Debian Multimedia :: Evolution Crashing With Exchange Plugin
Feb 11, 2011
Running it from a terminal, every few minutes this happens:(evolution:25607): libsoup-CRITICAL **: set_ current_request: assertion `priv->cur_req == NULL' failed Segmentation fault..Found lots of cases that mention Gentoo (and Evolution 2.4) and this bug, but nothing with Debian. Bug is apparently due to the version of libsoup that Evolution is compiled against.Install is relatively fresh; about a day old. Packages are the latest updates.
View 1 Replies
ADVERTISEMENT
Mar 22, 2011
I am running the testing version and am fully up to date. When I try to run evolution, I get the following errors in a terminal. When I launch it normally, I don't see any messages, it just never loads.
$ evolution code...
What can I do to debug this and get it working again?
View 3 Replies
View Related
Aug 5, 2015
Evolution keeps crashing everytime I send mail. I am also constantly asked for my keyring or email passwords. I checked the log and found this error message.
"CRITICAL **: mail_session_refresh_cb: assertion 'service != NULL' failed"
This message was in a bug report from 2013 that seems to be closed.: https://bugs.debian.org/cgi-bin/bugrepo ... bug=730256
My system : Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u2 (2015-07-17)
synaptic package manager says my evolution and keyring are the latest.
I usually run Xfce if that means anything.
View 1 Replies
View Related
Nov 25, 2010
I had decided to give Ubuntu a go on my work notebook. At work we use Exchange 2003 (at the moment) for email. I had open Evolution and tried to configure it. I got the welcome screen (wizzard), I clicked Forward and then I skipped Restore from backup (since this is a new install) and clicked Forward. It asked for identity and I gave the details (as shown in the first screenshot) then hit Forward and made the necesary settings as shown in the second screenshot. Then I click Authenticate and it asks for my exchange password. i type it and then it gives me the error "Could not locate server.". I am sure the server name is correct and I am sure it resolves correctly (tried it with firefox and works just fine). I also tried username as follows:
user@DOMAIN.RO
DOMAINuser
View 5 Replies
View Related
Jan 16, 2011
I am trying to set up my school e-mail in evolution. They use exchange 2007. When I set it up on my iPod touch, it wouldn't work unless I put in my exchange domain. Where would I put that in evolution?
View 1 Replies
View Related
Apr 17, 2011
I 've got an hotmail (live-mail) account, that I'm using on my iPod with Microsoft Exchange. This is really working fine, so I was very happy when I read, that you can use this feature with Evolution Mail.
Now my Problem is, that the Settings I use on my iPod won't work with Evolution.
I think the Problem is the OWA URL cause whatever I do it can't connect to this Server.
I'll give you the Settings, that work on my iPod:
E-Mail: xxx@hotmail.de
Server: m.hotmail.com
User-Name: xxx@hotmail.de
Password: xxx
SSL: ON
Does anybody know the OWA URL of the Hotmail-Server or does every Account have one of it's own?
View 6 Replies
View Related
Feb 12, 2010
I use web-browser and and url to get my mail from company's mail server.
Code:
[URL]
Can I configure evolution to fetch my mail?
View 1 Replies
View Related
Apr 2, 2010
Are they compatible? Can I use Evolution as client for MS Exchange?
View 1 Replies
View Related
Jul 29, 2010
I've got an Ubuntu 10.04 system running Evolution, and I'm trying to integrate it with a slightly older Exchange server. I got the basics all working, email, calendaring, etc. The trouble I'm having is that it crashes pretty frequently, and even using the DavMail tool doesn't help. DavMail just ends up crashing instead!
It seems to me that there is some piece of integration that is broken, or just not set up right. Has anyone seen this? Where it "works", but is very unstable? We've got a few people at my office with this issue on a couple different distros.
View 4 Replies
View Related
Nov 5, 2010
Is there an evolution exchange mapi (rpm) that is available for CentOS 5? I have a client that has an Exchange Server 2010 server,but wants to use a Linux Centos laptop. I was able to see this MAPI in on another Linux distro.
View 1 Replies
View Related
Jul 27, 2010
I seem to have a problem that a lot of people have: My work uses exchange server 5.5/2007. Does evolution still not support this? I tried to set it up and it tells me that it won't work with exchange 5.5.
View 4 Replies
View Related
Mar 21, 2011
I have some messages that will show briefly then disappear.
I believe the ones that disapear are addressed to suppport rather than directly to me
my Outlook on my windows box still show's the messages along with OWA
There are no filter's applied
View 6 Replies
View Related
Mar 25, 2011
I have just setup evolution to pull in my exchange emails using MAPI. All seems to be well, except that it isn't pulling down my calendar or tasks. I understood that it was supposed to automatically do this, is this correct?We are using exchange 2005 I believe, so wonder if this is specifically the issue.
View 1 Replies
View Related
Mar 30, 2011
Can you recommend an MS exchange client that works reasonably well? Evolution freezes all the time when syncing folders and has many other problems
View 1 Replies
View Related
Mar 19, 2011
i want to configure my MS Exchange server email in Evolution of Fedora. as, Ubuntu 10.10 gives the dropdown for MS exchange server, however in fedora 14 the same is not available.
View 2 Replies
View Related
Oct 6, 2010
I'm experiencing an occasional frustration using Evolution with my work email which is on an MS Exchange 2003 server.Everything usually works well enough, but from time to time I'll try to retrieve a message,Is there a setting I've missed in Evolution that might take care of this, or some other workaround?Let me re-emphasize that the server is a 2003 Exchange server (and a source of endless frustration for a non-windows user). It's not a 2007 or 2010 Exchange server, which is what most companies use these days.
View 2 Replies
View Related
Jul 14, 2011
i have configure exchange server 2010 in evolution Ubuntu 11.04 64 Bit during configuration no Error message, and also i got message "authentication finished successfully" after completed no folder in my account please find my screen short same step i flowed in fedora its working fine all the folder i can able to view
View 1 Replies
View Related
Jan 7, 2009
I am working happily with Fedora 8, evolution chatting happily to exchange 2003, calendar sync the works...impressed. This continued through Fedora 9 (though a little bumpy as all odd numbered Fedora releases are). On to Fedora 10, yes works a treat out of the box (DVD). A couple of updates to evolution later, through yumex (fedora updates), and evolution has stopped sending email to the exchange server. It's also touch and go whether I can read email using OWA.
On pressing 'Send/Receive' evolution pops the error,
Error while performing operation.
Exchange transport can only be used with Exchange mail source.
How could I back out these evolution updates?
View 9 Replies
View Related
Sep 9, 2010
I have F13 x86_64 with all updates. I tried to setup Evolution to access our corporate MS Exchange 2007 server, so I installed evolution-mapi-0.30.3-1.fc13.x86_64 , yum pulled in also dependecies samba4-libs-4.0.0-22.alpha11.fc13.x86_64 and openchange-0.9-2.fc13.x86_64.
Installation went OK, then I tried to setup the account in Evolution. I chose :
server type: Exchange MAPI
server: mailserver.corporatedomain.com
username: my.username
Domain name: corporatedomain.com
Of course, the names of server, domain and my username are different in reality, however, I entered them in the same format as written here. The communication with mailserver is on corporate internal LAN - no routers or firewalls between. When I click "Autheticate" it prompts me for password, I put in the correct password but I get the error: Authentication failed. MapiLogonProvider:MAPI_E_LOGON_FAILED
I tried to put in the IP address of the mailserver instead of its network name, tried to put in the IP of the domain controller, enter the domain name in uppercase, all sorts of combinations but nothing works.
is there a way to get authenitcated??? I googled far and wide, but did not find the cause for Here is the output from evolution when started in gnome-terminal:
(evolution:1606): e-data-server-DEBUG: Loading categories from "/home/user/.evolution/categories.xml"
(evolution:1606): e-data-server-DEBUG: Loaded 31 categories
** (evolution:1606): DEBUG: Loading Exchange MAPI Plugin
** (evolution:1606): DEBUG: MAPI listener is constructed with 0 listed MAPI accounts
e-data-server-ui-Message: Unable to find password(s) in keyring (Keyring reports: No matching results)
e-data-server-ui-Message: Key file does not have group 'Passwords-ExchangeMAPI'
[Code]....
View 2 Replies
View Related
Mar 26, 2010
I cannot receive mail from my POP server; I used the same settings as I previously did with Thunderbird but I keep recieving an error message "La lecture de salutations valides du serveur POP pop.videotron.ca a �chou�" (roughly: exchange with the POP server failed).I am able to connect to the Internet and to other mail accounts with Evolution.
View 1 Replies
View Related
Jun 17, 2010
how to add an extra shared exchange calendar to my account in Evolution.
Evolution adds my own calendar just fine but I don't know how to add the extra one.
I know that in Outlook you can select "Add shared calendar" but I can't find this option in Evolution.
View 3 Replies
View Related
Sep 22, 2010
I use Ubuntu with Evolution here at work, and we have an Exchange server. can I somehow suck up all of the addresses in the global address list and somehow save them locally and import them to Evolution? Since I can't "link" to the global list it would at least be handy for me to utilize locally.
View 3 Replies
View Related
Jan 21, 2011
I have a little problem with Evolution and Exchange 2007. I have managed to connect to the Exchange server without problem using MAPI and I can access my emails fine.
The only problem I have is that although I have checked all the options to download messages and automatically synchronise account locally it won't store the email contents locally until I first look open it (or at least preview it).
Unfortunately I have over 5000 emails so this presents a little problem.
I don't know if this is a bug or just how evolution works.
View 1 Replies
View Related
Mar 1, 2016
I've installed last Debian Stable with Gnome 3 environment and after added my enterprise account into the Gnome Online Accounts it apear into Evolution (but only after i've manually installed evolution-ews package) the problem is that i can't change any adevanced settings like "local synchronisation" into Evolution.
It's like Gnome Online Accounts revert back the settings each time i change it.
View 0 Replies
View Related
May 5, 2010
Evolution won't connect to our Exchange Server 2003. I have the Evolution-Exchange plugin installed and the Evolution vsn is 2.28.3. The Ubuntu vsn is 10.04 lucid. In the setup of the mail account I enter the user name in the form domainusername; in the OWA URL I enter the URL in the form - URL... and then I click the authenticate button (can't progress without authenticating). When requested I enter the password. Then comes the error message - could not connect to the server. Make sure the url is correct and try again.
I can connect to OWA using a browser. However I have to negotiate past the browser warning me that the server has a self generated certificate and not from a trusted authority. Maybe this is the problem, I don't know. The fact that I can get to OWA by means of a browser means that the firewall in our router is configured correctly, as is port forwarding to the server.The domain/exchange server is in our office and I have administrator rights.
View 4 Replies
View Related
Aug 6, 2010
Every time i go to use my java the plugin /usr/lib/jvm/java-6-openjdk/jre/lib/i386/IcedTeaPlugin.so crashes. I redownloaded it a few times and the same thing happens. but it works for awhile then stops.
View 2 Replies
View Related
Apr 16, 2011
Because I am unable to get "report-bug" to run without crashing, I would like to report a bug in "lxterminal" on Debian 6.0 (Squeeze) running the 486 kernel.When the lxterminal Preferences are changed, they are not saved afterwards (once the application is exited.) I have to change the font size each time, as the default lxterminal screen opens up too small to read.
View 8 Replies
View Related
Sep 29, 2010
I have the newest ubuntu version (64Bit) with claws mail 3.7.4. When I click:
Configuration->Plugins->Load
And select the python plugin, claws crashes as soon as I clock ok.
View 2 Replies
View Related
Aug 27, 2015
Debian Jessie
Iceweasel 38.2.0
Icedove 31.8.0
Iceweasel and Icedove spontaneously crash, sometimes individually, sometimes together. Upon restart they will both run, but the amount of time they run before crashing again decreases with each crash. The way to extend use of these programs is to reboot Debian. (I typically run my computer 24/7 to run community service programs.)
How do I get these programs to run without spontaneously crashing?
View 9 Replies
View Related
Aug 18, 2010
I got a problem with gstreamer programs and pulseaudio. I am running Debian Squeeze and needed to install pulseaudio to get better bluetooth-headset support. After installing everything every application except gstreamer applications could access the sound server the right way. Even flash and sdl are running via ALSA routing to pulse.
If I start programs running with gstreamer they crash with a segmantation fault. Totem does not start anyway. If I run it in the terminal it crashes immediately with a segmantation error. The debug mode prints out $ totem --debug
(totem:3450): Totem-DEBUG: Received SaveYourself(SmSaveLocal, !Shutdown, SmInteractStyleNone, !Fast) in state idle
(totem:3450): Totem-DEBUG: Setting initial properties
[Code]....
I have installed the gstreamer plugin for pulseaudio and the gstreamer-plugins-good and bad. I started gstreamer-properties and choosed the right output driver. When testing the peep comes out of the right output.
Via google I founded some bugs, that were similiar to mine. But they had made the mistake not to install the plugins. I also can not choose ALSA in gstreamer and do the routing way. The programs using gstreamer simply crashing. I tried exaile. It also crashes the same way like rhythmbox. Is it a real bug? Or can I do something against that. VLC and kaffeine running very well. But I would be sad about not being able to use rhythmbox. I like that fast program. Or is there a way to get rhythmbox tto not using gstreamer?
View 6 Replies
View Related
