? I've already formatted my windows partition but it keeps using Ubuntu's GRUB.
View 3 Replies View RelatedRecently, I did a netinst Debian install (on a C554US compaq presario), and while the net worked fine during install, I didn't seem to have a network connection (I use dhcp, mind you) or even an eth0 set up. I've used Debian before, but it was awhile back and I can't remember it all that well, but I DO remember having had net back then (previous version). I'm using Debian Testing, if that helps explain what might be wrong, and I can't help but feel it is my own mistake which caused it.
View 4 Replies View RelatedI download the lastest stable netinst, debian-7.6.0-ia64-netinst.iso.
And then proceed to follow these instructions.
4.3.1. Preparing a USB stick using a hybrid CD or DVD image
Code:
Select all# cp debian-7.6.0-ia64-netinst.iso /dev/sdb
# sync
Unfortunately, the USB will not boot.
The instructions I am following tell of creating "a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it".
# mount /dev/sdX2 /mnt
# cd /mnt
# tar zxvf /path/to/firmware.tar.gz
# cd /
# umount /mnt
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies View Related First off I must state that I am basically completely foreign to linux. I have 2 hard drives, one with windows 7 and storage partitions, and the other with my linux partition, linux swap, and unpartitioned space.I initially partitioned my drives with Disk Management in Windows 7. I created an NTFS partition on sda and installed Ubuntu from within Windows (a Wubi install I suppose). I originally intended to install by booting from the iso I burned onto a CD,but the installer was failing to load (fonts would change and it would error message). LiveCD was failing to load too in the same fashion. After hitting alt and tweaking the F6 settings, LiveCD successfully loaded (my very first taste of Ubuntu, albeit somewhat bland). I then decided to reinstall Ubuntu with proper linux partitions from within LiveCD. Now when I select Ubuntu in the Windows Boot Manager, a WBM screen says the file:
ubuntuwinbootwubildr.mbr is missing or corrupt. I do not know if this file is the problem or merely a symptom of it Below I have copied my Boot Summary (my apologies for the length and extra partitions):
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda[code]....
I noticed today I downloaded the amd64 netinst ISO for 'testing' and during the installation, it warned me of a the fact that I was installing using the 2.6.30.x kernel and I am now attempting to install a 2.6.32.x kernel. Is this is a common warning because I have never seen it before. I got it with both the netist & the businesscard image. Has anyone seen this before and is this a problem? Just trying to understand whats going on under the hood. I don't have the error in front of me since I am on my phone away from the office.
View 5 Replies View RelatedI have a Redhat Enterprise Linux system and I want to re-make it as Debian. I downloaded the Debian netinst iso but can't seem to make a bootable CD out of it, and I haven't found any adequate explanations anywhere.
I tried burning the iso directly to a disk. i set up the boot order in my BIOS but when I restart the machine it spins the CD drive a few times and then moves on to the hard drive.
I tried expanding the iso into a directory, and then copying all those files into into the "Blank CD-R Disc" on my Gnome Desktop, burnt the CD, and still no boot.
I found some instructions using X3b, but X3b was giving me errors.
Last week I installed the Debian 6.0.4 XFCE on to a system from an iso I burned to DVD. I had no problems.
Today I downloaded the 6.0.5 netinst iso and burned a CD to install on a system which has only a CD reader, not DVD. The install goes fine until I select a download mirror. No matter what mirror I select, I get "Bad Archive Mirror".
When I check the log in virtual console 4, the following message appears: "WARNING**: mirror does not support the specified release (squeeze)"...
Im trying to install Debian on my server. Some hardware descriptions:
- Inel Xeon processor
- 03:01.0 RAID bus controller: Adaptec (formerly DPT) SmartRAID V Controller (rev 01)
There is configured by hardware one RAID 5 on four scsi disks of 73GB. I tryed with Lenny and Squeeze versions and both presented the same error when the install try to install grub:
main-menu[1250]: INFO: Falling back to the package description for auto-install
main-menu[1250]: INFO: Falling back to the package description for ai-choosers
main-menu[1250]: INFO: Menu item 'grub-installer' selected
[code]....
I just was wondering how can I install Fedora, using the netinst.iso? I cant seem to find some documentation on the subject. Must be overlooking something.
View 4 Replies View RelatedI just netinstalled Squeeze to a netbook with Windows7. The installation went well without any problem. Linux is also working OK. When I boot now, grub does not show Windows7. I took default settings during installation. I mean I did not do anything special. What should i do to fix it? Should I run osprober and grub-update?
View 3 Replies View Related
