Ubuntu Installation :: Cloned 10.10 Won't Boot?
May 2, 2011
I have 10.10 on an old 60GB hard disk in an external USB caddy so I can boot off this when I want to instead of Windows on the internal laptop hard disk. This works well, and has done for some time.
I recently got a 1TB portable USB drive and thought it would be cool to reserve the 1st 60GB for a clone of the 10.10 system and use that instead. So I set up 2 partitions exactly like the 2 partitions on my old disk (not forgetting the boot flag) and copied the contents with dd. I also used dd to copy the boot sector excluding the partition table (dd if= of= bs=446 count=1; dd if= of= bs=512 skip=1 seek=1 count=2047).
View 1 Replies
ADVERTISEMENT
Feb 2, 2010
I have a hp laptop with two internal drives and I also have a large USB drive. When I boot normally the internal boot drive is /dev/sda, the second internal drive is /dev/sdb, and the USB drive is /dev/sdc. I used Acronis True image to clone the internal boot drive onto the USB drive. I would like to be able to boot the Fedora 12 instance on the USB drive but do not seem to be having much luck... Here is what I have tried so far... The following is an entry in grub.conf
title Fedora (2.6.31.12-174.2.3.fc12.i686.PAE)
root (hd0,5)
kernel /boot/vmlinuz-2.6.31.12-174.2.3.fc12.i686.PAE ro root=UUID=101b1556-d097-4d85-9bc5-fac2f9abe5d8 LANG=en_US.UTF-8
[code].....
and tried to boot....Got a no such device error.While in grub I tried the grub command setup (hd2) and then got in the bios and set the boot order to USB drive before internal drive.In this case a reboot does nothing I just get a flashing cursor, grub is not entered.
View 1 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
Jan 28, 2010
I work in a library and want to set up several newer PCs. I cloned a HD containing Ubuntu 9.10 using Clonezilla. When I put the HD in another computer (exactly the same as the one on which I did the cloning) it will not boot.
After pressing the power button, it proceeds as follows:
BIOS loads "Grub Loading" appears on screen for several seconds Ubuntu icon appears for several seconds Icon disappears and then nothing, blank screen
Regarding Clonezilla, I used the advanced screens but chose only the default settings.
Also, if I boot to the Clonezilla CD on the cloned computer, I can choose the HD and the OS loads without a problem.
View 6 Replies
View Related
Jun 6, 2010
I had cloned my 250 GB HD to a new 1 TB HD using 'dd'. After that Ubuntu does not login. The MBR [Grub] and Windows 7 do start without any problem and all the programs are working perfect under it. When I boot to Ubuntu, the login screen just keeps displaying 'Automatically logging in...'. On the first boot from the cloned HD, Ubuntu displayed that the /home is not found and offered Check/Skip/Ignore and I selected Check. After that the message is not shown. Another weird thing is that at logon, the system does a log off and display a warning that the Power Manager Applet is not responding and asks for Log off anyway.
I have the old HDD intact with me.
View 9 Replies
View Related
Aug 18, 2010
I've been searching around and from what I've found this is supposed to just work but I am having some display issues when cloning my laptop to an external monitor. I think the problem is that my laptop has a better resolution than the monitor. Here is my setup:
laptop with a display of 1900x1200
external monitor with a display of 1680x1050
ideally I want to clone the laptops output onto the external monitor so they can both operate in their native resolution. When I setup twinview and set it to clone the laptop displays correctly, however, the external monitor is missing a large chunk on the bottom and right hand side
here's my xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
[Code].....
View 1 Replies
View Related
Jan 7, 2010
I have an MSI Wind with Windows, Ubuntu Netbook Remix and another Ubuntu derivative installed on my 80gb drive. I recently acquired a 160gb drive, which I plan to put into the Wind. I cloned the 80gb drive, which left me with an identical configuration, plus 80gb of unallocated free space. The problem is that I already have 4 primary partitions; the last of them (adjacent to the free space) is divided up into 4 extended partitions. I tried to make the free space available in gparted, but it won't let me create a new partition because I already have 4 primaries. Is there some way I can get this into the last primary partition? I tried expanding the size of the extended partitions in the 4th primary partition, but gparted won't let me do this.
View 5 Replies
View Related
Apr 7, 2011
I have a strange problem. I have to clone my MAC address (and specify a different MAC address) to get internet. Without the new MAC address I get an IP address but no internet. This happened with my old (updated from 7.04 -> 10.10) OS installation and with a new, clean install of 11.04. So I have a workaround. But I don't know what the problem is.
Ps. I recently switch modem and router. And I had the problem with old and new modem/router combinations.
View 7 Replies
View Related
Jun 4, 2015
I'm having trouble with Debian 8 and using my dual monitor setup. Whenever I install a desktop that uses lightdm as a display manager (XFCE, MATE, Cinnamon) the login screen is cloning the two monitors rather then extending the desktop. I don't have the issue with gnome 3 (gdm) or kde (kdm). I tried installing Slim as well, but that has the same cloning issue.
I had a similar issue with g the XFCE environment, but I was able to resolve it by installing arandr and configuring the monitor layout. Upgrading from Stable to Testing also fixed the XFCE issue with the newest version of XFCE. Unfortunately I still have the display manager issue (lightdm/slim) in Testing as well. I would prefer to use XFCE but I'm willing to move to Gnome 3/KDE if need be to resolve the issue with the login screen.
View 3 Replies
View Related
Aug 4, 2011
I made a clone of my ordinary disk with Clonezilla some times ago. Now I want to access some files on that cloned disk. Since the cloned disk also has a LVM structure I don't know how to mount it. When I connect the cloned disk I can see both /dev/sdb1 & sdb2. vgdisplay -v gives me:
[Code]...
View 2 Replies
View Related
May 8, 2010
I'm trying to span my desktop across my 2 displays. I tried to edit xorg.conf-vesa to no avail.
Here is xrandr:
bash-3.1$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1600
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.0*+
1680x1050 59.9
[code]....
I have attached a portion of xorg.conf-vesa and xrandr --verbose.
View 14 Replies
View Related
Jun 16, 2011
Im running Squeeze (in VirtualBox on a Win host), and I need to clone my drive to a bigger one and boot from that drive. I used gparted from a live cd for the cloning, and got the following result with fdisk -l:
Disk /dev/sda: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
View 1 Replies
View Related
Dec 22, 2010
I recently used clonezilla to make a backup image of hdd, before doing factory restore, now the image is of not necessary as I can image the restored computer (Acer Aspire 3620).Is it possible to extract image to blu-ray and make bootable as in live-cd?
View 8 Replies
View Related
Feb 23, 2010
I have cloned an embedded system that runs Opensuse 11 x86 using dd. The embedded system uses a simple serial device, by writing to the relevant device file (/dev/ttyS2, usually). Curiously, when I write to the same serial device on the newly cloned system (which, incidentally, has almost identical hardware), thusly:
echo hello > /dev/ttyS2 the command blocks for up to a minute, before finally returning without making the hardware do anything. I can boot into Opensuse's rescue system on the clone and successfully do exactly the same thing, as I can when I boot the original's "identical" operating system. Why might this problem occur? What can I do about it?
View 2 Replies
View Related
May 15, 2010
Simple question, which implies lot of complexity, unfortunately : how to install Clonezilla and mount multi-partitions cloned image disk under DEBIAN ?
Wishing that one day Linux would be so easy and complete as Windows. But we are gaining more users, so Linux will have more apps
View 5 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
Aug 11, 2010
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
View 9 Replies
View Related
Jan 18, 2010
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
View 9 Replies
View Related
Mar 7, 2010
I'm running 9.10 off of a 4 GiB CF card. I keep running into space issues with updates, so I purchased an 8 GiB replacement card. I've cloned the 4 GiB card to a .IMG file using DD.I've then copied the 4 GiB image back to the 8 GiB card using the Ubuntu startup disk creator program. Once done, I'm able to properly boot off of the new 8 GiB clone.Unfortunately, the clone ends up with 3.67 GiB of unallocated space at the end *see attached). I tried deleting the "extended" partition that the swap is located at after booting from a Live CD and the system was unable to boot after this. I was thinking that I would delete the swap entirely and create a swap file after I merged the existing partitions, but I was unable to do this.
best way to do this (e.g. get one large 8 GiB partition with my old image on it)? I still have the original untouched 4 GiB card and also have an external CF drive if I need to redo the cloning. I've also used Clonezilla before, so perhaps there's a way to do this that allow me to grow the image as it's being cloned.
View 1 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
Feb 10, 2010
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
View 2 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
May 19, 2010
Installed ubuntu 10.4 over previous ubuntu on Intel 945G. After installation and reboot the system does not boot: "no bootable device - insert boot disk and press any key".
Installation was done from USB-stick, prepared by UNETBOOTin. I have two HD's, one used for system + storage, another one just for storage. I manually deleted previous system partitions of previous ubuntu install in system HD. The system HD had about 1/3 of free and unallocated space for system partitions, which ubuntu installer created during the installation.
I tried to reinstall grub from bootable USB-stick and it succeeded but it did not help. The system is still not bootable.
I have used ubuntu for years and never happened something like this. Am I missing something or is ubuntu missing something???
HW failure is ofcourse possible but I am quite skeptical about it because Live ubuntu from USB-stick works well.
View 9 Replies
View Related
Aug 30, 2010
I'm trying to install Ubuntu on a computer with Vista SP2, my BIOS supports booting from a USB drive. Ive used unetbootin and Universal USB installer to setup the ISO on the drive, as well as trying Ubuntu version 10.04 and 9.10. The problem is that during the boot it stops at a line reading "SYSLINUX 3.86 2010-04-01 CBIOS Copyright ...", no error messages, it doesn't appear to be frozen as there is a blinking cursor under this line. The boot performs normally up to this point, it happens when, during a normal boot to vista, it says "boot from CD/DVD" then loads windows.It shouldn't be a hardware issue, the computer is pretty new, and I had an older version of Ubuntu install on it temporarily.
View 1 Replies
View Related
Sep 1, 2010
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies
View Related
Sep 4, 2010
I installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
View 1 Replies
View Related
