Ubuntu Installation :: Can't Boot Server Installed To USB
Jan 23, 2011
I've installed 10.04 Server to a 4GB USB flash drive. I can boot the resulting installation on an Eee PC 901 but I cannot boot it on the intended target system (Intel D525MW Atom based board.) The D525MW does boot both 10.04.1 Server install and 10.04.1 Live CD (both copied to a bootable USB flash drive) with no difficulty. The result with my server USB install is a blinking cursor at the upper left corner of the screen. It does not seem to make it to the point where grub would post any error message.
View 9 Replies
ADVERTISEMENT
Apr 17, 2011
Before the installation, I had triple boot of WinXP, Win 7, Ubuntu 10.10. As you can guess, the main boot-loader was grub. The second is Win 7 boot loader, and there it gives the option what to choose, load XP or Win 7.I made a decision to remove Ubuntu and install Debian(you know better than me why I did). So first, I searched a guide how to un-dual-boot. It told me to delete the two partition that Ubuntu use(swap and ext4) and write to MBR the win 7 boot-loader(using EasyBCD), so I delete them and use EeasyBCD. At this stage, I had 2 partitions: NTFS for XP and NTFS for Win 7, and the Win 7 boot-loader(and XP) worked pretty well.I install the latest testing of Debian(6 RC2) from DVD1 using this guide, except I choose to use the graphical installer, ext4(not ext3 as there), install the desktop environment, and choose to install grub(even know it didn't asked me). The swap partition I set is 3 GB because my RAM is 2 GB, even know that ubuntu set it in the past to 2 GB.The installation went pretty well, just when come to grub package, it says that there was an error with installing grub package(it didn't told me what), I had no choice, so I choose to skip over grub/lilo and finish with no boot manager. I was thinking to myself: "So I couldn't install grub, at least I have the Win 7 boot-loader(which contain XP loader), and maybe Win 7 boot-loader will recognize Debian too.". But I end up with no boot at all.It told me than when choose not to install boot-manager that I need to load /vmlinuz and give it the parameter root=/dev/sda4(my deb partition).I think that if I could install grub, I could load all my boots("sudo grub update" right?).How can I fix it?
View 3 Replies
View Related
Mar 6, 2010
can someone point me in the right direction as far as the GRUB goes. i have the partition all done already. and ubuntu is already up and running, but i am installing 7 now.
View 3 Replies
View Related
Oct 20, 2010
I've just installed 10.10 using the most basic options in the installer and allocated space on my boot disk to share it between Ubuntu with XP.
The installation seems to have gone ahead without any glitches, except on reboot, it boots straight into Windows with no option to select Ubuntu.
View 9 Replies
View Related
Oct 22, 2010
I installed ubuntu 10.10 on my lenovo laptop but couldnt get into it. I was having ubuntu 9.10 and installed 10.10 alongside. had Grub loader and all its entries still boot to my 9.10 installation. I could still see my 10.10 partition but dont know how to get 10.10 working. Any ideas?
View 2 Replies
View Related
Jul 30, 2011
I just installed ubuntu 11.04 on my PC from CD.I selected the option for it to run as dual boot with my windows xp (SP1 - don't laugh). I changed the boot priority order in BIOS to hard drive.The problem is the boot menu where i select the OS doesn't appear and I go directly into winXP. I have rebooted ubuntu from the disc and checked that all the ubuntu files are there and the drives are partitioned as set. So where is the boot menu?I notice the grub.cfg file refers to windows xp do need to change something here?
View 1 Replies
View Related
Jan 4, 2010
I installed Ubuntu 9.10 desktop x86 on my macbook pro, I selected erase and use entire harddisk, after install, I restarted, but there is only a flashing question mark on a gray background screen, if I press option when power on, I can select a disk called "windows", then it boots into ubuntu, I wonder what is the problem?
View 1 Replies
View Related
Mar 12, 2010
I am trying to dual-boot windows xp and ubuntu 8.04LTS from two separate hard drives, on a compaq d510 evo SFF. With research, the best way to do that seemed to be to upgrade to Grub 2 and all would be well...not so much. I installed each OS with the other hard drive removed, fyi. I believe that this tells me that I SHOULD be able to boot off either drive, if I could get Grub 2 to recognize...
Code:
steve@Stewie:~$ sudo fdisk -l
Disk /dev/sda: 40.0 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb788b788 .....
Code:
steve@Stewie:~$ sudo update-grub
Updating /boot/grub/grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.24-27-generic
Found initrd image: /boot/initrd.img-2.6.24-27-generic
Found linux image: /boot/vmlinuz-2.6.24-26-generic
Found initrd image: /boot/initrd.img-2.6.24-26-generic
Found memtest86+ image: /boot/memtest86+.bin
done
I have also tried adding the proper code to the 40 custom file, and while I could at least get it to acknowledge my changes, I couldn't seem to find the magic code to get it right....
The other thing I tried was adding GRUB_DISABLE_OS_PROBER=false
to /etc/default/grub
and last but not least, here is my results.txt from the boot info script. I also tried uninstalling/reinstalling grub 2, perhaps I created issues there?
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> No known boot loader is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
View 5 Replies
View Related
May 11, 2010
Was wondering how to do this. I was trying to do achieve this from looking at different guides, but I haven't had any luck.
I am on a custom PC, with dual screens; one LCD, and one CRT, from which I installed OS X 10.5.6 from a retail DVD.
I installed OS X first, because I needed to format my HDD to use GUID partition table, because you can't install from a retail DVD without using GUID. Once OS X was installed, I partitioned my hard-drive into 4 partitions from the OS X disk utility. These partitions were HFS. I then used the Ubuntu Lucid x64 Live disk to format the 3 nre HFS partitions to use ext4, for two of them, and one swap. I installed Ubuntu as normal.
I re-booted, and GRUB recognized my OS X instillation, so I tried to boot into it. It went into OS X, but with some major problems. My LCD screen was going haywire, but my CRT seemed to be working, but it took on my LCD's screen resolution and place as the main screen.
I thought my OS X instillation was badly damages, so with Ubuntu still installed on the other partitions, I re-installed OS X, which I am on now.
I want to know how to boot back into Ubuntu, while still having the option to boot into OS X.
View 9 Replies
View Related
Mar 20, 2011
I installed 10.10, dual boot. (with xp pro)Did reboot.choose ubuntu from boot options.Now only have progress bar no gui.
View 9 Replies
View Related
May 8, 2010
I've just installed Ubuntu 10.04 netbook remix on an acer Aspire One D250, specs below: Processor Name: Intel Atom N270
Processor Speed: 1.6 GHz
RAM: 1 GB
Graphics Card: Intel Graphics Media Accelerator 950
Storage Capacity: 160 GB
I had to resize the win partition, making a new partition for Ubuntu of about 15GB. I then installed the system. Everything went without problems. I was able to boot once, and verified that everything worked as intented.
However, after that, 90% of the times I reboot the bootup process hangs at a blank screen (with a blinking underscore), immediately after grub selection. If I select "recovery mode" in grub I can see the bootup messages, but the process hangs, all except one time, right after:
Code:
[2.304418] ata2: DUMMY
[2.304487] ata3: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344200 irq28
[2.304584] ata4: DUMMY
and does nothing more. There are no error messages or hints to the source of the problem, to my eyes.I've noticed that sometimes even the loading screen of the live cd will hang indefinitely, leaving me no choice other than a hard-reboot.
The rare times that the system does boot normally, everything works normally. I've tried installing using both the ext4 and ext3 filesystems. I couldn't find anything like this on the forums. Am I doing something wrong? Do you need more details?
View 9 Replies
View Related
Jun 11, 2010
So I JUST installed 10.04 on a new hard drive for the third time. I had it completely wipe the hard drive and install ubuntu itself (so i couldn't mess anything up). Well NOW it won't even boot up ubuntu much less my windows hd.
So the setup is, my first harddrive which is 640gb and has my windows on it, and then my second harddrive which is 80gb and has my freshly installed ubuntu 10.04 on it. Neither will load. I don't even get a loading screen, I just get a flashing line after my mobo's splash screen.
I ran some boot loader info script and one of the first lines was
Code:
No boot loader is installed in the MBR of /dev/sda
View 9 Replies
View Related
May 5, 2011
I have a Lenovo laptop with Windows 7 pre-installed. I would like to dual boot Win 7 and Ubuntu or Linux Mint.
In my old laptop I had an OEM Win XP disc that I bought specifically for dual boot purposes (didn't want the pre-installed vista). This only has a one PC usage though unfortunately.
how to make a windows 7 boot disk? I made a RECOVERY disk already, but I don't think that will work as a boot disk right? Particularly if I completely wipe out or swap out the HDD (which I might do).
fyi: I NEED Win7 for a few special programs for my school. WINE will not work and VirtualBox puts to much strain on my computer.
View 4 Replies
View Related
Sep 22, 2009
No problems during installation (except DVD didn't automatically eject at end).
On booting, I got a bar across the foot of the screen (shades of blue, which then changed to white with Fedora 11 on RHS); then waited ... no change, no keyboard or mouse response.
Repeated the whole installation again - same result.
Then installed Fedora 9 and it booted OK; using Admin/Display showed a default CRT and XGI Volari Z7 video card.
View 1 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Apr 10, 2010
I learn from a BSD magazine and installed PCBSD on my Dell notebok a single harddisk with a hope to have a triple boot. I have all the three OS, but could not find the menu.lst from /boot/grub/.... All I can find is a grub.cfg which is not editable. Someone from this forum said that menu.lst = grub.cfg.
View 4 Replies
View Related
Aug 5, 2010
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies
View Related
Oct 11, 2010
Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
View 4 Replies
View Related
Nov 16, 2010
Decided I'd like to take a look at OpenSUSE and installed onto my desktop. Already successfully dual booting Ubuntu 10.10 and Windows XP (which I keep purely for iTunes). When I start the PC the Ubuntu grub menu showing Ubuntu and Windows options has been replaced by a Suse-branded screen showing something that looks (to my untrained eye) like a grub menu. Ubuntu and Suse are listed. If I select Ubuntu I am shown a dos screen with "Error 15: file not found". I am then taken to the old Ubuntu grub screen but trying to boot Ubuntu from that menu returns the same error. I know all the data is still there - I can mount the drive in Suse and view all my documents.
I have searched the forums and tried to follow some of the instructions given in response to similar threads but I'm afraid I didn't get very far. Please assume that I have NO PRIOR KNOWLEDGE of Linux! I really know nothing about it and am only just getting to grips with basic terminal commands. Goodness knows why I thought OpenSUSE would be a good idea... I found instructions for running Boot Info Script and these are the results:
[Code].....
View 1 Replies
View Related
Jun 9, 2011
I've just installed 11.04 on a new machine, to be dual booted with Windows 7. The installation process completed, popped the disc back out, but when booting up I get no boot menu and just load Windows 7. I don't get any error messages or any sort of feedback. If i go into BIOS, I only have Windows 7 as a bootable option. I presumed grub or an equivalent would be installed as part of the installation.
View 9 Replies
View Related
Mar 1, 2015
I have an hp pavilion 15-b106ed with UEFI. I disabled secure boot and installed debian jessie form the CD1 iso (RC1 installer) burned to an USB key. Installation went smoothly, but after rebooting I get grub's terminal-like screen saying:
"GNU GRUB version 2.02 beta2-9ubuntu1. Minimal BASH-like line editing is supported... etc"
The problem is that as soon as I turn on the computer that grub screen shows up and I can't boot from USB anymore nor
access the BIOS settings, no matter how fast I press F9, F10 and such. I guess I have to tell him to boot from the USB using the grub terminal...
View 9 Replies
View Related
Jun 15, 2010
i want to install Fedora 13 on a x86 PCi want to boot from a usb disk, and install from a LAN http serverbut i got a faild as "Unable to retrieve the install image"i have tried to check apache log,access log:
Code:
10.0.0.105 - - [15/Jun/2010:18:44:20 +0800] "GET /fedora//images/updates.img HTTP/1.1" 404 298 "-" "anaconda/13.42"
[code]...
View 10 Replies
View Related
Jun 4, 2010
I installed Ubutnu 9.10 Server on my Dell Server for LAMP & OpenSSH server. After the install was complete, I noticed the the kernel installed on the server was 2.26.31-14-generic instead of 2.26.31-14-server.I am wondering why would generic kernel be installed from ubuntu-server 9.10 cd? And how do go about chaning to server kernel? Or do I even need to do that? Would generic kernel work as server kernel ?
View 2 Replies
View Related
Jul 29, 2011
how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies
View Related
Jul 28, 2011
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies
View Related
Jun 3, 2011
I want to some how get a list of the packages I installed. I was hoping that I could just list all of the packages that were not installed automatically as a dependency. It turns out that there are 320 packages that match that description (I think). Is there a way to do what I want to do? Shouldn't all of these dependencies have been installed as a handful of meta-packages instead?
View 2 Replies
View Related
Sep 17, 2010
I have installed vmlinuz and initrd.gz (squeeze) in /boot/newinstallation and added to Grub the lines:titleNova Instalaçãoroot(hd0,0)kernel/boot/newinstall/vmlinuzinitrd/newinstall/initrd.gzNevertheless, when I choose this option at the grub, it begins to start the kernel vmlinuz and thus restart the system. The installed Debian Lenny boots in a normal way.
View 10 Replies
View Related
Jan 25, 2011
I just bought a new Windows 7 machine and want to install Ubuntu 10.10 for a dual boot environment.There's a lot of info describing how to do this, but it all describes re-partioning the Windows drive, burning Ubuntu on a CD, inserting that CD, etc. I had a dual-boot Windows and Ubuntu machine that just died on me. Windows was on one hard drive and Ubuntu - along with my entire software development environment - was on the other. As far as I know both drives are fine.
When my new (Windows) machine gets here I want to open it up and stick in the Ubuntu hard drive from my old machine... but then I'm not sure what to do. I'd really like to be able to boot to that hard drive (or the Windows one), just like I did before. It seems that this should be simpler than installing a fresh Ubuntu from a special CD, after all, everything is already expanded and working on the hard drive. Can someone give me some pointers that will help me solve this problem?
View 3 Replies
View Related
Dec 5, 2010
What I want to do is dual boot Ubuntu and Windows 7 (which is already installed), and am wondering if I have to use the Ubuntu installer for windows to do this. I do not want to wipe my hard drive in order to install Ubuntu, and I need to install the 64-bit version. I'm wondering if I can choose which version to install if I use the Ubuntu installer for Windows. Should I just install it using a different method, or will I be given a choice on which version installs? Never mind, it looks like the normal installer has an option to install alongside another operating system, I just didn't read through the page thoroughly enough.
View 1 Replies
View Related
Apr 1, 2010
I was having so much trouble with ubuntu 8.04 that I deleted off my computer and did a fresh install of 9.10. I downloaded the 64 bit iso from the internet, burned it to a disc and installed it. When it asked if it should be the server version I thought I said no. Now when I boot it only boots to the server version and all I get is command line. Can I get out of this and get my regular ubuntu screen back or did I install the wrong version?
View 6 Replies
View Related
