Install :: Can't Boot Ubuntu After Installing OpenSUSE / Solve It?
Jan 3, 2010
I bought a Linux magazine as a Christmas present attached to it was a 8GB distro-loaded disc sporting Ubuntu 9.10 (which is already on my system,) Mandriver, and open-SUSE 11.2 which I decided to install.
Problem is, I can't get into Ubuntu anymore, where all my mail music ect is.
Ubuntu is listed with vista in window 2 of open-suse grub. When I try to boot Ubuntu I get an earlier kernel splash which is somewhat magnified and busybox v1.1.3. Vista boots OK.
Would un installing openSUSE put things back as they were? I can learn about open-SUSE using the DVD
View 9 Replies
ADVERTISEMENT
Dec 27, 2010
I'm running 10.10, I just recently installed a new graphics card, a Radeon HD4670, Ubuntu loads, and after it's finished loading, it goes to a black screen, and stops loading. I previously was using a nVidia 6200.
View 4 Replies
View Related
Apr 18, 2010
I've been having trouble booting into Ubuntu 9.10 after installing OpenSUSE 11.2. When I installed it, the opensuse setup detected the partition ubuntu was installed on and added it to the grub menu. I also have windows vista and windows 7 installed and both boot up just fine from the opensuse grub boot menu. The ubuntu installation that i have was an upgrade from 9.04 so I am not using grub2 in that installation.
System Info:
Amd Phenom II X4 810 2.6ghz
4 gb ram
Ubuntu 9.10 64 bit
OpenSUSE 11.2 64 bit
View 3 Replies
View Related
Jul 14, 2011
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
View 9 Replies
View Related
May 12, 2010
So I'm using opensuse 11.2 and recently installed ubuntu 10.04 to a different partition and all went well. when I boot opensuse I get a lot of interesting messages yet everything seems to load fine and I've not noticed anything behaving differently. I checked the boot log via
Code:
Looking through it i did see a line in there that looked familiar from the boot up and it is
View 6 Replies
View Related
Jul 15, 2010
I'm trying to make my iMac "Triple Boot".But using rEFIt as the boot loader, and installing Grub or Lilo makes the "Boot Menu" complicated.
"SO, DO YOU THINK IT'S A GOOD IDEA NOT TO INSTALL "GRUB, LILO, OR OTHER BOOT LOADERS", and just let rEFIt to do the job?
View 4 Replies
View Related
Jan 25, 2010
Well, in first place let me tell you that my HDD boot sector or i dont know what is damaged, so to boot i made a boot usb with the grubdos utility, so anytime i want to boot in win7 i have to plug my usb and select win7 from it.Today i finished downloading the opensuse iso, then i mounted the image with poweriso and initialized the install, and it asked me to restart my computer, after that when i boot from my usb pendrive it goes directly to the opensuse install, but it just showme the blackscreen and nothing happens.
View 8 Replies
View Related
Aug 23, 2010
in the direction of a HOWTO (cant find one via Search or Google)hat tells me how to install dm_mirror to enable a boot of an 11.3 system that uses LVM for root and swap? I really would likecommands rather than using the GUI as it will help me understand what is going on in the background
View 1 Replies
View Related
Sep 28, 2010
I have an existing WinXP install on the main drive (/dev/sda) of a Dell laptop. I installed Suse on the second (caddy tray) drive and didn't touch the existing windows partition during install.
After install completed, I found there was no boot loader entry for WinXP during startup. Only SUSE-related stuff. I opened YaST boot loader and tried creating an entry of type "other" and device of "/dev/sda1" and set this as the default entry.
The /boot/grub/menu.lst file now has an entry:
When I restart the machine I get an error message:
View 9 Replies
View Related
Mar 29, 2011
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
View 1 Replies
View Related
Sep 13, 2010
Just did a clean install of 11.3. After first try, system couldn't boot for hard drive. When installing a second time, I noticed that booting from a boot partition and the MBR are disabled by default. I enabled both and proceeded with the install. System now boots fine. Since the automatic partitioning created a boot partition, I'm assuming that that is where the system is booting from and I didn't need to enable booting from MBR, but am not 100% sure. So make sure to at least enable booting from a boot partition
View 3 Replies
View Related
Nov 23, 2010
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies
View Related
Dec 15, 2010
I have a laptop with the CD-ROM apparently broken, so I installed OpenSuSE 11.4 milestone4 from USB stick .unfortunately in the end of the installation I had a GRUB configuration error (twice) . then, in the third time I removed GRUB from the installation procedureSince my other GNU / Linux is Ubuntu, I did update-grub on ubuntu, it detects the presence of OpenSuSE but it does not add it to its grub.cfgwhen I wanted to add it manually to ubuntu's GRUB, I realized that, in OpenSuSE, the /boot path was empty.My Question is: Do you know how to put the files needed to boot OpenSuSE (initrd, vmlinuz , ...) in the directory /boot without installing OpenSuSE's GRUB ?? (ie keep the ubuntu's GRUB)
View 8 Replies
View Related
Mar 21, 2011
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
View 1 Replies
View Related
Jul 10, 2010
I'm trying to install workbench on my opensuse 11.2 x64 bit version but I got a problem with python available version on opensuse is 2.6.2 and the required version is 2.3.
how Could I solve this?
View 1 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
Jul 21, 2010
I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies
View Related
Sep 21, 2010
Suddenly, after installing, boot was failed.
[Code]...
i was surprise, because in initrd-2.6.34.7-0.2-default all was ok.
View 2 Replies
View Related
Jan 12, 2011
Configuration: AMD 2500+, 2GB RAM, ATI HD3850 AGP
Problem: Can not install OpenSUSE 11.3. Boot from the disc - the installation screen resolutions, modes of installation - everything is in order. But when the installation can proceed - loading (logo) and just a black screen - possibly the installation goes - but no picture. Also try to set mode "vesa" - loading equipment "ok" ... "ok" ... "ok" ... "ok" ... and again in the black screen.
View 9 Replies
View Related
May 20, 2010
Very new to linux, just downloaded Ubuntu 10.04 and installed it, dual boot, no problems with initial installation.
Trying to install graphics card driver for:
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GTS 512] (rev a2)
Using Administration -> Hardware Devices
I selected the recommended driver and clicked activate. Download started then failed with error message:
SystemError: Failed to fetch http://gb.archive.ubuntu.com/ubuntu/...ntu3_amd64.deb Connection failed [IP: 91.189.88.30 80]
Screenshot attached.
Tried several times now and the download doesn't even seem to start any more.
My Internet connection is 3 mobile broadband, which may have something to do with it, bit it seems to be working well at the moment.
View 1 Replies
View Related
Apr 22, 2010
My computer won't boot up from the installed version of Ubuntu. I was running 8.04 with no problems, but it stopped working after entering a command code to fix the limit for virus definitions on Avast. I removed the code, but now on boot up all I get is a blank screen and blinking cursor.
I can boot up with an Ubuntu 9.1 live disk, and it shows the installed version of Ubuntu and all my data are still there. Is there a way to do a general repair, that will enable my computer to boot up from the installed operating system?
View 9 Replies
View Related
Jun 26, 2010
Can't boot after updating x this has happened before but not like this. Grub works just fine but nothing after what I can't do
1 10.04 = black screen
2 recovery mode=black screen
3 ctrl+alt+f1 = nothing
View 9 Replies
View Related
Feb 6, 2010
Can't boot after upgrade to 2.6.31-19 kernel. Boot procedure stops on "Mounting root file system..." stage with message:
/init: line 218: syntax error: 0xhda1.
View 9 Replies
View Related
May 2, 2010
I installed lucid the other day on my laptop, the first time it booted after installing it gave two error messages (unfortunately I can't remember what they said). The errors stopped appearing after that but once I select Ubuntu from the boot menu, it just hangs on a black screen for a good 15 seconds at the least before it runs the plymouth screen for like 2 seconds (the progress bar is already full) and then goes into the login screen. Here is my boot chart:
http://akgenome.com/files/bootchart.png
I was wondering if anyone can tell from that what is causing the issue and perhaps how to fix it? The boot log is like 3 lines long and is completely normal.
View 1 Replies
View Related
Jun 28, 2010
I have a dual boot (2 hard drive) system, and upgraded to 10.4. Booting into XP results in a flashing cursor that doesn't do anything. I know that GRUB screwed everything up, but I need to know what to do--and assume I don't know what I'm doing--to restore my dual boot ability.
Here's what I get after running a boot info script code...
View 2 Replies
View Related
Oct 16, 2010
For the past few days, my Ubuntu server (it is a desktop that functions as a server, Desktop installed) have been very slow.
Today, it stopped responding to ping, I could not SSH into it (once, I managed to come so far that it asked for my password, but I got timed out) and I could not connect via VNC.
I switched it off, to boot it up again. Post completed, and the screen went black, before the white text "Read Error" appeared on the screen.
I shut it down again, waited a minute or so, before switching it back on. This time, the "read error" did not show up. The "text only" startup for Ubuntu showed up, so I hoped it was all okay. It turned out it wasnt.
I have some pictures:
http://yfrog.com/4pimag0127xj
http://yfrog.com/jnimag0128bj
The top lines are code...
Any ideas on what could be the issue here, and how to fix it?
View 5 Replies
View Related
May 3, 2010
I just recently upgraded my kubuntu install from karmic to lucid and now it takes about 10-15 minutes to boot. Directly after the upgrade it was pretty slow already, but it got worse every day from then. The karmic version was a wubi install I moved to a dedicated partition using lvpm. Here are the results from the bootinfoscript code...
View 9 Replies
View Related
Nov 25, 2010
My first attempt at seeking help has not been very successful. Probably to much of a narrative. If you want to know How I got in this mess see my first post.
Machine: Asus Eee PC 1015
What I know: I can't boot into anything but Live USB
What I think: Win7 starter is still there
Mint9 is lurking as well
Vista recovery partition exists
What I don't have: External USB DVD or CD drive
Win7 Recovery
What I need code...
View 9 Replies
View Related
Jan 23, 2011
I installed kubuntu a while back on an AMD64 3200 and hit some problems I can't solve: ran out of space on /boot & opera KEYEXPIRED.This is a multiboot machine. I have the /boot partition on an extended ext4 /dev/sda5 which is 50 MB size which was fine when I first set it up. It seems however that it is no longer sufficient for GRUB2:
Code:
$ sudo apt-get upgrade
...
[code]....
View 9 Replies
View Related
Jul 3, 2010
I have fedora 13 64 bit installed on my desktop. I have i3-530, 2G ram, wd 500g sata, ide samsumg dvd-rw, asus h55 mb, geforce 9600 low profile.
problem is f13 often almost always freezes at boot up.i.e., after grub, that blue heart hangs on there waiting to be filled up.. but wait forever.
what might be the problem?
View 10 Replies
View Related
