General :: Grub Menu Freeze - Hard Frozen - Nothing Works
Aug 31, 2010
I am attempting to boot both OSX 10.6 and Enterprise Linux 5. This is what I did: sudo yum install grub.x86_64
[Code].....
Now, however, when I restart and choose to boot from the Linux partition, I receive the "loading GRUB stage 2" message, and then I receive the standard GRUB menu where I should be able to just press enter and proceed. However, instead of letting me choose a boot option, it just freezes. It is hard frozen. Nothing works. I have two keyboards hooked up, and neither the arrow keys, nor any other keys will cause anything to happen. Even after waiting several minutes, it remains frozen, even though the timeout is set to 10. What on earth is causing this freeze? I am using the exact same instructions in my grub.conf that work on the grub command line. If I delete grub.conf, then it goes back to the GRUB command prompt where I can manually type everything in, and it always works.
View 10 Replies
ADVERTISEMENT
Jul 16, 2009
How do I add another Windows XP SATA Hard Drive to this Grub menu, on a USB Stick?:
timeout 30
default 0
#
[code]...
View 2 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Feb 23, 2011
I just bought a Intel D525MW ITX board, a PicoPSU and a stick of 2GB ram.
I burned the new stable debian netinst to a disk and booted it up from a usb cdburner. At this point I had a usb keyboard and a usb kingston pen drive (temporary / ) connected. The computer would freeze whenever I chose a menu item. I rebooted a couple of times, same thing. I disconnected the usb pen and were finally able to start a graphical install. I quickly reconnected the pen and the install went fine as far as I could see.
Now. When I boot from the pen it just freezes showing "GRUB lading. Welcome to GRUB!" and a blinking underscore.
I were able to boot the usb pen on my Alienware laptop just fine - although it wanted a reboot after it ran a fsck.
View 2 Replies
View Related
Jul 28, 2009
I am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
View 3 Replies
View Related
Oct 13, 2010
Here on a HP Laptop. After a clean install of 10.10 the Systems freeze for 3-4 sec after every mouse click .
View 5 Replies
View Related
Oct 18, 2010
I'm currently upgrading from 10.04 to 10.10 and the screen is stuck at:
Code:
*** 00_header (Y/I/N/O/D/Z) [default=N] ? y
Installing new version of config file /etc/grub.d/00_header ...
[code]...
View 2 Replies
View Related
Feb 6, 2011
Im trying to install Ubuntu, here are my problems and the solutions ive tried: I've downloaded 10.10 in 64 bit and 32 bit. I've also tried with 10.4.1 LTS.I've tried burning it to a disc and i've tried making a bootable USB. (I ran out of dvds so im only trying from usb now).I load from the disc/USB and ill get the menu asking if i want to try ubuntu, install ubuntu, check for errors etc..... I choose try ubuntu and ill get the UBUNTU logo with the loading dots undernieth.The screen then glitches and theres multicolor lines frozen accross the monitor. Stuck that way until i restart.This also happens when i try to install it to the harddrive.It happens on both versions in both 64 and 32 bit. I checked the disc and all files are present.I've had ubuntu installed over a year ago.
AMD 64 3200 processor
nvidia geforce 7800gt
2gb ram
What should i do? Heres an image i took with my phone. http:[url].....
View 2 Replies
View Related
May 14, 2010
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies
View Related
Oct 14, 2010
just want to report "Right Mouse Click Freeze" on Ubuntu 10.10. When I click on anything with my right mouse button to open options menu it freezes and does not open menu. Sometimes when I shake my mouse left/right a bit it opens that menu, but this does not work always. It seems like xserver issue, but I'm not sure since I'm not expert in linux yet. It's very annoying issue that I would like to resolve asap.
My System Specs:
Intel Core 2 Quad Q6600 @ 2.40GHz
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400)
Western Digital 250 GB Hard Drive
Ubuntu 10.10 64-bit (Kernel Linux 2.6.35-22)
(Used Desktop Install CD)
View 2 Replies
View Related
Dec 7, 2010
Eee PC 1005HA : Ubuntu 10.10 Netbook Remix, using Desktop Edition at login screen, using Awn in place of Unity: No clue what's causing this. Menu pixels freeze, remain on top of windows. Cursor floats over, but interacts with the actual active window. Can't move it. This has happened several times now, but usually only lasts a few minutes. At the time of this post, these pixels have been frozen for at least 20 minutes. Relogging fixes the problem, but logging out and in again every time this happens isn't really an option.
View 5 Replies
View Related
Jun 15, 2010
I've been getting a random hard freeze, in both windows and linux, so I'm pretty sure it's not a software thing. I've run memory diagnostics in windows and it came out fine, I'm not sure what other diagnostics I can run. what tools can I run in linux that might help me further diagnose the problem? I haven't installed any new hardware, and I blasted the inside with some compressed air to err on the side of caution, but I still have problems. i'm running the latest ubuntu ver btw
View 2 Replies
View Related
May 16, 2011
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies
View Related
Sep 3, 2010
I have installed ubuntu 9.10 after the windows xp os, and then my grub.cfg file only contained information about linux.. my windows os couldnot be booted..But thats fine because i now work only on linux, so I could normally boot into ubuntu..
But now i tried to install fedora 12 on that partition on which windows was installed, and i set the space of that partition as "free". And then something went wrong, and i could not install fedora.
Now wen i boot into the normal ubuntu linux from the local hard disk, this error appears on screen - "No bootable media present, enter bootable disk and press enter."
I can boot into the installed os by first booting from a live cd, and selecting the "boot from local disk" option. But i cannot boot without a live cd.
I also reinstalled grub-pc package, but no change.
View 9 Replies
View Related
Nov 3, 2010
How can I modify my grub menu? I remember that on openSuSe was /boot/grub/menu.lst. But in debian there isn't it. In ubuntu is the same for modifying grub menu?
View 1 Replies
View Related
Mar 3, 2010
My problem is that within a few minutes of booting the machine, it freezes. The keyboard and mouse do nothing; the keyboard LEDs do not light up. Whatever is on the screen stays there - X or a console. Ctrl-Alt-Del does not work; neither does Alt-SysRq-REISUB. The machine stops responding to ping and won't accept any remote connections. I have to do a hard reset with the power button.
Sometimes it happens during the boot process; sometimes it's a few minutes afterward, and I get to look at log files for a while until it stops responding.
Here's what I've tried:
It happens in recovery mode as well as a regular startup. It happened when I booted from an Ubuntu Server CD and did rescue mode. I ran memtest86+ and it completed successfully with no errors (and it didn't freeze) It doesn't happen if I just sit in the grub menu for a while. I've looked at what log files I can; there's nothing that looks like a severe error, and it fails at different times during the boot process, so it doesn't seem like whatever's going wrong is getting logged. It happens with the latest kernel I have (2.6.31-19-generic), as well as the oldest (2.6.28-16-generic) It seems like there must be some hardware issue, but I'm not sure where to start looking.
View 2 Replies
View Related
Apr 19, 2010
change the boot menu - GRUB
I regularly update my ubuntu (10.04), and new minor versions keep accumulating on the GRUB screen. Right now I have 5 different versions listed on the GRUB, even though I always select the latest version to work with.
Am I supposed to do anything to get rid of the old version references? Do these old versions affect disk space/performance?
View 2 Replies
View Related
Aug 4, 2010
I have two separate Linux installations on my system which I can access from grub. Is there a way to get back to the grub menu to access the other system without having to reboot?
View 2 Replies
View Related
Aug 16, 2011
I had Windows Vista installed on my computer and created a partition to install Fedora 15. I chose the option to install fedora on any free space, so it should have installed on the empty partition. When I boot up, there are two boot options. Fedora and Other. When I select other, it gives an error:BOOTMGR not found.Is there a way to add Windows Vista to the Grub Bootloader by editing the grub menu. I don't know if it will help, but here is what I get when I run fdisk in the terminal:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
View 1 Replies
View Related
Jan 9, 2010
if it's possible to see or retrieve from the system which menu option from the grub boot menu was selected afterall.
View 1 Replies
View Related
Feb 1, 2011
I had debian squeeze already installed, then installed win 7. Windows overwrote by MBR, as I expected it to, so I used an ubuntu live cd to reinstall grub2 to debian root.
I rebooted, and sure enough I had grub back. The boot menu has debian on it. Just debian (crunchbang actually, but its the same thing).
So I added a script in /etc/grub.d (called Windows_11) to create a windows chainloader entry in grub.cfg, and ran update-grub.
Update-grub picks up my /etc/grub.d/Windows_11 script, and adds an appropriate chainloader entry to /boot/grub/grub.cfg.
So I would expect this new chainloader entry to show up in my boot menu when I boot up. But it doesn't; on booting I only have the option to select debian.
Here is my /boot/grub/grub.cfg -
Code:
### BEGIN /etc/grub.d/10_linux ###
menuentry 'CrunchBang Linux, with Linux 2.6.32-5-686' --class crunchbang --class gnu-linux --class gnu --class os {
insmod part_msdos
[Code].....
View 11 Replies
View Related
Jun 9, 2011
I have a fresh installation from the demo ISO image of F14 running on an Acer TravelMate 4200. The system is a Dual Boot with win Vista. Windows Vista runs without any problems but when using F14 a kernal crash constantly occurs and it then hard freezes or hangs and the machine needs to be cold booted. There is nothing in particular that I am doing either, the problem happens when the machine is idol or when I am working in various apps.
The F14 system is completely up to date running kernel version 2.6.35.13-91.fc14.i686. The following error below is from the automatic bug reporting tool and I have reported this using the tool:
Package: kernel
Latest Crash:Sat 04 Jun 2011 14:55:00
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 000000f8
Comment: None
Bug Reports:
View 2 Replies
View Related
Apr 26, 2010
I was opening up a ODG doc and then my pc froze up. I powered it down, but now its telling me upon trying to open up the document again that someone else is accessing it so its locked.
View 1 Replies
View Related
Feb 15, 2010
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
View 5 Replies
View Related
Apr 29, 2010
I want to edit the GRUB menu in ubuntu but Menu.1st is missing.When I open the /boot/grub.cfg from terminal I cant save it.
View 7 Replies
View Related
Apr 22, 2011
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies
View Related
Sep 13, 2009
Here is how I created a Grub2 boot-cd with a (grub.cfg) menu:
mkdir /tmp/cdroot
mkdir /tmp/cdroot/boot
mkdir /tmp/cdroot/boot/grub
cp /boot/grub/grub.cfg /tmp/cdroot/boot/grub
cd /tmp
[code]....
NOTE: The above proceedure assumes you already have a grub.cfg file. If you don't, create one in the /tmp/cdroot/boot/grub directory
View 6 Replies
View Related
Jan 31, 2010
In my Red Hat 7.2 , the /boot/grub/grub.conf has the following data :
But when I reboot my Red Hat server , I don't see the Grub menu to say edit the boot kernel .
View 15 Replies
View Related
Sep 11, 2009
I hav two 40 GB hard disks.RHEL5 is installed on 1st and Windows on 2nd. In order to use each OS I manually hav to go and change the "first boot device" option in BIOS setting and boot into required OS. GRUB doesn't show Windows in its boot menu.How can I make GRUB recognize Windows and boot into both OS using GRUB boot menu?
View 1 Replies
View Related
Jul 15, 2010
I have noticed whenever someone install Ubuntu 10.04 the grub menu doesnt get display. Is this a bug? Recently I did installed Ubuntu 10.04 with Windows as dual boot config and I did notice nothing like menu.1st instead it had grub.cfg. how to fix it?
View 2 Replies
View Related
