Ubuntu Installation :: Can't Boot Drives Or Windows XP After Upgrade
May 24, 2010After attempted upgrade on my dual bot drive I can no longer boot Windows XP or either of my 2 sata drive.
View 5 Replies
ADVERTISEMENT
Ubuntu Installation :: Dual Boot 10.10 And Windows 7 On Seperate Drives?
Mar 8, 2011I am trying to install ubuntu 10.10 and windows 7 on my hard drive. I want to install both the OS on seperate drives. can anyone tell how to do it? I know that there are screenshots on ubunutu site itself but i am new to ubuntu and I am unable to follow instructions.
I first installed ubuntu 10.10 in dec 2010 using my ubuntu dvd. Now I am reinstalling it again but the setup screens have changed? hows that possible? i mean its the same disk. does anyone know why? or am i drunk.
Ubuntu Installation :: 10.04 And Windows 7 Dual Boot With Seperate Hard Drives?
Jun 21, 2010I'm a n00b at dual booting and I plan on installing Ubuntu 10.04 on a separate hard drive than my Windows 7 64 bit one in a dual boot situation. I have read that you can do this by unplugging the Windows hard drive, install Ubuntu on the other one, and than plug the Windows hard drive back in and everything will be fine and dandy. Is this correct? If it is, will I have to manually set the Primary and Secondary drive (in the BIOS I think?), or will it automatically do that.
View 6 Replies View RelatedUbuntu Installation :: Can't See Drives - Alternate Installer Doesn't Detect Windows - No Boot?
Feb 16, 2011I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
Ubuntu Installation :: Dual Boot - Windows 7/10.4 - No Windows Now After Upgrade
Apr 30, 2010I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
Ubuntu Installation :: Cannot Boot Into Windows After Upgrade
May 9, 2010I have searched and searched but cannot find someone with the exact problem as me. I upgraded to LL today. During the installation it asked me which parts to install grub to. I should have just checked all the boxes, but i cant remember wat i pressed.
Now my grub menu look like
-ubuntu
-ubuntu memtest
-windows 7
when i choose windows 7, it just goes straight back to the grub menu . .
Ubuntu Installation :: Windows XP Won't Boot After Upgrade?
May 9, 2010I just upgraded to 10.04 and now all I'm getting is a flashing cursor when I try to boot Windows in Grub. I can load the Windows partition in linux no probs so I know it's all ok, although I'm going to backup before I try anything risky!
Anyway I've had a look around and can see people who've had the same prob but only really with Windows Vista and 7. So... just trying to figure if there's anyway of getting grub to load WindowsXP properly!?
I've run boot_info_script055.sh which was recommended for one of the Win7 answers and posted the output below.
Quote:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[Code]......
Ubuntu Installation :: Can't Boot Windows Partition After Upgrade To 10.4
Apr 9, 2010After upgrade to Ubuntu 10.4 i can't boot windows partition. the only thing i get it's a blinking underscore after choosing it from grub. under ubuntu the window partition seams to be ok, and i can access every file.
this is my partition table:
sda1 - ntfs
sda2 - extended
sda5 - swap
sda6 - ext4 linux (0x83)
is there any tool to config grub? like yast on suse? (off the topic : is there any "grafic" version of grub?)
Ubuntu Installation :: Windows VISTA Won't Boot After 10.4 Upgrade?
Jun 5, 2010After the upgrade to Ubuntu 10.4 I'm not able to boot on my Windows Vista any more. It is most likely due to my fault during installation, since I ask to overwrite with GRUB also Windows partition's MBR (but if I remember well I think it was not the best solution to put as default overwriting all the MBRs).Anyway I was not able to fix it until now.Here is the RESULT.txt from the boot script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
[code]...
Ubuntu Installation :: Can't Boot Windows XP (separate HDD) After Upgrade To 10.04
Jun 15, 2010Basically, as the topic reads, I normally run Windows XP, and installed Ubuntu on a new HDD this week (Karmic). However, realising later that there was a new release, I just upgraded through the network, completely ignorant of their being anything wrong with this (Windows drive still being connected at this time). Now Ubuntu boots fine, but when I select Windows through the GRUB set-up, it just displays a black screen with the '_' cursor blinking and goes no further.
I have absolutely no clue how to fix this, reading through various forum posts and messing with the boot command (or whatever you call it when you push 'e' at the GRUB screen) all day to no avail. One of the things I've download was the Boot_Info_Script, so hopefully someone out there can gleam some information on how the heck I can solve this issue and boot XP once again (hopefully without having to just blow away one or both of the OS's and doing a completely clean install). If there's anything I can do to provide any further required information, My RESULTS.txt:
[Code]....
Ubuntu Installation :: Dual Boot And Anytime Upgrade For Windows
Sep 25, 2010My hard drive apparently has errors, according to my Windows 7 installation. ._. So I am going to restore to factory settings. First question - Will factory setting make me lose my Anytime Upgrade? If so, is the key that was in the anytime upgrade box re-useable? Second Question - Under the chance that I have data loss once setting up my Ubuntu-Windows 7 Dual boot system, will I lose my anytime upgrade, and is it re-usable?
View 5 Replies View RelatedUbuntu Installation :: Windows Upgrade On Dual Boot System
Apr 7, 2011I have a dual boot laptop (Acer Timeline 1830) working fine. I'm running Ubuntu 10.10 and Windows 7 Home Premium Edition. I need to upgrade Windows 7 Home Premium to Windows 7 Professional (Thats Winblows for ya.). My questions: Has anybody here done this upgrade, did it go seamlessly (Didn't destroy your master boot record, etc) and is there anything anything else i should know before doing this upgrade?
View 7 Replies View RelatedUbuntu Installation :: Grub2 Onto /boot In Prep For A Windows Upgrade?
Apr 9, 2011I've currently got a dual-boot setup with Vista and 10.10 (using grub2 on MBR).I'm about to install Windows 7 and would like for a change to use the Windows bootloader. I currently have a separate /boot partition and believe I can install grub2 there so that I can chainload it using EasyBCD.
I'd like to do this from my running system as I don't have a spare USB drive right now. confirm the command I should use baring in mind the separate /boot.If I have to wait and do it from the Live CD - is the command to use any different? FYI here is my current layout:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_root-root
37735960 15719388 20099644 44% /
none 1023876 316 1023560 1% /dev
[code]....
Ubuntu Installation :: Grub Upgrade - With Image #22 And Unable To Boot Windows
May 17, 2010I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get
2) Unable to boot windows 7
3) Unable to activate proprietary drivers
4) Perpetually being reminded to restart
Ubuntu Installation :: Unable To Boot Windows XP After Upgrade To Grub2 From Grub?
Jul 24, 2010yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #6 for /boot/grub.
sda1:
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
[Code]....
Ubuntu :: Mounting Windows Drives With Different Filenames When Boot
Feb 4, 2010i reboot, windows drives are mounted with different filenames (eg:first time d: was /media/disk and e: was /media/disk-1 but after reboot they got interchanged - e: was mounted in /media/disk). I cannot afford this as several apps use files from these drives and their path keeps changing after every fresh boot.
View 1 Replies View RelatedUbuntu :: Dual Boot - Cannot Find Windows Drives From 1.04
Jul 3, 2010I have installed winxp & ubuntu 10.04. But i cannot find my windows drives from ubuntu 1.04. how can i watch my windows drives from ubuntu 10.04
View 3 Replies View RelatedUbuntu :: After Upgrade To Lynx None Of Of External Drives Cd Drive Or Flash Drives Are Pick?
May 9, 2010upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies View RelatedUbuntu Installation :: Can't Mount Drives After Upgrade
Mar 10, 2011a few days a go I got Samba messed up and I decided to just reinstall Ubuntu. Ubuntu resides on an 80GB drive and I have 2 1.0 TB drives that I use for storage. At one time (pre-Ubuntu) they were connected to a VIA SATA RAID card and I had them on a software RAID under Windows XP. Both worked absolutely fine under Ubuntu 10.04 (which had bee progressively upgraded from the original install of 9.04.
Now, both drives have been given the same label, and neither one will mount because the file system type is reported as "via_raid_array" rather than the EXT4 that they both should be. TestDisk can read them and identifies the partition as a Linux partition, and the data seems to be there. I have even reformatted one of them and still, it will not mount.
CentOS 5 :: Dual Boot 5.4 And Windows XP From Different Drives
Mar 18, 2010I have Windows XP installed. And I also plan to install CentOS 5.4.I have two hard drives. Hitachi 500 GB and WD 500 GB.Windows XP is intalled on first drive And I plan to install Linux on Second drive. And since i find some contradicting and not understood by me posts. I have to be sure what to do. I can install Linux, then i can edit grub. and add there something like:
title Windows
map (hd0) (hd1)
map (hd1) (hd0)
root (hd1,0)
chainloader +1
When its on one drive as I understand it will definately work. But if its on 2 different drives. There is a problem that windows doesn't boot from secondary drive. So I find this article witch i cannot understand. Do i have to understand it? Or its wrong and bad decision.
[URL]
I have no RAID.After all what is step by step process of creating bootable CentOS and Windows situated on different hard drives drives?
General :: Dual Boot Windows 7 And Ubuntu Using 2 Different Hard Drives?
Nov 23, 2010I just started working with Linux over the weekend. I do have a working dual booting system but it's not configured exactly how I want it to be. Currently Windows 7 Ultimate and Ubuntu are on the same hard drive but different partitions. The Windows boot screen comes up and I can select Windows or Ubuntu fine. Grub comes up when I select Ubuntu and I can successfully select any choice in the menu and it will run properly.
Everything works great now so you may wonder why I even want to keep tinkering, well, it's not working how I want it to. This is what I want it to do. I want Windows 7 on disk 0 and Ubuntu on disk 1. I want each OS to have it's own hard drive. I want Grub to be the only boot loader that comes up with the option to select Ubuntu or Windows. I want to skip the window's OS selection screen all together. I can modify Grub, I've already done some of that on my work computer.
I've been installing from windows. Should I use a CD instead? Would that accomplish my goals without doing anything special?
Ubuntu Installation :: VirtualBox Does Not See Attached Drives After Upgrade
May 3, 2011Upgraded. VBox (Win7 - 64bit) runs well, but does not see attached drives. Removed the drives, and attempting to re-attach, usually results in an immediate Windows 7 crash. Even when attached (lucky) - the drives do not re-attach after a VBox reboot. Is there some easy way to downgrade to 10.10??
View 2 Replies View RelatedUbuntu Installation :: Boot Sequence With Dual Boot And Two Drives?
Dec 10, 2010recently sent up another computer as follows:Two sata drives. Windows 7 was installed on the first drive(sda)and booted successfully. This drive was disconnected ( I have had some installs where Unbuntu wipes out the existing C drive eventhough I am installing to D) and Ubuntu was installed to the second drive (sdb). At one point I had to rebuild the grup on the Ubuntu drive and was careful to make it installed on the Ubuntu drive. To my surprise when the PC booted up I saw the Grub menu with a menu entry for Windows. The Windows drive was always the primary drive before the Ubuntu install. I was planning on the Windows drive being the boot drive and using a boot manager to determine where to go from there. If I utilize the BIOS boot option (F12) I can boot each drive individually. I cannot in BIOS set a particular drive to boot - just a hard drive. Everything is working I am just curious why the primary drive does not boot first. IN BIOS the Windows drive is a primary SATA with a lower number that the Ubuntu drive which is listed as a secondary drive.
View 4 Replies View RelatedUbuntu Installation :: Unable To Boot From Either Dual Boot Drives
Feb 15, 2011I can only use the Live CD to operate Ubuntu. After typing in the command sudo fdisk -l, I get the following?
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
And when I boot without the Live CD, I get the following message in the GNU GRUB Version 1.98-1ubuntu7 window page.
Ubuntu Installation :: Windows 7 Won't Boot After Ubuntu Upgrade / Install
Apr 18, 2011I was dual booting windows 7 and ubuntu 10.04 with separate home partition etc. but when i reinstalled to 10.10 i somewhere messed up with the bootloader of grub. can't figure out how to fix it, and would prefer fixing it than reinstall the whole thing because i have lots of programs running on school licenses in windows and that would be difficult to reinstall.
View 3 Replies View RelatedOpenSUSE Install :: Dual Boot Windows 7 / 11.3 Using Separate Hard-drives For Each OS?
Oct 7, 2010We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
Ubuntu Installation :: Preserving Windows Drives On Switch?
Mar 15, 2011I am switching to Ubuntu soon for security purposes. I have 3 hard drives, one with my OS, one with nothing, and one with all my junk. I was wondering if there is anyway that I can only reformat and install Ubuntu onto the drive with windows, reformat the empty drive, and then transfer files from my junk drive onto the empty drive, and then format the junk drive and move all of the files back onto the junk drive? Or is the junk drive accessible from Ubuntu and not worth trying to switch formats on?
View 6 Replies View RelatedUbuntu Installation :: Dual Booting Windows 7 On Separate Drives
May 31, 2010I have tried (a few times now lol) to get this setup. I am using Windows 7 64-bit and Ubuntu 10.4 64-bit. I have Windows 7 installed on one hdd, another hdd has the System Reserved partition along with a data partition for files, the third hdd is the one where I want to install Ubuntu. I have found numerous tutorials on installing them both on the same drive, but not on separate ones. The couple I have found haven't really worked.
I think that Ubuntu is installed correctly but there is no option to boot into it. Windows 7 just happily loads itself. I have tried reinstalling and selecting 'sdc1' (the native ubuntu partition) as the location for the bootloader to be installed and then used Easy BCD to add that location to the windows bootloader which gives the option to load Ubuntu but when selected dies complaining that there is a missing file (I think it just can't find the Ubuntu bootloader).
As an aside when I get to the installation screen the Ubuntu installer keeps on telling me that there are no operating systems detected on the machine (Even though I'm pretty sure the drive it is talking about 'sda' is where Windows 7 is installed). Not sure if that matters just seemed a little wierd.
Ubuntu Installation :: Windows Is Unable To Find Any Hard Drives?
Nov 18, 2010I had installed windows XP and then Ubuntu a few months ago. I was mostly using Ubuntu only. My Ubuntu is up to date. Windows XP got the blue screen and i had to re-install it. So, i used the Disk Utility and formatted my C-drive as NTFS with a boot flag.
After that, when i attempted to install windows XP on my C-Drive that i just formatted, Windows Setup is unable to recognize any drives! I really don`t want to uninstall Ubuntu or format my whole HDD, just to install windows XP. But i also want to install windows XP as i have to run some applications in it!.
Ubuntu Installation :: 10.10 LiveCD Won't Boot With Some LG Drives
Nov 17, 2010A 10.10 LiveCD (burned from the ISO image) won't boot my system using my LG GSA-4167B DVD drive which has been working fine for several years.Upon boot, Ubuntu starts to boot up. The splash screen appears. The drive activity light flashes for a while and it sounds as if things are progressing. Then the drive gets into a funky pattern: click-click-spin fast. click-click-spin fast...
The purple splash screen is still present, with 5 red dots (not flashing) The LG drive happily boots up a Windows CD, BartPE CD, Ultimate Win CD, Macrium recovery CD, Gentoo distro CD, etc etc. Only the Ubuntu 10.10 LiveCD is problematic.Oddly, a 10.04 LTS LiveCD obtained with the book "Ubuntu for Non-Geeks" boots OK. (that CD is not burned at home). The LG GSA-4167B is 2005 vintage, with IDE interface. I swapped it for an even older (2004) LG DW1610 DVD drive. That drive boots the 10.10 LiveCD just fine.
I downloaded the 10.10 ISO image a second time and burned a second copy. Same results. The LG website had new firmware available for the GSA-4167B drive, so I downloaded that and flashed the drive. No change - it still won't boot the 10.10 CD. Are LG drives known to be problematic with Ubuntu? Are the CD-DVD drivers on the LiveCD limited in their functionality? If I go out and buy a new drive, should I avoid LG products? Perhaps I'l try burning the 10.10 ISO on to a DVD and see if that makes any difference.
