I just recently installed Ubuntu 10.04. Every time I boot it up the screen flashes, like going off, then on again. It won't stop doing that. I can see the screen for 1 sec then it goes black, and keeps repeating this.
View 5 RepliesAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
After an aptitude safe-update my laptop doesn't boot any more.
I recorded the following video of the boot process: [URL] ....
The disk is fine (I ran fsck), GRUB in OK. Could it be X?
I can boot in safe-mode and also have internet connection, so not everything is lost ...
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies View RelatedI recently wiped and partitioned my hard drive on my Sony Vaio Z series laptop. I set up the NTFS partition for windows, the Ext-4 partition for Ubuntu 10.04 Netbook Remix, and a large NTFS partition for my all my media. I installed the netbook remix off of a flash drive, and I couldn't have asked for a smoother install. Everything went fine, and I proceeding to install google chrome and all the other little goodies. After that, I configured all my settings and ran the update manager to get everything just fine. After a reboot, I became frustrated and prevented maximus from running on start up because I did not want every windows I opened to be maximized. After a reboot, the screen would flash very brightly more than once per second. I could see the top bar with the processes and such as well as the correct background, but I cannot do anything because the screen will not stop flashing. I figured out I could stop it from flashing by pressing ctrl+alt+F7, but the screen just freezes where it is at and is still unusable. Desperate to start enjoying my Ubuntu Netbook Remix, I wiped the Ubuntu partition and reinstalled and did everything EXACTLY the same except instead of preventing maximus from opening, I used gconf-editor to change the setting to not maximize everything by default. Reboot, exact same problem.
I've searched everywhere for a solution, but I only find people with vague similarities or explanations. Could it possibly be a graphics problem? My laptop has 2 graphics cards in it - an Intel integrated one and an nVidia one. The nVidia one has a hardware issue so I just use the Intel one for now. It is also worth noting that I have installed Ubuntu 10.04 (desktop) on my machine before and I never had any such problem.
Also, I tried booting up in the "safe mode" equivalent, but I eventually encounter a black screen and I am forced to hold down the power button to shut it down.
(also, if it's worth anything, I know how to use windows well if there's any way I can change something in Ubuntu from my windows installation)
when I install them all goes well but when I get into the GUIs I can hardly press anything - major bug with mouse and it is really annoying. Secondly there is a big gap between the GUI and my screen's edge. Hmm, I think - it must be a problem with the GPU driver and that might be the thing also messing with the mouse clicks. I download the drivers provided by the Ubuntu community - all goes well and I restart - stuck at purple screen after the "moving dots" on boot. So I reinstall the whole OS and try with the drivers provided by NVIDIA - same thing. I try the same procedure with Kubuntu and no progress.
View 2 Replies View RelatedRunning 10.04 as the only OS on a HP desktop - been running fine for months. Did an update - probably hadn't done one for a couple of months - may be a red herring. The system appeared to crash while inactive. Trying to boot - I get the Ubuntu 10.04 screen for a short while then it goes to blank screen with a flashing cursor at the top - occasionally it will give me an error that /home is not ready - skip or manual fix. I have sda1 = ext4 root
sda2 = swap
sda3 = ext4 home
sdb1 = ntfs
I removed sdb1 from fstab as initially it was complaining about this drive not being ready. The error switched to complaining about /home. I am able to mount both of those filesystems with no problem manually. I ran mke3fs on /home (I forgot the -n parameter! but no problem as I have good backups) - same error - complains about /home not being available at boot even though I can always manually mount it from live cd or manual recovery. I can rebuild this system - and I may as it was upgraded from 9.10 - I may do a fresh 10.04, but I would like to fix the boot problem in case something like this happens again when I actually care about fixing it.I recreated the grub2 configs - I don't have the command to hand, something like: sudo update-grub --root-directory=/mnt/boot/grub /dev/sda
I have just recently installed Linux Lime along with windows 7 Home Premium. Before, there would be a menu asking me which operating system I would like to use. When I click linux it goes to linux and windows 7 goes to windows 7. Now when I click Linux, the black screen you get at the beginning shows a - (dash) constantly flashing on a black screen and won't boot to linux. This is normal as it does that for a second then boots. Now its stuck on that flashing dash on a black screen and won't boot.
View 1 Replies View RelatedI deleted both the partition with archlinux and the swap in order expand the windows xp partition. I am now unable to boot, just as gparted warned me. When I turn my computer on, it just goes to a black screen with a flashing underscore.
I cannot type anything, but cntrl-alt-dlt does restart. I have been attempting to restore grub and/or windows's boot method for the last 24hrs. The main things I've tried were the instructions here and using super grub disk. However, I have not been successful. I am running an Ubuntu live disk. At the moment, I just want to be able to run windows, but do not have an xp disk because this laptop was issued from my old college.
I've just downloaded and installed Ubuntu 11.04 (amd64) and every time I boot i get a flashing screen. I didn't have any problems at all with the LiveCD. The graphics card and my wireless adapter worked out of the box. But after the install it won't work. I can choose the OS in GRUB and then there's a purple screen. After that the screen starts flashing and I can hear the login sound.
I have tried using "nomodeset" but that didn't work either. There is no flashing, just a purple screen all the time. But it was possible to enter tty. I also tried booting the Recovery Mode but it just loads and then a pink flashing screen appears.
The graphics card is a XFX Radeon HD6870 1GB.
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
I have just wiped my whole hard drive to install a fresh copy of Ubuntu on it, and now as soon as i power it up it passes the POST screen and black screen shows up with a flashing cursor. I bliv it should say no operating system and pick the USB which has Ubuntu installation on it.I have formated the hard drive to NTFS, the system is Samsung NC10.
View 9 Replies View RelatedJust installed Ubuntu 9.10 side by side with XP. When trying to run ubuntu from Grub the terminal screen opens but then starts to flash. This makes it difficult to type and login. When I do eventually login it just goes no further than a terminal prompt.If I use recovery mode the screen does not flash but still cannot get to the desktop
View 2 Replies View RelatedWhen I try and install Ubuntu 9.10 it gets to the flashing Ubuntu logo, then the screen just goes black. It then says: (initramfs) Unable to find a medium containing a live file system. I also tried the disk on a another computer and it worked fine, and I've installed Ubuntu 7.10 on this computer before without a problem.
View 9 Replies View RelatedI installed Ubuntu 32-bit v. 10.10 on a Dell Optiplex GX270, after installation i had to reboot, but then when rebooting it just goes to a black screen with a flashing
View 1 Replies View RelatedI'm having this problem with Ubuntu 9.10, it has happened the three times I have tried to install it.
I have made a video showing the problem: [url]
After upgrading and rebooting, the flashing login screen appears and it is not possible to use the GDM.
I have tried to install KDM and it works, but when trying to load gnome I get the blinking bars again.
I have also tried this (and got the same problem); installing the Nvidia driver (manufacturer), installing the Nvidia driver (repositories) and installing no screen driver.
I think the problem is with GNOME, and not with the graphics card.
Now I have installed windows xp :-/, for the first time in a whole year, cause it is not possible for me to use Ubuntu 9.10 at all.
I've just installed ubuntu 9.10 from a live cd on to a 2nd HDD, with vista on the 1st. When I turn my PC on GRUB comes up and I can select ubuntu or vista, vista works but when I try to boot ubuntu the screen goes black with a small flashing underscore in the top left and then just goes completely black, nothing else happens after this. I've tried reinstalling from the live cd but when I go install nothing happens and the screen goes black again. When I was installing I changed the boot to something like scsi?
My PC's specs are:
Dell inspiron 531
HDD1: Ubuntu(300GB)
HDD2: Vista(1TB)
OS
Windows vista
Graphics card.
ATI radeon HD 4700 series
CPU
AMD Athleon 64 x2 6000+
Mainboard
Manufacturer : Dell
Model: 0RY206
BIOS: dell 1.0.13
I can't get Ubuntu 9.10 to install... I downloaded ISO image from official web, Then I burn it on blank CD-R using lowest speed available from Nero 6, After that I go to BIOS and change that CD-ROM will boot first; Done. After that i reboot with CD-R, and it boots! Yea!, I press "Install Ubuntu", it goes to black screen with flashing Ubuntu logo at middle of it, After 1-2 minutes i turns black, ouch!, I press "Enter", and there is a error message, something like this...
[Code]...
i am trying to instal kubuntu 9.10 on my desktop. i have an ati radeon hd 4600 with a hdmi cable going into the 22" lcd. The problem is i cant view the whole desktop, like i can only see a part of the corner, and all of the icons are massize. The search bar at the bottom comes to half my screen size, making installation impossible to see. Plus i can only use live cd mode using safe graphics mode. i am new to linux finding this quite confusing.
View 1 Replies View RelatedI recently installed Ubuntu 10.04 on my Aspire One netbook, but everytime while booting, I am stuck at a blank screen with a blinking cursor. I've tried reinstalling but to no help. I've also tried installing 9.10, which will boot, then upgrading to 10.04 which then produces the same problem.
View 5 Replies View RelatedI have a desktop with AMD Sempron 3000+, 1.2GB RAM, VIA S3G Unichrome Pro IGP, VIA SATA RAID controller based disks, PS/2 mouse and keyboard running Windows XP. Wanted to move to years ago favourite (linux based systems), I downloaded Ubuntu 10.04 for i386 and am trying to install both using CD as well as USB. After the Ubuntu start-up menu for installation, I select install Ubuntu option, turn off 'quiet' so that I can see what happens. The screen goes blank dark with a flashing cursor at the top.
In the kernel messages, the see that it has detected the processor, set the clock, assigned the PS/2 keyboard to input3 and then says:
[1.911624] isapnp: no plug and play device found
After this, the system hangs. Keyboard doesn't work.
became immediate to me is that the docks on the top and left sides of the screen lack icons.On top of that, when you hover over where I suppose icons should be, the black tooltip that comes up is labeled with a white rectangular block instead of telling me what the icon represents. It looks as if the applications function fine regardless of this phenomena; I can click on different parts on the dock and the icons' links still pull up the program with no issue.
Opening up Firefox, however, led to the screen flashing a colorful pixelated pattern that looks like what happens to an image when you take it into Photoshop and run it through a coarse mezzotint filter. It flashes occasionally while using Firefox, both around the window, on top of the window, and on the entire screen. I've also found that I can't run Firefox for more than five-ten minutes without the system freezing on me (mouse won't move, screen doesn't change).
After installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
View 9 Replies View RelatedDespite being warned from a friend of mine who works for Intel that the new version of Ubuntu 11.04 sucked? I upgraded from 10.10 which worked perfectly fine and did everything that I wanted it to except work with my COBY MP3 player which is what I hoped 11.04 would do. It all worked great until I rebooted. I previously had the main screen on the left where all of the menus are and the right screen was the 2nd monitor.
Once it rebooted it let me login and loaded the desktop but the main screen is now on the right with that stupid application bar going up the side, all of my folders, etc. are all there but NOTHING is clickable, even the icons up in the right corner where you logout, etc. will not do anything other than highlight that you have clicked on them, the hard drive light flickers for a few moments then nothing.
Also the left hand screen is completely blank unless I move the mouse cursor through it. If I just leave the computer sitting there eventually the screens go dark and the monitor lights start flashing like it is supposed to but if I wiggle the mouse the screens come back on and the mouse is there but there is no login prompt to let me log back in. Pardon my French but this OS is a piece of <bleep> and sucks just like I was told.
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
View 8 Replies View Relatedi thought i would give ubuntu 10.04 a try. So i downloaded the iso twice from two differant sources and burned to 2 diff dvd with diff burners and get the same problem. When i boot off of the disk i get the menu but whether i choose install are run live cd it just sits there for a sec are 2 then goes to black screen with flashing white bar in upper left hand corner and thats all it does. even tried my 9.10 disc which i know works. but it does the exact same. I have purchased a new video card since i last ran ubuntu and its the nvidia gtx 260 core 216. would that be whats causing my problems?
View 1 Replies View RelatedI had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found.
So I used TestDisk again to recover them, this time it was successful. The problem now however is that when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it?
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
[code]...
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
was trying to get rid of the ubuntu menu and try to change how the desktop looks. It's hard to explain but it was first the desktop you get when you first start up ubuntu on NetbookThen I somehow turned in into a desktop esque menu. With all the icons and stuff. Today my battery accidentally fell out as I moved it around and when I restarted my computer all went fine until the screen started flashing. On the upper right hand corner, was a transparent square with 2 arrows when it flashes. It still showed that I connected to my wireless and etc.
View 2 Replies View Related