Ubuntu Installation :: Intalling Build-essential ?
May 14, 2011I tried this command:
And got these lines:
Why the package not found.
ADVERTISEMENT
Ubuntu Installation :: Installing Build-Essential With No Connection / CDROM
Mar 27, 2010I'm having headaches about not being able to install build-essential on my 9.10. I don't have an internet connection and no CDrom. [URL]. So that solves it if you have a CD drive... What to do if a poor fella (like me) was to have a system with no CD drive? I installed from USB PENDRIVE and I suppose there have to be some command corresponding to apt-cdrom but for the USB drive but I can't find one.
View 3 Replies View RelatedUbuntu Installation :: Build Essential But Make Command Not Working
Dec 14, 2010I have build-essential, but make command not working I have build-essential package, but there is still a problem with make command. When I run it in a directory, it shows following message: mudassar@javaDev-1:~/Desktop/gwget-0.99$ make make: *** No targets specified and no makefile found. Stop. When I explicitly specify a make file, the following message appears:
[Code].....
Ubuntu Installation :: Build-Essential Package Missing / Obsoleted
Jun 20, 2011Today is my first day to use ubuntu for my C++ programming. However, when I was trying to install build-essential, it failed. This is the output shown:
vie@vie-laptop:~/TestC++$ sudo apt-get install build-essential
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package build-essential is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package build-essential has no installation candidate
vie@vie-laptop:~/TestC++$ .....
Ubuntu Installation :: Build-essential Installation In Secluded Environment
Sep 1, 2011I have been trying to install build-essential package on Ubuntu-11.x in the production environment, which is not connected through Internet. When I run apt-get install command, it gives me errors such as:
Depends: libc6-dev but it is not installable
Depends: gcc but it is not installable and so on
I have checked these packages through "dpkg get-selections" command and i believe that they are already installed (probably virtual packages) in the system. Please let me know the quick way to complete this installation.
Ubuntu :: Where Can I Download Build-essential?
Apr 23, 2011i need build-essential on a netbook that can't connect to the Internet (fail.. .) ). But i can't just type in apt-get build-essential because...you get the point. So, do I have a chance to find build-essential on some website, in .rpm form or something like that?
View 2 Replies View RelatedUbuntu :: Virtual Box - How To Install The Build-essential
May 3, 2010I installed ubuntu on my laptop as virtualbox application. I have tried to install build-essential like that command:
Code:
sudo apt-get install build-essential
If i do, i got the following message:
Code:
Media change: insert the disc labeled 'Ubuntu 9.04 _Jaunty Jackalope_ - Release i386 (20090420.1)' in the drive '/cdrom/' and press enter.If i insert the disc with the ubuntu-image and press enter, i see this message every time i press enter.I looked in my Places folder, i saw my disc with the Label "Ubuntu 9.04 i386".
General :: Can't Install Build-essential On Ubuntu Jaunty 9.04?
May 31, 2011Here's my /etc/apt/sources.list:
#deb cdrom:[Ubuntu 9.04 _Jaunty Jackalope_ - Release i386 (20090420.1)]/ jaunty main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://us.archive.ubuntu.com/ubuntu/ jaunty main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ jaunty main restricted
[Code]...
Ubuntu :: Installing Build-essential On 3 Year Old Desktop 8.04?
Apr 16, 2011I want to start some C++ development on my 3 year old, un-updated 8.04 ubuntu desktop machine. I tried,sudo apt-get install build-essentialand got,
Code:
sudo apt-get install build-essential
Reading package lists... Done
[code].....
Software :: Installing Build Essential On Old Ubuntu Desktop 8.04
Apr 16, 2011I want to start some C++ development on my 3 year old, un-updated 8.04 ubuntu desktop machine. I tried:
sudo apt-get install build-essential
and got,
Code:
sudo apt-get install build-essential
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help resolve the situation:
The following packages have unmet dependencies:
libc6-i386: Breaks: ia32-libs (< 20090804) but 2.2ubuntu11 is to be installed
Breaks: lib32asound2 (< 1.0.20-3) but 1.0.15-3ubuntu4 is to be installed
E: Broken packages
I thought apt would automatically install the package dependencies. I don't really want to update the entire installation as I have a lot of network services installed and running which I don't want to risk breaking. They aren't exposed to the internet and don't pose a security risk. So is there any way to get apt to install the dependencies for build-essential?
Debian :: How To Install "build-essential" Without Internet Or CD-ROM
Sep 2, 2011I have a problem when I was installing the build-essential package.
I have a machine which is an embedded system with only 512M Flash and 128M RAM, the CPU is Atom N455. These hard wares have been designed in a very compact style and assembled in a very tiny case without CD/DVD ROM driver and internet access(it has a 100M Ethernet port, but due to security rules, it can not be connected to internet).
Here is the question: I have already installed the minimum system on it with the "network install" ISO image. It took me about 280M out of the 512M Flash.now I want to install the build-essential package on this machine. There are a lot of limitations:
1, I can not use the CD/DVD ROM
2, I can not use the Internet access
3, there are only about 200M storage space left for me, so I can not copy the whole "debian-6.0.2.1-i386-CD-1.iso" image file into it (this image is about 640M).
4, I also do not have any external CD/DVD Driver, Mobile HDD Driver, USB Ethernet etc. (I am in a remote area in Western China, I connect my laptop to internet via 56k Modem, there is no computer market, the express courier is also not available in this place.)
What I have now at my hand is a 512M USB disk, my laptop and the phone line.
I have searched a lot of solutions on internet, but none of them seems feasible for me. I have tried to install a similar system by using the "network install" ISO on VMware virtual machine. I have done the "apt-get install build-essential" on the VMware Machine and get all the .deb packages in /var/cached/apt/archives, they are as following:
Volume in drive Z has no label.
Volume Serial Number is 8C85-5ECD
Directory of Z:DEBS
[.]
[..]
build-essential_11.5_i386.deb
bzip2_1.0.5-6_i386.deb
cpp_4%3a4.4.5-1_i386.deb
cpp-4.4_4.4.5-8_i386.deb
dpkg-dev_1.15.8.11_all.deb
[Code].....
Ubuntu Installation :: Dual Boot With XP - 4 Different Partitions - No Success Intalling Ubuntu 10.10?
Nov 22, 2010For the past 4 days Ive been trying to install ubuntu 10.10 64bit with no success. I am a total newbee when it comes to linux so I will be needing your kind help with it.At first I installed ubuntu to one of my portable drives with no problems, but now I want to install it to my hard drive and have a dual boot between windows XP and Ubuntu.
When I arrive to the manual partitioning part is where I get lost. I have totally destroyed my windows installation 5 times already ( thank god for norton ghost for restoring my windows installation. )
I have read several articles and blog posts regarding a dual boot system with windows and Ubuntu but none of them cover my specific situation so I keep getting lost and screwing things up.
[Code]...
Ubuntu Installation :: Partitioning HP Drive To Save Essential Files?
Mar 13, 2010I have a customers' HP laptop that I've been doing work on. The HP came with Vista Home Premium pre-installed and the system was infected with the insidious Vista Antivirus 2010 virus.Well, after doing some registry cleaning I was able to get rid of that virus, but I suggested to the customers to check out Ubuntu, which they agreed to do.Here's my problem:
The HP has a recovery drive, which I formatted to make room for some of the pictures, documents and music they wanted to retain.I'm in the process of installing Ubuntu 9.10 and don't want to erase the recovery partition D:, which is labeled as /dev/sda2in the prepare disk space portion of the setup.I've moved to specify partition manually, but I'm uncertain as to how to configure this. When I installed Ubuntu on my own system, I just deleted Windows and used the entire disk space, so this is something new to me
Ubuntu Installation :: Western Digital MyBook Essential 2TB Does Not Mount?
Jun 10, 2010Ubuntu 10.04 LTS on VirtualBoxVM
Western Digital MyBook Essential 2TB USB
Want to format and partition the external hard drive for USB storage for DD WRT (i.e. into ext3)The drive is MS-DOS (FAT32) - Using Disk Utility (MAC) i erased what was on the drive.It mounts properly and can be accessed on the Mac OS.Upon plugging the USB into the Mac, the drive does not show on the Ubuntu desktop.Under the USB icon (bottom right) it indicates no USB devices attached however the "Western Digital My Book [0175]" is greyed out.
Going "Places" > "Computer" Only "File System" visible.
GParted - Drive not visible (only /dev/sda)
Using the sudo fdisk -l:
Disk /dev/sda: 3221 MB, 3221225472 bytes[code]...
Ubuntu Installation :: Dell Inspiron Missing Essential Desktop Icons?
Mar 9, 2011A friend of mine, who doesnt understand computers at all, had a virus on her Dell Inspiron 6000 (2-GHz Pentium M processor, 1GB of DDR400 DRAM) laptop. She was unable to boot it up.
So i advised her to boot up Ubuntu 10.10 netbook edition. I was instructing her over emesene, so it was quite difficult at times, however, she complained that when she loaded up and went through all the instructions as per the netbook "how to", she only got a purple screen.
After a while, we managed to get her to the actual ubuntu screen, however the icons down the left hand side were all missing. I have a feeling this is something to do with the Graphics Processor: integrated Intel GMA 900 graphics, or ATI Mobility Radeon X300.
I asked her to try and get online but she couldnt so i asked her to find the drivers for her network card and she couldn't find them.
I then asked her to update drivers but they wouldnt update and no drivers were found.
I really want her to get up and running with ubuntu and convert her, but its really frustrating, not getting her online and up and running. But she wants to load XP professional.
Ubuntu Networking :: Walkthrough For Intalling A Driver That Is In Tar.gz?
Mar 11, 2011I've got a linux driver for by Broadcom 802.11 wireless card which I downloaded from the broadcom website. It's in a tar.gz format and I have NO idea what to do with that. My ubuntu machine has no internet access at all so none of the solutions I'v been able to find that deal with these broadcom drivers will work for me (because they all seem to require internet).
So, maybe someone could point me to a walkthrough for intalling a driver that is in tar.gz?
Debian :: Intalling The RTLinux-3.2-wr On 5.0.4?
Jul 27, 2010My computer has Debian 5.0.4 (with kernel linux-2.6.26-2-AMD) installed. Processor is AMD64 athlon dual-core CPU. I am trying to install RTLinux-3.2-wr. Below is what I did:
1) download a clean kernel : linux-2.6.26.8.tar.gz and patch : patch-2.6.26.8-rt16.gz
2) configure and build the kernel with the patch applied
3) reboot with the new kernel
"uname -r" shows "2.6.26.8-rt16"
4) download and unpack RTLinux-3.2-wr.tar.bz2 into /usr/src/rtlinux-3.2-wr, the execute the following commands:
cd /usr/src/rtlinux-3.2-wr
make menuconfig
I get an error message "Makefile: 66: schedulers/x86/Makefile: No such file or directory", which is caused by line 66 "include schedulers/$(ARCH)/Makefile" in file /usr/src/rtlinux-3.2-wr/Makefile. When I go to directory "/usr/src/rtlinux-3.2-wr/schedulers", I find that there is no "x86" subfolder. The existing four subfolders are "alpha", "i386", "ppc" and "mips" respectively. What should I do to "make menuconfig" successfully?
General :: How To Fix Lilo After Intalling Windows
Aug 3, 2010I have slackware one one partition with lilo. Today I've installed Windows 7 on another partition and now I have to fix lilo. How can I do that? Can I reinstall it from the slackdvd ?
View 1 Replies View RelatedGeneral :: After Intalling 13.1, Machine Wont Boot?
Aug 13, 2010I installed SW 13.1. Install and config completed without issue. When I attempt to boot, POST completes, and bootup stalls. Only a blinking cursor is visible. Any pointers on how to resolve this/achieve a succesfull bootup?
View 4 Replies View RelatedUbuntu :: What Are The Essential Programs / Packages
Feb 11, 2011what are some essential programs/packages that you would suggest?
View 5 Replies View RelatedUbuntu :: Is Swap Partition Essential
Jun 11, 2011If a computer has enough ram, say 2gb, is swap partition necessary? Will ubuntu run if swap partition is deleted?
View 9 Replies View RelatedUbuntu Security :: Script Running As A Special Build User Which Performs An Automated Build That Fails With (Too Many Open Files)?
Feb 11, 2011I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
OpenSUSE :: Find All The Build-deps Or What They Are For That Matter To Build Boxee
Feb 20, 2010I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:
1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.
2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.
What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.
OpenSUSE :: Build Libevent-dev 2.0.10 In Ooder To Build New Version Of Transmission?
Feb 16, 2011looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies View RelatedSoftware :: Self Build Rpm Fails With Missing Dependencies On Build Host?
Sep 24, 2009as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
Ubuntu :: Turn On The Light Indicator Of With Book Essential?
Jun 25, 2010I am new to ubuntu and i'm loving it. I just cant figure out how the lights on my external hd lit up. in windows,if i install the smartware software, the lights will start to lit up to indicate the drive's capacity. now that i've switched to ubuntu. i can never make it to work
View 1 Replies View RelatedUbuntu :: Live Hanging On Loading Essential Drivers?
Jun 21, 2010I'm trying to recover files from a desktop PC which has 4 HD running on a RAID (0+1) set-up. Now it would appear that either Vista Raid has failed (which I think will be the issue) or one or more of the HD partions has become corrupt. So, I have installed Ubuntu Live on USB and have succesfully booted; however, Ubuntu does not appearing to be loading as it is stuck on "loading essential drivers".
View 1 Replies View RelatedSlackware :: Install The I386 Build On One Partition And The 64-bit Build On Another
Sep 16, 2010Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
Hardware :: Unlocking The Passport Essential SE?
Aug 25, 2010Do you think it is possible to unlock the hard drive in Linux? I like the idea of password protecting my files, just wish I could unlock the files in Linux.
View 1 Replies View RelatedSoftware :: Can't Install Essential Libraries For Ns2.34
Feb 27, 2010I need to install ns-allinone-2.34(network simulator v. 2.34) on my Ubuntu OS. I searched the web and found some useful sites describing the installation steps.they say that before installing ns2 I need to install some essential libraries using the command below
$ sudo apt-get build-essential autoconf automake libxmu-dev
while executing this command I am getting the following error
E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
I don't even know what this command refers to. Please help me in understanding this command and also tell how to rectify the error as i need this software for my course as well as for my project on Ad Hoc networks.
