Ubuntu Installation :: Grub2 Onto /boot In Prep For A Windows Upgrade?
Apr 9, 2011
I've currently got a dual-boot setup with Vista and 10.10 (using grub2 on MBR).I'm about to install Windows 7 and would like for a change to use the Windows bootloader. I currently have a separate /boot partition and believe I can install grub2 there so that I can chainload it using EasyBCD.
I'd like to do this from my running system as I don't have a spare USB drive right now. confirm the command I should use baring in mind the separate /boot.If I have to wait and do it from the Live CD - is the command to use any different? FYI here is my current layout:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_root-root
37735960 15719388 20099644 44% /
none 1023876 316 1023560 1% /dev
[code]....
View 4 Replies
ADVERTISEMENT
Jul 24, 2010
yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #6 for /boot/grub.
sda1:
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
[Code]....
View 1 Replies
View Related
Mar 7, 2010
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
View 3 Replies
View Related
May 17, 2010
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies
View Related
May 17, 2009
I'm really happy with my Fedora 10 install on my AAO netbook but am even more excited by the prospect of switching to the full F11 release asap.I'm still a n00b so bare with me here - I know the hidden folders in my home folder contain app info like custom settings etc. So, how can I have all my apps reinstalled and config'd as they are at the moment once I have F11 installed?I've heard of linux backup apps and read a little on rsync but really I'm looking to simply point F11 in the right direction after install and have the OS take over and possible get the settings from my home folder backup on my LAN.
View 2 Replies
View Related
May 7, 2010
I upgraded from 9.10 to 10.04 (no fresh install, an upgrade). During the upgrade, the installer asked me for the harddisks and partitions to include. I gave him the following ones:
Harddisk 1
1. Windows XP
2. Windows 2000
Harddisk 2
3. Ubuntu 10.04
After the installation was complete, I could only start Ubuntu. Both Windows versions just showed a flashing cursor at the left upper top screen. No HDD activity! How can I get WinXP and Win2000 selectable within grub2?
View 2 Replies
View Related
Jul 18, 2010
My girlfriend upgraded from Karmic 9.10 to Lucid 10.04 when the upgrade became available. She did it from Update Manager as opposed to a clean install.
I have no idea what she did, or how the process works (I installed from a Live CD on my own computer) and ever since she did it, she hasn't been able to boot into Windows XP from GRUB2.
GRUB2 loads up fine, with Ubuntu and Windows listed. It'll boot into Ubuntu with no problems. Selecting Windows will just re-load GRUB2.
I've tried re-installing GRUB2 but that hasn't worked. My lack of imagination means I have no idea what to type in to Google, or the forum search.
View 5 Replies
View Related
Mar 31, 2011
I installed UEFI Ubuntu 10.10. Its grub2 version is 1.98. I want to upgrade it to 1.99.I try to use 'grub-install' and 'grub-setup' commands but I faild to upgrade the grub2.
And, when I add my ram to 4G, the system hangs and displays 'Not syncing: VFS: Unable to mount root fs on unknow-block(1,0)'
View 2 Replies
View Related
May 3, 2010
I have a asus eeepc 1101ha. With Karmic,it would boot into w7 without problems.I installed Lucid on another partition,and after that the w7 grub entry would leave me with a blinking cursor in the left top corner, and hang.
I booted with the w7 dvd, ran bootrec.exe to restore mbr and bootmgr, and the booted into w7 to confirm. It was working. Then I booted with the live dvd, mounted the lucid partition, and installed grub. Now choosing the w7 entry would ask for the boot media, and pressing any key would bring me back to the grub menu. Lucid and karmic boot without problems.
Installing grub from karmic now gave the same error. Running update-grub didn't change anything.As I had to use w7, I booted again from the dvd, and restored again mbr and bootmgr. Booted into w7, used it, then once again to the live cd, to reinstall grub, and once again the w7 entry in grub makes grub ask for the boot media.I've attached my boot info script.Ah, I also played with the bootable flag for the /dev/sda1 partition, but it didn't change anything.
View 1 Replies
View Related
Dec 10, 2010
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 3850d16450d12980
chainloader +1
}
This is automaticly genarated after installed ubuntu 10.10. It shows black screen with a flashing cursor after press enter. Grub 0.97 also does this with:
title win7
fallback 2
find --set-root --ignore-floppies /bootmgr
chainloader /bootmgr
savedefault --wait=2
But the wierd thing is my usb stick can boot windows 7 succesfully with the same configuration. Whats wrong with that? How can do with grub.cfg?
View 9 Replies
View Related
Jan 3, 2011
ok so sounds like everyone elses issue that i`ve seen on here but i had it all working properly until i booted into ubuntu and updated grub somehow and when it told me to reboot all i got was a grub rescue error.
Now i got ubuntu 10.10 installed to try and fix the grub 2 error but now cant get it to boot windows from the menu.
View 5 Replies
View Related
May 12, 2010
I recently installed Ubuntu 10.04 on my dual boot system and noticed that my boot options were changed. I typically have Windows XP as the default OS. Here are the steps that worked for me to get Windows XP as the default boot using Grub2.During my initial Window XP install I had partitioned my hard drive into 3 partitions:
Code:
Partition 1: NTFS format (Windows XP installation) in Linux it is called /dev/sda1
Partition 2: NTFS format (Data for Windows XP) in Linux is is called /dev/sda5
[code]....
View 6 Replies
View Related
May 3, 2010
I just installed Ubuntu 10.04 LTS on an external hard drive (USB connected) and I can no longer boot my Windows XP(SP3) from my internal C Drive. Grub gives me the list of boot choices, but when I choose the C drive, I just get these error messages:
GEOM ERROR
For Realtek RTL8139(X)/8130/810X PCI fast ethernet controller v2.13 (020326)
Client MAC ADDR: 00 13 D3 07 FD F5 GUID: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
PXE-E53: No boot filename received
PXE-NOF: Exiting PXE ROM
(The version of Grub is 1.98-lubuntu5). I don't have a Windows System CD to boot from, but is there something I can do from within Ubuntu itself?
View 9 Replies
View Related
Jun 9, 2010
I have a dell Inspiron 5150. I had perfect windows XP home installation, and decided to dual boot with Ubunutu 10.04. I copied the whole C:/ to external drive, installed ubuntu, installed windows, repaired Grub2, but now, Grub2 looks something like this.
[Code]...
View 9 Replies
View Related
Aug 20, 2010
[URL](where loading into Windows corrupts the MBR). None of the solutions in the bug thread work for me, however--I'm on a Dell system (so it's not HP tools) and I'm not running PC Angel or any similar service (I checked). I assume it is related to the Dell recovery partition, though my old laptop from Dell didn't have this problem even though it also had a recovery partition.
However, before I had partitioned and set up Ubuntu on my new laptop, I installed Wubi (for transferring over the files from my old laptop because I didn't have time to do a full install and deal with problems like this one). Wubi worked fine using the Windows Boot Loader. I understand that WBL isn't capable of loading Linux on its own, which is why I was wondering if it was possible to have GRUB installed on a separate boot partition (not the MBR) and loaded from Windows Boot Loader. All of the information I could find on it didn't work with Windows 7--but again, I know Wubi was capable of doing it. how to set this configuration up?
View 2 Replies
View Related
Apr 13, 2011
I have two hard drives - (1) 80GB (2) 500GB: the 1st HD has 3 partitions (in that order) - Windows 7, Ubuntu 10.10 & Swap. the 2nd HD is for storage only, and has 2 partitions.
I did the following - I installed Windows 7 on the first partition of the 1st HD, it booted just fine. Then I installed Ubuntu 10.10 on the second partition of the 1st HD.
Windows 7 shows in the GRUB menu alongside with Ubuntu. Ubuntu boots just fine, but when I select Windows it simply restarts the computer and the GRUB menu shows again.
RESULTS.txt of Boot Info Script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #3 for (,msdos3)/boot/grub.
[Code]....
View 7 Replies
View Related
Apr 30, 2011
Been away from linux for a few years thaught id come back and give it a try again. I have Win7 on sda and installed 11.4 Ubuntu on sdb. Grub2 Over wrote the boot sector for windows so windows wouldnt show in the boot menu. I repaired that after some research and then tried it again with 10.4 LTS version of Ubuntu. Same thing. Now I've fixed windows boot sector a second time and im ready for round 3. Any hints on how to get grub2 to boot both OS's? Ubuntu 10.4 is still on sdb I think I should just need to re-install grub2 But how to do it without Killing the windows boot sector?
View 9 Replies
View Related
Jul 2, 2011
I have Lucid installed on a computer. I added a second drive, installed Windows 7. Windows 7 boots fine if it is the only drive connected, or it is selected as the boot drive in the BIOS. I booted into Lucid, ran 'sudo update-grub' and it found the Windows 7 install on the second disk. When I try to use that Grub entry to boot Windows 7, I get this error screen:
Code:
Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disk and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disk, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000225
Info: An error occurred while attempting to read the boot configuration data.
I seem to remember in the Grub 1.x days there was a map command that would 'swap' the drives so Windows would think it was the boot drive, but the Grub2 autogenerated command doesn't have anything like that.how to get Grub2 to boot Windows 7?
View 4 Replies
View Related
Apr 26, 2010
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies
View Related
Apr 30, 2010
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
View 9 Replies
View Related
Apr 2, 2010
I recently upgraded to 10.04, all went well. Except now Windows 7 does not load. It shows up on the grub menu, but when selected just hangs with blinking cursor?
[code]...
View 5 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
May 9, 2010
I have searched and searched but cannot find someone with the exact problem as me. I upgraded to LL today. During the installation it asked me which parts to install grub to. I should have just checked all the boxes, but i cant remember wat i pressed.
Now my grub menu look like
-ubuntu
-ubuntu memtest
-windows 7
when i choose windows 7, it just goes straight back to the grub menu . .
View 2 Replies
View Related
May 9, 2010
I just upgraded to 10.04 and now all I'm getting is a flashing cursor when I try to boot Windows in Grub. I can load the Windows partition in linux no probs so I know it's all ok, although I'm going to backup before I try anything risky!
Anyway I've had a look around and can see people who've had the same prob but only really with Windows Vista and 7. So... just trying to figure if there's anyway of getting grub to load WindowsXP properly!?
I've run boot_info_script055.sh which was recommended for one of the Win7 answers and posted the output below.
Quote:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[Code]......
View 1 Replies
View Related
Mar 14, 2011
I just installed CrunchBang Linux and it's great! But I can't boot into windows anymore. I'm sure it didn't delete my Windows partition-it's mounted. My linux partition is /dev/sda1 Windows is /dev/sda2
Code:
sudo update-grub
Found linux image: ....
Found initrd image: ....
Found linux image: ....
Found initrd image: ....
done
how I can get Windows to reappear? I've had bad luck with Grub in the past and I don't want to fight it on my own...
View 9 Replies
View Related
Apr 9, 2010
After upgrade to Ubuntu 10.4 i can't boot windows partition. the only thing i get it's a blinking underscore after choosing it from grub. under ubuntu the window partition seams to be ok, and i can access every file.
this is my partition table:
sda1 - ntfs
sda2 - extended
sda5 - swap
sda6 - ext4 linux (0x83)
is there any tool to config grub? like yast on suse? (off the topic : is there any "grafic" version of grub?)
View 3 Replies
View Related
May 24, 2010
After attempted upgrade on my dual bot drive I can no longer boot Windows XP or either of my 2 sata drive.
View 5 Replies
View Related
Jun 5, 2010
After the upgrade to Ubuntu 10.4 I'm not able to boot on my Windows Vista any more. It is most likely due to my fault during installation, since I ask to overwrite with GRUB also Windows partition's MBR (but if I remember well I think it was not the best solution to put as default overwriting all the MBRs).Anyway I was not able to fix it until now.Here is the RESULT.txt from the boot script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
[code]...
View 9 Replies
View Related
Jun 15, 2010
Basically, as the topic reads, I normally run Windows XP, and installed Ubuntu on a new HDD this week (Karmic). However, realising later that there was a new release, I just upgraded through the network, completely ignorant of their being anything wrong with this (Windows drive still being connected at this time). Now Ubuntu boots fine, but when I select Windows through the GRUB set-up, it just displays a black screen with the '_' cursor blinking and goes no further.
I have absolutely no clue how to fix this, reading through various forum posts and messing with the boot command (or whatever you call it when you push 'e' at the GRUB screen) all day to no avail. One of the things I've download was the Boot_Info_Script, so hopefully someone out there can gleam some information on how the heck I can solve this issue and boot XP once again (hopefully without having to just blow away one or both of the OS's and doing a completely clean install). If there's anything I can do to provide any further required information, My RESULTS.txt:
[Code]....
View 5 Replies
View Related
Apr 29, 2010
Getting my 8.04 system ready to upgrade to 10.04 by doing all the upgrades but running into the following. It looks like the update-rc.d script it being passed bad arguments?
Code:
$ sudo aptitude safe-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
[code]....
View 4 Replies
View Related
