Currently running Ubuntu 10.10 off of hard drive. I want to install a second hard drive and install Vista onto that drive from backup discs. I know how to install the drives: what I need to know is what order (if any) to install second drive (master or slave) and then, after installing Vista on the new drive, to get GRUB to recognize it.
View 2 RepliesI currently dual boot windows XP Pro with Ubuntu 9.10. I made a mistake last night playing with gparted and lost my E drive, which had all of my music, games and movies plus is where my Ubuntu install was. I then ended up reformatting the drive with windows and reinstalling Ubuntu 9.10.My question is how can I put my windows files on my E drive without going through the hassle of reinstalling windows.
I have a 20g IDE drive where my windows install is, windows and Ubuntu both tell me this drive is failing, (I have used it for booting since 2002, so I am not that concerned with it), another 40g IDE drive for more storage and a 160g SATA drive where Ubuntu is again installed. I want the SATA drive to be my main boot drive now, so how can I clone my windows boot to the other drive. I tried gparted but could not figure it out. I have gparted burnt to cd, booted with it and just don't understand how to use it.Also, if I clone this boot drive to the SATA drive, do I need to change jumper settings on my 40g to master when I take out the 20g drive.20g master and 40g slave on first IDE channel and 2 CD devices on second IDE channel and SATA drive on first SATA connection. I read somewhere that it is better to keep the cd devices on another channel than the disk drives.
I currently have Ubuntu 9.04 installed on my HP Pavilion A1213W alongside Windows XP. Problem is, I no longer need the XP partition (finally) but I would like to reclaim the rest of the hard drive for Ubuntu.
I'm planning on wiping the XP partition with GParted and then (hopefully) I can merge the unallocated space with my existing 9.04 partition without having to reinstall Ubuntu and lose all my stuff. Is there a way to do this? I have nothing to back my hard drive up to other than a 2 gig flash drive.
I have to reinstall windows on to my disk to run certain programs and I know I really have to uninstall ubuntu. Is there a way I can backup my whole ubuntu o/s or will it be easier for me to download a whole new disk from Net.
View 2 Replies View RelatedI recently had to reinstall Windows XP and as usual it destroyed my grub setup. I have done this before, so I simply booted from a live CD and typed this in the terminal:
Code:
sudo grub
> root (hd0,2)
> setup(hd0)
> quit
Now, the problem with it this time is that in the past in these situations I had only Ubuntu Feisty and Windows XP installed on my machine. But I have installed Ubuntu 9.04 on a separate partition (retaining the old 7.04 installation separately) since I last had to reinstall XP. Doing the above procedure restores my grub sttings to my pre-9.04 installation (i.e. I only get Ubuntu 7.04 and Windows XP in the grub menu).
Every other guide I've seen is confusing the heck outta me.
I had ubuntu, and no other OS, then I installed win7, and now I want GRUB to be my MBR.
I am trying to recover Grub2 after reinstalling Windows 7 on my computer (which always takes over everything). I downloaded the Ubuntu 10.10 image from here and have mounted the image using the given instructions.
After restarting my computer, changing the boot order, etc., the computer reboots and hangs at "Verifying DMI Pool Data............" I have done everything correctly, so what exactly is causing this problem? Should I restore Grub2 in some different way, then?
Recently when I booted Windows 7, a "check filesystem" thing got up, so I let it do its thing. And now when I start Windows 7 my computer reboots right after "Windows 7" logo pops up. Is there any way I can re-install/repair my Windows 7 without losing my Ubuntu partition and all my stuff on it?
View 9 Replies View Relatedi am having ubuntu 8.04. i have installed windows 7 but i am not able to boot into ubuntu 8.04. i have new version of ubuntu 9.10 in CD. does reinstalling the new ubuntu will overwrite my all previous data which i had in older version of ubuntu?
View 4 Replies View RelatedRemoved hard drive from our office server to check model number (windows pc). reinstalled same hardrive and now i can't connect to server from the network (MAC). it gives me error code -43.
View 9 Replies View RelatedI've re-installed Windows and now can't boot xubuntu 9.1. I've looked at: [URL]. I did the the fdisk -l and tried mounting each of the partitions but I couldn't mount sda4 which I think is the partition that my xubuntu is located on. A clue that this is the partition is that it is the only one of type extended as I saw in gparted. It was also the only one apart from sda5 that I wasn't able to mount and sda5 I think was an old USB partition. Anything else I could try or are you going to need the output of "fdisk -l" to get a fuller picture.
View 3 Replies View RelatedI have an old computer, it came with Windows 98, later I updated it with Windows XP. XP ran slowly because of it's outdated hardware. Around this time I already had a new computer. I decided to install Ubuntu on it to muck around with. However, Ubuntu also runs slowly and I have a dual-booting computer. However, when I try to get into the BIOS of the computer and run the 98 disk, I can hit every button and BIOS will not load. Question: How do I reinstall Windows if I can't access the BIOS?
View 9 Replies View RelatedI previously had a single 160gb drive with two partitions, dual booted for Ubuntu and XP. I then installed a new SSD drive and put Windows 7 on it and of course I lost grub on the MBR. I have gone through this before so I went ahead and booted the livd CD, installed grub then ran
root (hd0,1)
setup (hd0)
but then got these errors;
Error 22: No such partition
grub> setup (hd0)
setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
[Code]....
I'm about to reinstall Windows XP on a system that I also have Ubuntu installed on. I'm a bit confused how the boot loader works in a dual boot system. After reinstalling XP will I have to do something, like reinstalling GRUB somehow?
View 3 Replies View RelatedMy Windows installation had a problem and I had to reinstall Windows. The problem now is that I need to get grub back so that I can boot into Fedora. I'm using a Fedora 11 LiveCD I had sitting around. Here are the results of the command most of the way down the first page:
Quote:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
240 heads, 63 sectors/track, 32301 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x000f09ab
[Code].....
I'm tempted to try the grub-install command quoted near the end of the thread, but I don't want to do anything that will hose the system.
I have a dual boot machine (Windows 7 and Debian). W7 and debian are on the same HD but on different partitions. The debian partition is an LVM encrypted one.
The W7 needs reinstalling, and as I understand the process will overwrite the debian bootloader (grub).
Question: Is there a way to save the current bootloader and recover it after I've reinstalled W7, so I wont have to reinstall debian from scratch?.
I plan to re-install W7 on the same partition it is now, without overwriting the debian partition.
Currently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies View RelatedI'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
After Reinstalling windows how 2 boot ubuntu i.e installed via Wubi perviously on win After Reinstalling windows how 2 boot ubuntu i.e installed via Wubi perviously on windows 7. I am running Ubuntu 9.10 on my Laptop, where it installed via Wubi on Windows 7. [windows 7 (Cand ubuntu on the different drive(U(NTFS)*its not a dual boot as installed via wubi]. For some reason My Windows needs a reinstall but in this case i think i will also lost ubuntu because its installed via Wubi.
Part 1 - I need to back up all the data that is installed in ubuntu i.e. SMplayer,Graphical GTK theme,Compiz,Emerald. and its setting,means the whole ubuntu system. So that after installing windows and ubuntu as a dual boot (not wubi again)i do not need to configure and install the whole ubuntu data/software again. Its pain for me to downlad again and again the data for ubuntu [Coz low speed connection ]
Part 2 - if it is possible that after Reinstalling windows i can boot into ubuntu that is previously installed via Wubi on different drive that please tell me, how could i do that. ****if it is not possible than please show me the way to do backup all the data,software,plugin that is downloaded.etc. I need to back up the whole Ubuntu because after installing windows i am goin 2 format the ubuntu drive and make it to Ext4 that is currently NTFS and then i will install the Fresh 9.10 on that.
I had Windows XP Pro 32 bit and CentOS 5.4 installed on my Dell M6400 laptop and life was wonderful. Until I had to reinstall Windows. In the process, I reformated the C: partition of the drive where the Windows operating system was installed. I was careful NOT to reformat anything else. Now I cannot boot CentOS. The drive that has both the Windows and CentOS still shows the same partitions as were there before I reinstalled Windows, namely:
NTFS (C:) 171.82 GB
/boot 102 MB
(F:) 60.96 GB
is where my CentOS partition has all of my linux data and apps. I assume /boot should be the boot partition for CentOS I use Acronis OS Selector to show the partitions to boot. Now CentOS doesn't show as an option even if I go through the process of trying to detect a CentOS boot partition using OS Selector. I have researched this in the forums but have not found anything that was of help. There was a thread from someone who had trouble booting Ubuntu on a system with Windows Vista and CentOS but I did not see anything there that looked like it would help in my situation.
So I install Ubuntu 10.10 on a multi-drive, dual boot with windows 7 computer. At almost the end of the install, I see "running grub-install sda" or whatever it is. sda is my windows drive.So rather than asking where to install the bootloader or give you the option like it used to, it just did it to my "first" drive.
What the hell? Now my Windows MBR is gone. I like to maintain that so if my linux drive dies I can still boot into windows via the old windows boot loader.Possible to move Grub2 to my other drive and repair windows 7 drive MBR?
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
The log:
Also i try this v Ubuntu 11.04 Ubuntu 10.10
I have Ubuntu 10.04 and Windows XP running each one in a partition of two different hard drives. I want to install Windows 7 in a second partition of the hard drive where Ubuntu is running. Windows 7 did not see the hard drive where Ubuntu is running. So I understand that I need to format the partition where Ubuntu is running, install Windows 7 and later on Ubuntu 10.04 which will create the boot for the three systems. But I want to backup Ubuntu's installation, and after installing Windows 7, install the backup. So I will need to add the file for the dual booting. How can I do it? Is it there any piece of software that could create the three booting option that I need?
View 1 Replies View RelatedI have an external drive which is formatted for Linux (ext3) and want to re-format it to use it under windows. I have no data on the disk that I need, just want to re-format so I can use it for a backup for my windows7 laptop.
View 3 Replies View RelatedI recently have Decided to Try Ubuntu, So i choose the Windows Installer Method. I am Running Windows 7 Ultimate 64 bit on a 1 TB Drive with a 250GB and 500GB Secondarys. I have more than enough power to run the System this is a Custom Built $1700 Gaming Rig.So i downloaded the Installer and choose the 500GB Drive which is not the Windows Drive for Ubuntu to install to. The installer went through Successfully no issues i did the Reboot as Prompted and Choose the Ubuntu from the Duel Boot Screen but when it loads it can not find any Build information. What did i do wrong?Could it be that i need to have it attached to the same drive as my Windows operating System or am i not doing something correctly? I followed all the directions from the Installer Information on the Download Site
View 5 Replies View RelatedI'm new to Linux and I was running Windows Vista before. I mounted my Windows hard drive into Ubuntu and now whenever I try to long onto Windows I get a black screen with the mouse where the log-in page should be. I used all the commands that was I had read about like "sudo mount" and stuff and I can see my Windows files in Ubuntu but no log-on page for Windows.
View 14 Replies View RelatedIs Ubuntu like windows and can you download Ubuntu to a flash drive or external hard drive and if so what kind?
View 4 Replies View RelatedInstalled Ubuntu 9.1 karmic koala in a dualboot with Windows XP to remove a virus from the windows drive. I think the virus was found but somehow I have done something to cause a invalid drive error message at startup. I read that gparted may by a way to fix this, but I don't want to do anymore damage.
This is what is displayed when I start Gparted /home/ubuntu/Desktop/Screenshot--dev-sda - GParted.png [IMG]file:///tmp/moz-screenshot.png[/IMG][IMG]file:///tmp/moz-screenshot-1.png[/IMG]
I was wondering. Up till now whenever I installed Linux I've either dual booted with Windows off 1 HDD, or installed straight Linux by itself. However, I recently purchased a second HDD for my computer, and was wondering how I could go about installing Debian on the second drive without messing with the windows drive? Right now I have Windows 7 installed on my 1TB drive, and would like to try and install Debian on my second (750GB) drive. Would it be possible to install Debian on the second drive, install grub on that drive's MBR so I could choose between Debian and Win7 without touching the MBR on the 1TB Windows drive?
I'm paranoid about messing up my Seven installation, but really want to be able to load into Debian as well.
I installed Ubuntu 9.10 inside windows to a USB hard drive. Later Windows had a fatal error and I had to reinstall it, and lost the MBR. I've tried several "fixes" that were supposed to work and none of them worked. I don't want to lose the Data that was on Ubuntu since I've already had to lose everything that was on Windows.
View 1 Replies View Related