I'm about to reinstall Windows XP on a system that I also have Ubuntu installed on. I'm a bit confused how the boot loader works in a dual boot system. After reinstalling XP will I have to do something, like reinstalling GRUB somehow?
View 3 RepliesI'm trying to reinstall FC10 after a foolish mistake I've done that costed me operation of my Fedora partition (uninstalling SELinuxpolicycoreutils).
I have a dual boot Ubuntu - FC 10 machine and delete my old fedora partition with GParted. However when I try to install FC 10 from the live CD using the option "Use free space on selected drives and create default layout" I get the error message:
Could not allocate requested partitions:
Partitioning failed:
The following errors occurred with your partitioning:
You have not defined a root partition (/), which is required for installation of Fedora to continue.
This can happen if there is not enough space on your hard drive(s) for the installation.
Press 'OK' to choose a different partitioning option.
This is the output of fdisk -l :
Partition table entries are not in disk order
My last option is erase everything from my drive including the Ubuntu partition and start over the installation, something that I would like to avoid.
can I reinstall one os without overwriting the other?
View 2 Replies View RelatedI've re-installed Windows and now can't boot xubuntu 9.1. I've looked at: [URL]. I did the the fdisk -l and tried mounting each of the partitions but I couldn't mount sda4 which I think is the partition that my xubuntu is located on. A clue that this is the partition is that it is the only one of type extended as I saw in gparted. It was also the only one apart from sda5 that I wasn't able to mount and sda5 I think was an old USB partition. Anything else I could try or are you going to need the output of "fdisk -l" to get a fuller picture.
View 3 Replies View RelatedHave 2 HDDs, ubuntu 804 is on primary, xp is on secondary. using grub boot loader which defaults to xp.
xp install has crapped out and needs reinstalling. any caveats i should be aware of?
My thoughts were that i should just stick the xp cd in, boot her up, reformat secondary, install xp and everything would be fine?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
i am having ubuntu 8.04. i have installed windows 7 but i am not able to boot into ubuntu 8.04. i have new version of ubuntu 9.10 in CD. does reinstalling the new ubuntu will overwrite my all previous data which i had in older version of ubuntu?
View 4 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedI am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedI just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I have a 160 GB hard disk with three partitions (All NTFS):
C: (30 GB) (WINDOWS XP system partition)
D: (60 GB)
E: (60 GB)
I want to install Ubuntu on another drive (D: in this case). I have backed up all my data on D: drive. What are the steps in doing so and does Ubuntu support NTFS? If it does then will I be able to read and move data between all the drives without any problem (while running either of operating systems)?
I tried to set up a dual boot system on two separate hard drives. I installed Windows XP first (because doing so in past experience has made it easier) on the PATA 20 GB hard drive configured as slave on the first IDE channel. Then I installed Ubuntu 9.10 on the PATA 80 GB hard drive configured as master on the first IDE channel along with an NTFS partition on this drive:
[Code]...
I can't for the life of me get my GRUB whatever version I have to dual boot these. I've spent over 3 weeks on it and then finally gave up.
But It would be really nice since I have so much software that is solely devoted to windows. Not to mention with my photography stuff it's just a whole lot easier to run everything through windows. But for the general census I do prefer Linux.
I'm running these two operating systems. (although I can't access my Windows 7 because of the boot menu problem) I think that's all that needs fixed but I'm not sure.
Ubuntu 9.10 ( I believe it's 64bit although the "about" doesn't specify) Windows 7 64bit is installed. Currently I only have access to Ubuntu.
I have ubuntu 9.10 installed and working on a Pangolin Performance system 76 laptop with a 120 gb hard drive. The ubuntu install has 65 GB free at the end of hard drive (done using Fdisk). It is STATA II hard drive. I got a dual boot to work on a upgrade for an HP desktop for my mom so I know the basics. Using the windows 7 OEM home premium I go the first steps i.e. time ect. Then it shows partitions (as 4 seperat objects 1 primary and 3 logical). The 2nd and 3rd are swap and more ubuntu space. The free space also comes up as logical and is the 4th partition. I try to install and says can not use this partition on the hard drive.I press the format and in changes to extention but still gives the same error (error log is not viewable in the install). All a can do is press a formate button in the install no menu. I formatted as NTFS in gparted and it still would not work. I saw posts about bios and XP but they were old.
View 5 Replies View RelatedI am newbie to linux os.I want to dual boot ubuntu 9.04 with windows 7 which is already running on my pc.When i tried to do it with live cd i am getting an error message "Permission denied" while extracting files from cd drive.The log file shows the information given below.My system specifications are code...
How to do proceed with it?Any body know about the error in the log file?
For a couple of years I have wanted to use a version of Linux rather than Windows. I currently use XP and regard myself as a reasonably experienced Windows user. My current system has two SATA HDDs - roughly 500Gb, the 'D' drive, and 140Gb, the 'C' drive, and I have 1Gb RAM. So I decided to try Ubuntu 9.10. I downloaded the installation file, created the disk and ran it live for a time. Then I decided to take the plunge and install properly.
I created free space on the C drive, around 17 Gb, in which to install ubuntu. The installation into 'the highest amount of free space' seemed to go well but when I rebooted I was given no opportunity to select Ubuntu - it booted straight into XP. So I tried again. This time I chose to 'install them side by side'. Again the installation went well but again, on the reboot, the system went straight into XP. I guess I must be missing something - can anyone tell me how to install so that I can boot to either XP or Ubuntu?
Question in title. I just wanted to know if anyone has tried it and if they were successful. And, if successful, any tips to make it easier.
View 4 Replies View Relatedi am trying to dual boot 10.04 with windows.
Windows works fine and i have 200g of unallocated space for ubuntu.
When i boot from my burned iso image i get the following error
(this is not word for word) "The disk has encountered an in-recoverable error.
restart your computer or try the installation again".
Note: I have tried re-burning to a different DVD still the same thing,
Also just to test it out i successfully upgraded from 9.10 to 10.04. But i want a clean install not a upgrade.
I am trying to setup dualboot between Windows 7 and Ubuntu 10.04 on my new system.
I have partitioned off a 1.5 TB drive, and given 500GB to Windows 7, I have another 500GB drive in the machine that I am using entirely for Ubuntu.
I have Windows 7 installed correctly, and it boots/runs fine, then when I go to install Ubuntu, the install completes "successfully", but will not boot.
The first time this happened there was a flashing cursor that loaded in the top-left corner of a black screen instead of showing grub.
This second time around, the same thing happened. During the install, Ubuntu found Windows 7 Loader and added it to the grub menu.
I have tried using the super grub disk to find/resolve the issue, and when I boot using the super grub disk it displays a grub menu for me, and i can make my choice of OS.
If I choose Windows 7, everything loads fine, however if I choose Ubuntu from the menu, then everything goes black. My monitors turn off (not getting any signal), and I can't tell what's going on.
I am using the alternate install cd (have tried x86 and x64), and am installing Ubuntu using the Full Disk Encryption option.
I have run integrity checks on the install disks, and the memory check on my system, both have passed.
I've tried this once but it made my desktop inoperable maybe along the installation some things went wrong. I have this MSi all in one touchscreen desktop model AIO 2010 with windows 7 home premium installed on it and I want to dual boot with ubuntu 7. How to do it properly?
MSi All in one model AIO 2010
AMD Athlon(tm) X2 Dual core Processor 3250e
Hard disk is sata 320 g
ATI Radeon HD 3200 Graphics
How to properly install Maverick Meerkat
i'm entering the wonderful world of linux based systems and i decided after much research to start with Ubuntu, nevertheless for now i also have to stick with the most hated (at least by me) Windows XP, although at this time i'll be upgrading to the last Service Pack i'll use in my natural life (SP3).Now introductions aside, i would like to politely state that i have researched about 35 combined guides, how-to's and forum (this forum) threads, as well as ubuntu docummentation on the subject, and i still have my doubts about the whole process of booting, partitioning and installing both Operative Systems on my computer. So this is by no means a spam thread.
Now, i would like to ask to any caring soul to provide me with some few tips or hints as to the following questions.Considering i will be using one 160 gbs HD for windows and ubuntu, and a separate 500 gb HD for my Stored (and possibly shared) Data:1) I understand that it is required to have a generous size partition for both systems (xp and Ubuntu:root), also Ubuntu would need a swap partition, and also that it is best practice to make a fourth partition for the "home" or "user" information on Ubuntu.�How should i format and partition my 160 gb HD (considering i want to install everything from scratch) so i can install both Windows XP SP3 and Ubuntu with their required assisting partitions (SWAP & Home)?
2)Should i be using GPart to do the whole partition process, both for windows and for ubuntu, or should i use first a bootable disk for Windows XP, partition the HD with XP installation disk tools, and then use GPart (or QTParted if it's better?), to allow Ubuntu to be installed in the second partition created by Windows XP (i understand Ubuntu uses ext3 filesystem, so i'm having trouble to understand if the Gpart tool will "re-format" the second aprtition or it will re-allocate the size and "embed" the ext3 partition in the already assigned space )3) Along the lines of the past question, i also understand it is better to install windows first, and then ubuntu to prevent any unnecesary erasure from windows over Ubuntu, now.
How do i setup my installation so the second (500 gb) Hard drive will be (attempted to be) used as the shared data storage, and as well do i need it to be accurately FAT32 or can it be used as NTFS (i ask this because i had to format it to NTFS to backup some sensitive data for my work *sigh*).I must say i'm fairly knowledgeable with computers, or at least as much as any average home user would be, but right now i am a humble new Ubuntu user, and i am really excited to be able to have this opportunity to install it and keep it (forever if i can haha)
I switched to Ubuntu back in the days of Breezy Badger and haven't looked back since ... Unfortunately, my current university course requires me to use windows and I have set up windows 7 on an old laptop. As I don't want to use Windows full time, I have partitioned the 60gb drive into 3 :30gb Windows 7 5gb Shared Dropbox 25gb Linux Before I installed Windows, I had Kubuntu 10.04 running without any problems. The graphics support wasn't great (ATI Radeon Mobile 5700), but it booted and ran perfectly well.
Now, I cannot boot from an Ubuntu live CD. In fact, linux itself seems to have huge problems ... I have ried the latest stable versions of the following Distributions in an attempt to get the system running :K/Ubuntu 10.04 (10.10 doesn't support my wifi card)
Mint
Fedora
Mandriva
OpenSUSE
All of these distros start to load from their live CD, but freeze whilst loading and never complete booting (no error messages are displayed). I have managed to boot into Kubuntu using the live CD by turning off APIC and ACPI, but the installer behaves very strangely : the installation stalls and refuses to continue unless I hold down the alt key, or unless I continually move the mouse pointer around.
Once the installation has completed, the system refuses to load ANYTHING when I reboot. I am just presented with a black screen and the hard drive stops spinning. As I know that windows still works, I am forced to swallow my pride and restore the windows master boot record. I have also managed to install Kubuntu through Wubi, but the performance was terrible and rebooting would disable the laptop screen until I performed a hard shutdown....