Ubuntu Installation :: Dual Boot With XP - 4 Different Partitions - No Success Intalling Ubuntu 10.10?

Nov 22, 2010

For the past 4 days Ive been trying to install ubuntu 10.10 64bit with no success. I am a total newbee when it comes to linux so I will be needing your kind help with it.At first I installed ubuntu to one of my portable drives with no problems, but now I want to install it to my hard drive and have a dual boot between windows XP and Ubuntu.

When I arrive to the manual partitioning part is where I get lost. I have totally destroyed my windows installation 5 times already ( thank god for norton ghost for restoring my windows installation. )

I have read several articles and blog posts regarding a dual boot system with windows and Ubuntu but none of them cover my specific situation so I keep getting lost and screwing things up.

[Code]...

View 2 Replies


ADVERTISEMENT

Ubuntu Installation :: 9.10 And XP Dual Boot - Resizing Partitions

Apr 15, 2010

I have a dual boot system 9.10 and XP. The hard drive is 234. For some reason during the install I only allocated 128 to windows and 16 to ubuntu. Or at least, gparted tells me I have 127.99 NTFS and 104 unallocated (=231G ??).

System monitor tells me I have the following:
/dev/loop0 is ext4 = 16 G total
/dec/sda1 is host = 128 G total
this is 134G total

From windows, the partitioner tells me the same. I have 104 of unallocated disk space and 128 of NTFS. I assume the 16G allocated to ubuntu is inside the 128G?. How do I get that additional 104 into ubuntu without screwing up the MFT of windows. Or can I? Is it as simple as telling gparted to format the space? or will that mess windows up?

View 2 Replies View Related

Ubuntu Installation :: Setting Up Partitions For Dual Boot?

Jun 2, 2010

So I wanted to dual boot Ubuntu with Windows 7, but have no idea how to partition out Ubuntu. At the moment, I'm working with a 300GB harddrive that will solely hold installed applications and stuff like that. Any shared/storage data will be put on separate harddrives altogether.

I plan on using a 40-50GB partition for Windows 7 alone (no installed applications and stuff). And here come the questions about Ubuntu partitioning. From what I read, do I only need three separate partitions? (/, /home, /swap) Even then I'm not 100% sure what each of these partitions represent. But my research says... / = equivalent to my Windows 7 partition, /home = the partition where installed applications go and other non-essential Ubuntu stuff, /swap = virtual memory

With all that said, to comfortably run Ubuntu can I have my partitions be these sizes?

/ = 10GB
/home = 20-30GB
/swap = 2GB (Do I even need this if I have 2GB of ram?)
Windows 7 = 40-50GB
W7 Apps = remaining space

I don't know what exactly I want to do with Ubuntu, but is a /home of 20-30GB adequate to install lot's and lot's of apps?

View 5 Replies View Related

Ubuntu Installation :: Partitions For Dual Boot Windows 7?

Jul 27, 2010

I'm setting up a new Dell as dual boot. I'm leaning toward first partition for Windows 7, a second partition that can be accessed from either OS, and an extended partition that will have root, swap, /home, etc. For the partition to be accessible to both, what is the preferred format? I've read that FAT32 or NTFS will suffice. ext4 is what I understand should be set for the linux partitions. For the linux partitions, is there an advantage to setting one or two of the partitions as primary, rather than logical? Also, any clear advantages or disadvantages to having a /boot partition? It is likely I'll only have installed one version of Ubuntu at a time.

View 9 Replies View Related

Ubuntu Installation :: Setting Up Dual Boot / Partitions

Dec 18, 2010

I'd like to dual-boot it with Windows 7, but I'm not sure exactly how I should set things up. Searching has helped but I would really appreciate advice specific to my scenario. Windows 7 to run a couple games (mainly Starcraft II) and for anything that doesn't run on mac or linux, and Ubuntu to do most of my normal everyday stuff (documents, programming projects, web browsing, listening to music).Hardware: 1TB hard drive, 4GB RAM, AMD Athlon II 435 processor.

View 2 Replies View Related

Ubuntu Installation :: Create Partitions For Dual Boot?

Feb 22, 2011

I would like to install Ubuntu in a separate partition. I currently have Windows XP on the C drive.

I have the following config on my Presario Laptop:

60gb SATA hard drive
41.6gb available
3% fragmented

I would like to partition the hard drive to install Ubuntu as a dual boot. how I need to do this or point me in the right direction? I did begin an install from a cd I burned from ISO. I started by just going for the auto installation and what it recommended. However, when I tried to install, I got an error message that changes were uable to be written to disk and had to abort??

Assuming I can get past the error I would like to know how to create the partitions for root, home and swap and how much space for each.

View 2 Replies View Related

Ubuntu Installation :: Dual Boot XP And 10 - Can't Read From Windows Partitions

May 19, 2010

I am editing this post to save people time and effort. This is one of those "Pilot Error" issues or faulty readout issue, not sure which. It turns out that when I saved a document in PDF format to my NTFS Drive (the one I want to share between Windows XP and Ubuntu 10) the .PDF file extension was missing.

1. Ubuntu identified the files as a PDF document (even though the file extension was not there)

2. When trying to access it by double clicking it, the message was "Unable to open document, Permission Denied"

The problem was not permissions, and it was not a PDF file according to the default Document Viewer, but it WAS a PDF file according to the directory listing. The permissions message really had nothing to do with the problem, and identifying the file as a PDF document when it didn't have an extension, was another problem. What SHOULD have happened is a file without an extension should not be identified as a PDF file or If Ubuntu says it's a PDF file, and I double click it, why is the message "Permission Denied" ?? How about "No File Extension" or something like that?

Read the following if you want to see what my problem WAS before I just appended ,PDF to the filename, and now it works fine. On the positive side, installing XP first, then setting aside a large chunk of space for a shared NTFS drive, and THEN installing Ubuntu in the free space works fine. I installed a new 320 GB drive on laptop. Installed Win XP in 32 GB Set aside 250 GB for another Windows partition using MANAGE and formatted D: as an NTFS drive Then successfully Installed ubuntu 10 into remaining unused space. Problem: Ubuntu cannot access files from D: (NTFS Windows) partition. but it can WRITE files without problems, and create directories, just not read them. Have set properties of the Windows drive to shared, still nada. Any trick I'm missing? If I plug in an external USB drive, Ubuntu can read/write to it easily, it just can't read from the 250 GB partition formatted in Windows XP that I wanted to share between operating systems.

View 9 Replies View Related

Ubuntu Installation :: Windows Takes Up 4 Partitions Already (dual Boot)?

Aug 14, 2010

I would like to install Ubuntu on an HP Laptop, but they have taken up the whole disk with 4 partitions. I have removed Linux partitions and made an extended one in it's place creating new UUIDs before, but i am worried that windows will not recognize the new partition.

View 9 Replies View Related

Ubuntu Installation :: How To Split HDD Into 2 Partitions (Dual Boot With Win7)

Oct 4, 2010

I'm completely new to Ubuntu, and haven't actually installed it yet, so my questions aren't concerned about how I use it, but rather the problems of installment and more importantly how to get started. The first thing I got a little question for is how to split my HDD into two partitions in order to install Ubuntu, as I will be dual-booting it with Windows 7. The second thing I want to ask about is how big the risk of corrupting my HDD is when installing Ubuntu, and whether I can take some precautions in order to reduce the risk of said thing. The third thing I'm gonna ask about is how to get drivers for my graphics and that alike. And fourth and last: Is it going to make a difference that I'm running it on a laptop?

View 9 Replies View Related

Ubuntu Installation :: Partitions Dual Booting And Got Grub Boot Errors?

Mar 29, 2010

i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.

the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.

View 9 Replies View Related

General :: Inspiron 2600 Install Success (finally) - Dual Boot Now Gone Bad?

Apr 29, 2011

Dual Boot Gone Bad I have been trying to set up a dual boot laptop on an old Dell Inspiron 2600. I got the machine cheap, and it is in excellent condition. I have upgraded the Bios to A11 (it was A4 when I got it) and put in a 40 Gig HD. It is maxed-out in memory at 360 Mb. It has the awful (by today's standards) Intel i810 video mess. I created an NTFS (primary) partition on the first half of the drive and installed XP, updated through SP3. I then attempted to install Debian 6 (squeeze) on the second half. I was unable to get anywhere with an installation using a squeeze Live CD. The screen just goes blank about 60 seconds into the installation, and everything freezes up. In rescue mode, I can get some screen play, but the rendering is awful and half of what you do is actually off the screen and you can't see what it is you are doing.

I hooked up a separate monitor, and was able to watch the installation just fine until it reached a certain point in the boot-up, then everything again went blank and the machine again froze up. I tried Ubuntu 10.10, Ubuntu 10.04 LTS, Mint 10, and Ultimate Edition 10.10 with varying degrees of success, but none completing and working.

The Ubuntu 10.04 LTS actually installed, but I could not get sufficient graphics in either a terminal (entered at the end of the install process just before re-booting) or booting to text only mode to sudo a change to the xorg.conf file that was native to the system, rather than to the installation package itself (which goes away when you reboot).

I was able to install 'squeeze' using the 'expert graphical install' mode under 'advanced options' (it lets you select a screen resolution when it starts the install), and when I got to the end of the installation, before re-booting, I told the system to open a monitor as 'root', and wrote what I thought would have been an appropriate xorg.conf file in the /etc/X11 subdirectory using nano (monitor and driver specs, as well as suggested xorg.conf entries obtained elsewhere on the web).

[Code]...

I'M SO CLOSE! Can somebody help me and tell me how to edit GRUB so it again recognizes the partition... or reinstall GRUB.... or let me know if the problem is with the XP MBR.... And if so, maybe hopefully lead me to how to fix THAT issue without screwing up the Debian install (I know this isn't an "UGH"- Windows forum). If worst come to worst, I can delete all the Linux partitions, use my Windows install disk to repair the MBR, and reinstall lenny.... Hopefully with GRUB not losing XP this time. I hate to do it because it has taken me a couple of days to get ANY form of Linux actually working right on this machine..... but at least I know how to do it now and what distro will actually work.

Also, anybody with a clue as to why squeeze won't boot after what appears to be a successful installation (with the above-listed xorg.conf file in place) and what I can do to fix that issue would also be appreciated. It will be nice to have a system installed that has current support next year.

View 6 Replies View Related

Debian Installation :: Dual Boot Windows And Linux Partitions

Dec 28, 2015

I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.

Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.

CURRENT DISK PARTITIONS:

Code: Select allsda1  |  550M   |  EFI System
sda2  |  128M   |  Microsoft reserved
sda3  |  175.8G |  Microsoft basic data
sda4  |  286M   |  Linux filesystem (Boot)
sda5  |  28.2G  |  Linux filesystem (Root)
sda6  |  91.3G  |  Linux filesystem (Home)
sda7  |  1.9G   |  Linux swap

[Code] ....

As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?

Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.

My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.

Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?

Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?

How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.

View 3 Replies View Related

Fedora Installation :: Dell Partitions - Trying To Dual Boot With Vista

Aug 24, 2011

Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:

50MB for Dell Diagnostics
**GB main vista partition
10GB recovery partition
2.5GB MediaDirect partition

I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.

View 2 Replies View Related

Ubuntu Installation :: Repartition Hard Disc - Combine Two Unallocated Partitions To Install Windows 7 Dual Boot

Jul 28, 2010

I would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?

View 1 Replies View Related

Fedora Installation :: Dual Boot Vista - No Hard Drives Or Partitions Are Shown

Feb 9, 2009

i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.

i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .

View 9 Replies View Related

Ubuntu Installation :: Dual Boot - Two Identical Windows Partitions - Sda2 Sda2?

Mar 26, 2011

I just successfully installed ubuntu 10.10 Meerkat Maverik parallel to manufacturer installed Windows 7 Professional on a newly bought ThinkPad t410. All works find just that on the boot screen instead of 1 Windows partition (usually something like "Windows 7 loader on sda1") I find two Windows partitions. Now, I know that Thinkpads have a recovery partition. Funny is though that both "Windows 7 loader on sda1/2" login to what seems the identical Windows (not one of them the "normal" and the other some form of a recovery).

View 1 Replies View Related

Ubuntu :: 9.10 Dual Boot With XP - How To Remove Partitions

Mar 28, 2010

I am running Ubuntu 9.10 dual boot with Windows XP, on my 120GB hard drive I currently have the following partitions

a) 42GB - with WindowsXP installed
b) 10GB - for WindowsXP storage
c) 3.1GB - accidentally made when installing Ubuntu
d) 62GB - With Ubuntu installed
e) 2.7GB - swap space for ubuntu

I very rarely use WinXP and have nothing on b or c, so my question is can I get rid of those partitions to make d 75GB total without having to reinstall Ubuntu?

View 5 Replies View Related

Ubuntu :: 10.04 - No Dual Boot Option For Both Partitions

Jul 3, 2010

I was running Ubuntu 10.04 as my only OS. I then booted from the Ubuntu CD and divided my HD into two partitions, one for my Ubuntu and the other I formatted to NTFS so I could load Windows. I booted from the Windows CD and installed Windows on the second partition. I am now unable to boot into Ubuntu and I do not have a boot menu at start-up to choose what OS I want. I went back in with my Ubuntu CD and selected the "bootable" option for both partitions through Disk Utility but it still boots only to Windows. If I change the Linux partition to "bootable" and deselect that option from the NTFS partition, my computer starts up and then give the error, "No operating system present." What do I have to do in order to have a boot menu show up that will allow me to choose what OS to use at start-up?

View 3 Replies View Related

Ubuntu :: How To Get Rid Of Dual Boot Screen And Partitions

Jan 24, 2011

My brother installed ubuntu earlier this year, ended up not liking it, and somehow managed to delete all the Ubuntu folders from Windows XP without deleting neither the partition nor GRUB (which is what I'm assuming is keeping up the dual boot screens).

Info:
Dual boot - windows xp (SP3) and ubuntu
Laptop - Dell Vostro 1510

How do I get rid of the dual boot screen? AND how do I get rid of the partitions? I already tried to run Mbr fixer, but it hasn't worked. When I boot from the Windows XP CD I have, the recovery console doesn't detect the hard drive and therefore can't repair windows. I have the latest version of Kubuntu on hand - will installing this alongside or inside Windows XP wipe out the Ubuntu partitions or will it just create more partitions in the disk?

View 5 Replies View Related

Ubuntu :: Dual Boot, Sharing Files On Different Partitions?

Jun 28, 2010

Setting up an old machine for some family members that are not so tech savvy. It will dual boot Windows XP and Ubuntu 10.04. The partitioning is as follows:

sda1 12 Gb ntfs WinXP
sda2 ----- ---- Extended
sda3 10 Gb ext4 Ubuntu

[code]....

View 3 Replies View Related

Ubuntu :: Windows XP / Dual Boot - Resize Two Different Partitions?

Jan 6, 2011

I am running a dual boot with XP and Ubuntu - what I want to do is increase the partition size of Ubuntu and reduce XP. When I run " G Parted" it shows both partitions with Xp being NTFS. I guess the boot loader is Grub because Ubuntu takes priority at Boot. I cannot persuade G Parted to allow me to resize the two different partitions. I am using the G Parted Live CD.

View 1 Replies View Related

General :: After Intalling 13.1, Machine Wont Boot?

Aug 13, 2010

I installed SW 13.1. Install and config completed without issue. When I attempt to boot, POST completes, and bootup stalls. Only a blinking cursor is visible. Any pointers on how to resolve this/achieve a succesfull bootup?

View 4 Replies View Related

Fedora Installation :: Installation Success But No Boot Nor Grub Menu

Mar 18, 2011

I installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.

I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.

View 1 Replies View Related

Slackware :: How To Dual Boot 2 Partitions

Apr 22, 2011

Slackware 13.0 32-bit is installed on /dev/sda5 with lilo written to that partition. Everything works and I have a nice lilo boot menu (for a WinXP bootable partion). Recently I installed Slack 13.0 64-bit on /dev/sdb5. This also succeeded (apparently). After reboot I was presented with my old boot menu, selected the 32-bit Linux option (/dev/sda5) and after login went to /etc/lilo.conf where I entered a boot stanza for /dev/sdb5 (64-bit linux), and then ran /sbin/lilo. No errors flagged. After reboot there was a 64-bit entry in the boot menu, but when selected it led to kernel panic. Further although I can mount /dev/sdb5 from the 32-bit partition there is nothing in it except lost+found.

So the current position is that I can't access my 64-bit linux partition (/dev/sdb5) to change anything in it (even boot: root=/dev/sdb5 at the boot prompt doesn't seem to work).how do I obtain access to /dev/sdb5? Second question is what items do I need in the 32-bit lilo.conf boot stanza so as to be able to boot to that 64 linux partition?

PS: OK I noticed one warning when I ran lilo.....

bash-3.1# lilo
Warning: LBA32 addressing assumed
Added Slack *
Added Slack64

[code]....

Maybe the problem is with the 32-bit addressing? How do I get lilo to use LBA32 for the 32-bit partition (/dev/sda5) and LBA64 addressing for the 64-bit partition (/dev/sdb5)?

View 5 Replies View Related

Ubuntu Installation :: Intalling Build-essential ?

May 14, 2011

I tried this command:

And got these lines:

Why the package not found.

View 6 Replies View Related

General :: Disk Partitions For Dual Boot With Windows 7 GPT/EFI

Jan 9, 2011

I have a Centos 5.5 system that had 2 primary partitions (2nd is setup as LVM with multiple LVM partitions) and then installed Windows 7 as Dual Boot.

However, Windows 7 has installed a 200MB system partition which is GPT/EFI as partition 3 and the Win7 OS as a Primary Partition.

I have a heap of space undefined after this fourth primary partition.

However, as 4 primary partitions have been used, I can no longer create an extended partition to utilise this.

As such I would like to know what is the best and safest way to proceed, and if possible step by steps instructions for the best option eg:

1. Delete the Windows 7 System Partition and create the extended partition (I expect this will prevent Windows from booting)

2. Use something like partition magic to change the Win 7 OS Partition 4 to an extended partition (Not sure if this will work)

3. Make changes to the overall system including both Linux and Windows so that it will use GPT only (I have
had no experience with GPT so this is a bit scary)

4. Other?

View 2 Replies View Related

Ubuntu Multimedia :: Dual Monitors + Compositing - Any Success Stories?

Jun 3, 2010

I've just upgraded to 10.04 and even if I am able to use my two displays with my Nvidia GPU, it bugs me that I can't use basic transparency controls on my desktop (compositing in Xfce). I've searched all over google and most links say it's impossible to mix Xinerama with Compositing, while others suggest using the old Xgl implementation will do the trick. I've also read things about Xrandr and that it might be a substitute for Xinerama, but it seems Nvidia drivers doesn't support it.

So, basically, I am at the end of my wits and I wanted to ask (shout?) if anyone managed to: 1. use two displays as part of the same desktop AND use compositing (window transparency) 2. or hack the compositing feature to work with some sort of software acceleration instead of hardware acceleration

Google lists all sorts of solutions, but none conclusive. So, is there a way out of this problem, maybe by using nouveau, or Xrandr, or something else entirely?

View 9 Replies View Related

OpenSUSE Install :: Syncing GPT / MBR Partitions Tables On OS-X And Dual Boot

May 30, 2011

I've been successfully dualbooting OS-X and various debian based linux distros for a while now on my macbook pro. I use rEFIt. gptsync gives me the following error message:

[Code]...

Status: Analysis inconclusive, will not touch this disk. Is there any way to force the partition tables to sync? Currently, I have to use the OpenSUSE live DVD to boot into my OpenSUSE install.

View 2 Replies View Related

General :: Any USB Tool To Recover Partitions In Dual Boot System?

May 23, 2011

I have a dual boot Acer Aspire One, after reinstalling Windows back to "original factory", the way it was straight out of the box, it now will not boot up at all. It goes to the Windows start screen goes blank, and loops there infinitely. Is there a USB tool I can use to figure out what went wrong and recover either my Windows or Linux partition with out having to do a complete reinstall?

View 1 Replies View Related

General :: Upsize Partitions On New HDD - Dual Boot (11.04 On Win7 With Grub)

Aug 12, 2011

I have been an MCSA for the last 20 years, but recently I have been very impressed indeed with Ubuntu 11.04, having dabbled with and then discarded Susi Linux some five years ago. My problem may be summarised as outlined below: Using the downloadable ISO I installed Ubuntu 11.04 as a dual boot on a Win7 100GB HDD on my Lenovo T61 laptop. No problem they both rock and I'm very impressed. During the installation procedure I selected the largest partition sizes available from the Ubuntu installer wizard being 25GB Extended split into 18GB Ext4, and 3.2GB and 3.2 GB swaps (I couldn't suss out any way of manually increasing them any further).

I found that the 11.04 Startup Manager application didn't work at all, so I downloaded and installed Grub Customizer 2.1..and that did work after a fashion.. certainly enough to actually effect changes in the grub configuration settings. Everything worked so well on the 100GB HDD that I decided to transpose the entire disk image to a new 500GB WD Scorpio and make the dual boot my main working disk. Using Acronis I imaged off the 100GB installation selecting the partition by partition, and retain disk signature options. I then recovered the image to the new 500GB HDD and everything works beautifully on the new HDD.

Except of course all the partitions are still the same size. I won't waste your reading time recounting everything that I have done using Acronis Disk Director (V Good) and Gparted (not so good), but needless to say whatever I do Grub won't have it, and I have lost count of the times that I have re-recovered the good image. Basically I want to increase the partion sizes to apportion larger partitions to both Win 7 and 11.04 and obviously I'm missing something somewhere.

Fdisk -l -u produces..
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9f011ed1 .....

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved