Does anyone know any software or tricks how slow down cpu. The aplet on top panel whose control cpu freq allow set only 2Ghz. On windows to EPU-Six i can for example set 1,8Ghz and automaticly vcore drop to 0,967V. On ubuntu the lower value is 2Ghz and 1,1V. I have Asus P5Q PRO on P45 chipset and Core 2 Duo E8400 on Ubuntu 9.10
View 7 Replies
I have an EEEPC and wanty to make use of the ASUS SHE. However, I don't want a program that automatically changes performnce modes each time I go to AC or battery power (Jupiter). Jupiter also causes lag when I suspend the EEEPC pr when I plug in the AC adapter. I pretty often work on battery when I'm at home and I don't need powersavings then. I want a way to be able to turn on the power saving mode (I've heart it does more then just undercloaking the processor) whenever I want, but I don't want those modes to be changed automatically.
View 4 Replies View RelatedHave you ever used an SD card as a substitute for a hard drive? The target machine is an MSI "nettop," more or less equivalent to a couple of netbooks glued together. It has dual Atom CPUs, 2 GB RAM, an optical drive, and a bunch of other ports and connectors not usually found on netbooks but standard on a desktop machine (thus the "nettop" moniker). So this is no powerhouse computer, but Ubuntu should run decently on it.
That's the thing: the machine has no hard drive. Instead, it has an 8 GB SDHC card. While the card is a "Class 10," and therefore well above average for an SD card, it's proving to be a poor substitute for a real hard drive. I'm working on the machine for a friend, and I think I'm going to have to recommend he spring for a new SATA HDD. Installing Ubuntu 10.04 from a CD-ROM to the SDHC card took forever. At least there was ample space (just try cramming Windows 7 into 8 GB!).
Similarly, the first round of updates took almost all day to install. The system is very sluggish in general, more so than is normal for a netbook-class machine, based on my experience with Ubuntu 10.04 on an Acer Aspire One D150. I suspect that the basic problem is the glacial speed of the SDHC card compared to a SATA hard drive. Although the SDHC card is rated for 20 MB/s reads, that's nowhere near even a slow SATA hard disk.
Write speed is likely a lot slower even than that, which perhaps explains the hours and hours required to install Ubuntu + updates. It seems as if launching apps is slow as well - again, probably a symptom of the SDHC card's sluggish reads, compared to a SATA HDD. Are there any secret tricks to make running Ubuntu off an SDHC card more bearable? Or should I just tell my friend he needs to buy a regular HDD?
how to install Tesserect engine on Ubantu?
View 1 Replies View Relatedi am trying to install sun grid engine on Linux.And i googled a lot but unable to understand from where i should start.
View 7 Replies View RelatedI am a software developer, presently porting a game engine from Visual Studio to GCC. I'm working on LTS 10.04. The project uses C++ lambdas, and I really would like to keep it this way. Therefore, I need GCC >= 4.5 to compile it.
I wouldn't like to reinstall entire OS, or to have to manually update this single program every time. Is there an option to update it from 10.10 repositories, pointing out, that I need only this package (and it's dependencies)? Or is there any PPA that does the trick for me?
Generally, the entire packaging system of Ubuntu rocks, as long as I can find up-to-date PPAs of all packages I need to have in recent versions (like mono).
has anyone tried to install Pinot the personal search engine in Maverick? I found the package it depending require package libtextcat0 and libtextcat-data, but once selected, many components of openoffice will be removed.Is this correct behaviour? Or Pinot is not longer supported by Ubuntu
View 1 Replies View RelatedI've looked through the forums and found that installing openmotif may fix my problem. I tried it but to no avail. Here is my challenge, I'm trying to install Grid Engine on my VMWare fedora installation. I get this dependency error:
Quote:
rpm -i sun-sge-bin-linux24-x64-6.2-5.x86_64.rpm
error: Failed dependencies:
libXm.so.3()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
libXp.so.6()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
sun-sge-common = 6.2 is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
I installed the latest version of openmotif and when I do a search for the two files, there is no libxm.so.3 but libxp.so.6 is there. When I try to install the rpm again I still get the exact same error.
I've installed Debian twice on my new system and always have mei_me errors and the system doesn't boot. The errors are:
mei_me: HBM haven't started
mei_me: link layer initialization failed
mei_me: init hw failure
mei_me: initialization failed
While it would suggest some sort of hardware problem, this system is working fine with Ubuntu 14.04 & 16.04.
how we can install julius 3.5.2 under ubuntu or julius is a large vocabulary continuous speech recognition (LVCSR) engine
View 2 Replies View RelatedI am setting up an ubuntu server, and i was wondering if there was a program that i could apt-get that would manage my Domain names and create directories and FTP and all that good stuff like IIS does in windows. While i am fully capable of editing the files and working the server through the terminal, noone else in my office is and if we are to switch to a linux server they will need to be able to work it.
View 9 Replies View RelatedAnyone know if Ubuntu 9.10 or Ubuntu Netbook Remix 9.10 will install and work properly on the new Asus Eee PC 1001P? Mine arrives tomorrow. I searched the forum and was surprised no one else is talking about this hot new netbook. I figured I'd start the thread myself. I'll try installing both Ubuntu and UNR as soon as I can and see how it works out.
View 9 Replies View Relatedwhen i select try from the usb drive everything works fine, but when i select install it never goes further than the "preparing to install ubuntu-netbook" page all options (available space, power, and internet are all checked. it will stay on this page all day and i don't see any hard drive or usb drive activity.
View 1 Replies View RelatedIs there a substitute for Intrepid repos? I'm not able to access a few servers and don't want to upgrade the OS on this box.
Code:
Since the new Unity in Ubuntu 11.04 doesn't work with applets, like GNOME, I've lost an useful applet to choose the operating clock of my CPU as well as power profiles (Performance, Conservative, On Demand etc.).
I've looked into Ubuntu Software Center but couldn't find anything similar.
i've a asus eeepc with an Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) with Karmic Koala, my GLX version is 1.2 , is it possible to upgrade in some way to GLX 1.3??
View 3 Replies View RelatedUbuntu 10.04 on Asus Eee/901. I am in Italy running through the college network proxy. I have defined the system-wide proxy and everything looks good. However none of the Linux software packages update (Synaptic, Ubuntu centre and for that matter, Thunderbird) they seem to ignore the Proxy and its required authentication - needless to say, I cannot update/download important packages/updates. System Proxy seems OK because Firefox is working but that's the only one.
View 1 Replies View RelatedI have a ASUS M4A785D-M mobo, and have installed win7, I want to use the comp for a DAW with Ubuntu via downloading the Studio packages after install, but neither the live disc or wubi will show a picture on my TV, HDMI or DVI, no picture.
my TV does all res. upto 1080p. I have had Ubuntu on this TV before, but this time i'm a bit stuck... I also read to press f6 and put 'nomodeset', but if that doesn't work, how do i get the ingfx working via hdmi? i'll be back...
[Code]...
Greetings beloved Linux users. I had grown accustomed to using Ubuntu on my laptop for the longest time when a nasty virus screwed up my boot sectors on my HP Desktop. I finally bought a nicer computer with Windows 7 back in November of 2010, but I'm having difficulties trying to install Ubuntu onto it. Here are some specs:
Model: Asus CM5571 Desktop PC 64-bit
Processor: Intel Pentium E5400 / 2.7 GHz Dual-Core (yes, a Pentium)
RAM: 6 GB DDR3 SDRAM
Graphics: Intel GMA X4500 Dynamic Video Memory Technology 5.0
Sound Card: Intel HD Audio
I'll be willing to provide more if needed So, I started off trying to load the Ubuntu 10.04 CD I received from the free shipping service off of the Ubuntu website, and that would not boot. It seemed to hang after trying to scan my 500 GB external. So I unplugged that,rebooted, and it seemed to hang on my USB hub. I unplug that, rebooted, and it hangs after trying to making "calls" or something to devices. Not sure at all what is going on there.
I figured I might need a 64-bit edition so I go to the website and burn an ISO of Ubuntu 10.10 64-bit. The same thing happens. I then begin experimenting with the boot options (acpi=off, etc.) and none of that seems to work either. Out of desperation, I find an old 8.04 CD and try to boot from that. It gets past the loading bar but boots into BusyBox only.
I have gone through many threads but most of them have been dead for many time and I think there would have been a few advances in the Ubuntu software domain, so maybe a new downloader is up which manages downloads in a better way.Well, those who have used Internet Download Manager know that it is one of the best ones offered for Windows. It has many useful functions available in one single domain.
- It integrates to all browsers damn well, like charm.
- It can manage rapidshare, megaupload, hotfile and similar file hosting services very smoothly.
- It is a multi-threaded downloader which means that before starting to download file it breaks it up in many small pieces, and then downloads all fragments side by side, making the download very very fast, even on slower connections.
- It can also do very well with the websites which do not permit multithreaded downloading from their servers.
- It can take on video downloads from any page on the web which has a streaming video.
- It is very stable (if bought legitimately, which is not true in most cases ). But quite stable in even when not registered or cracked.
- Above all, it has a smart gui interface which provides interactive operations on downloaded files.
I have used many downloaders for Ubuntu and there has been some problem with each one. Some have a nice CLI structure but not GUI. Some of them are not multi-threaded. Some are multithreaded but do not allow pausing and continuing downloads (which actually does not satisfy the very definition of download managers). I haven't seen a single download manager which is GUI, multithreaded and well integrated to browsers all at the same time.What I want to know is, do my friends here at Ubuntu galaxy want to point out a real shiny star here which would make me forget the damn propriety software? Or if such a downloader hasn't been built yet, why not let's build one... Shouldn't be too hard especially if we have a model example (IDM 5.18 for Windows) in front of us... Well the algorithm must be simple, get address, verify the existence of file, break apart into several pieces and start downloading. I don't know how to implement this algorithm yet, but I am a quick learner and if a few expert programmers join me, we can do something that would remove one complain for most Ubuntu users.
Is there any software substitute for the Microsoft Expressions ? Recommendations ?
View 3 Replies View RelatedI've been fiddling with gnome3 quite a bit, several different variants, and something I've yet to find a solution for is a way to "inhibit" the screensaver and/or sleep features if watching a movie or such.In gnome2 I'd always just add 'inhibit-applet' to the panel, but I've so far found no substitute in gnome3.
View 1 Replies View RelatedI would like to install GD package on my ubuntu , but as my ubuntu is too old that many library is required to upgrade when install GD , is there other package is substitute of the PHP-GD ?
View 2 Replies View RelatedI have the following file:
Code:
1 line
...
49 test test=AA:AA:AA:AA:AA=0
I need to substitute on the line number 49, all text until =. I have used the following, but with no actual result.
sed -re '49s/^.+=//' file
and
sed -e '49s/.*[=]//' file
I had windows XP and Ubuntu installed on my Asus 1000HE and the hard drive is failing so I need to RMA it. They told me to restore it to factory defaults which I just press F9 at boot 3 time and Ghost takes over and reformats, creates 2 partitions and installs XP on one of the and the other is for another OS or just storage if needed.
I did that now I get a grub rescue prompt when I boot my netbook. Is there a way that grub installed itself to my PE partition that's a hidden partition that came with the netbook? I've taken the drive out of the netbook and put it into my desktop and formatted both main partitions but not the restore one. Yet I still get the grub rescue prompt, how can that be?? I can't even boot from flash drive or get to bios it just goes straight to the rescue.I need to send the netbook back but can't unless its restored. Right now I'm on the 9.10 live flash drive I made on my desktop and my only hard drive attached it the netbooks.
i bought asus eeepc 1005pe. Win 7 is already installed. So i want to have dual boot with ubuntu 10.04 64bit, but asus wont boot from any of my usb sticks (i made 2 bootable usb sticks). It recognizes them in bios, i seleceted sandisk as the first bootable device, but it always starts win 7.
View 4 Replies View RelatedI don't speak english very well so forgive my grammar errors ! Well, my problem is: I'm installing Ubuntu 9.04 in my netbook Asus 1000Ha EeePc. I'm installing that version because I had downloaded it some time before and I didn't want to download again.
I've created a bootable USB with UnetBootin from Windows XP. Installation is perfect until I try to create a new partition. I mean, I want a dual boot with Windows and I've edited a NTFS partition to get free space (30 Gb). This free space is not formatted. When I put the cursor on the free space, "New partition" button is disabled. That means, that I can't create swap or none of the required partitions I need to install ubuntu.
There is more, I used the same version of the installer in a CD when I installed Ubuntu in my desktop computer. There were no problems and installation worked! Now, I have 30 Gb of free space that Windows can't see... and I can't edit it for Ubuntu... Does anybody know how to solve this? I really want to install ubuntu because I need it for University.
When booting from the netbook USB, there are two wireless connection stages:
the first appears at the "TRY/INSTALL" selection screen, and after supplying the keyring password, the connection appears to succeed.
the second appears on the desktop, after selecting "TRY"; the keyring dialogue appears & seems to work, but then the network login dialogue pops up, and refuses to connect.
Both my Acer machines connect to the same AP under Maverick and the EEE PC works in Lucid.
I used this laptop since 8.4. When first 10.10 beta arrived I decided to upgrade as usual. all seemed to go well. At reboot the computer was hanging after grub, with a blinking cursor on top left. Then was turning off and had getting into a weird hung mode. Was not possible to start it over. The only solution was unplug, take battery off and wait for a minute. Now with the official 10.10 I decided to install it over. But the live CD start right after the first screen. Again with the blinking cursor and angs the machine again. Windows works perfectly as well as all Ubuntu, including 10.4
View 9 Replies View RelatedI can't get my Asus Eeepc 1005HA to boot from usb so as to re install Ubuntu. I did it right once - obviously - and now have a malfunctioning dual boot partition. My memory is of having to hit a function key repeatedly once I'd changed the BIOS and restarted the computer. Asus forums all repeatedly give me the same advice - F2 for BIOS, F10 to save settings then it should boot up, but --- nothing --- works.
So. Any additional or creative advice? The computer doesn't have a CD drive. My thumb drive is a Delkin 4gig... are there thumb drives known to work for this operation?
