Ubuntu Installation :: 11.04 Does Not Boot On HP ProBook 4525s?
May 17, 2011
I have a laptop HP ProBook 4525s. First when I got it I installed Ubunu 11.04 and it worked fine until I pressed a wifi disable/enable button. After this system just stoped. Then I tried to use my backup but it didn't help, system did't boot. So, I decided to boot from live CD Ubuntu 11.04 to install the new system but it also didn't boot, just stoped at Ubuntu purple picture screen. The same situation with USB drive. Then I thied to install Ubuntu 10.10 and it worked well, so, I tried to upgrade it to 11.04. After all installation and cleaning were complete I rebooted my computer and got the some result as with live cd: system just stops booting at ubuntu purlpe screen and nothing happening.
I have a new HP ProBook 4510s, which will probably not run Win 7 which came with it. grin).So I figured I'd image the disk. Clonezilla won't boot. I tried with several CDs. Slax does boot. Ultimate boot CD boots.
I'm having some problems installing Ubuntu 10.04 64 bit on my laptop - I tried first using the CD but selecting 'Install Ubuntu' from the menu did nothing at all so I'm using wubi instead. The initial wubi install was fine but attempting to boot into Ubuntu initial setup results in lock up. Booting without the graphic workaround option gets as far as: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xC0000000.However with the workaround it gets further and the final log output is:set up 63M of stolen space.
I got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
I have an HP Probook 4520 with Ubuntu installed, but I can't get the wireless setup. I run the hardware driver search and it does not find the bluetooth. I tried download nsdistgk driver, but at the end I couldn't find the .inf file.
I'm using Ubuntu 10.04 LTS on my HP ProBook 4510s.[URL]... On Windows XP, the battery usually lasts me over 4 hours but on Ubuntu it barely last 2 hours. How can I reduce power consumption and prolong battery life while running Ubuntu on my laptop?
I have done a clean install of Ubuntu 11.04. My HP ProBook 4520s notebook computer exhibits the following problem. I use the notebook with lid closed, connected to Samsung SyncMaster P2350 23" LCD Monitor. When Ubuntu boots it selects 1024 x 768 resolution. I then go into the display settings and notice that it is set to display the same image on both monitors. If I uncheck this setting, I see the Samsung and can make changes to the resolution settings of both laptop monitor and Samsung monitor, however, when I click Apply, the Samsung I am viewing goes blank. If I then open the laptop lid, it too is blank. After a cold reboot, I am able to get the Samsung monitor to act as a desktop estension perfectly, but not as the only monitor with the laptop screen turned off. Any attempt to turn off the laptop monitor in the settings results in no screen at all.
In the office, I have an LG 19" Flatron monitor, and Ubuntu does not exhibit the same problem. I can boot up with lid closed, and the Flatron works fine as the only monitor and at it's native resolution all by itself. Booting with lid open, and then closing the lid, also results in the Samsung going blank, but probably for the reason that there is no option in power management to DO NOTHING when the Lid is closed.
It seems that Ubuntu have forgotten about people who use their laptops as desktops in this way. I am not happy to run with the laptop open and split screens, as I cannot get the launcher into the Samsung, and everything has to be moved over all the time, is there any work around that anyone may know about?
The HP ProBook uses Intel Graphics, for which there are no particular additional drivers I am told. The problem also happened in Ubuntu 10.10, but before 10.10 I don't recall ever having this problem (from 7.04 thru 10.04)
I have a SATA boot disk with LILO installed. This disk is kinda like a recovery disk in that its supposed to boot up on any x86 PC. I'm however having trouble getting it to boot on a HP Probook laptop. I get the LILO 99 99 99 ... problem upon bootup.
I've already specified the linear option in my lilo.conf, which according to the LILO error codes might fix the problem but didn't.
Quote:
0x99: Invalid Second Stage
Mismatch between drive and BIOS geometry, or a bad map file. Some evidence that LINEAR needs to be set on the disk (see LiloNotes)
I've tried specifying the lba32 option instead, but get the same problem.
I've tried the solutions at this LILO Error Codes wiki, i.e. lilo -g and lilo -M /dev/sda
Neither solution worked.
Does anyone know how to get this working? Or recommend another BIOS independent boot loader? I was using nuni in the past for my IDE version, but nuni doesn't support SATA drives.
fyi I'm booting up the disk and running LILO on another laptop that boots it up, before plugging it into the Probook to test.
I am trying to get the wireless working on a fresh install of F13 on my HP probook 6450b. The wireless button above my keyboard is amber, when I press it i see the following in /var/log/messages :Quote:ep 29 11:32:43 localhost kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).Sep 29 11:32:43 localhost kernel: atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I'm running 9.10 off of a 4 GiB CF card. I keep running into space issues with updates, so I purchased an 8 GiB replacement card. I've cloned the 4 GiB card to a .IMG file using DD.I've then copied the 4 GiB image back to the 8 GiB card using the Ubuntu startup disk creator program. Once done, I'm able to properly boot off of the new 8 GiB clone.Unfortunately, the clone ends up with 3.67 GiB of unallocated space at the end *see attached). I tried deleting the "extended" partition that the swap is located at after booting from a Live CD and the system was unable to boot after this. I was thinking that I would delete the swap entirely and create a swap file after I merged the existing partitions, but I was unable to do this.
best way to do this (e.g. get one large 8 GiB partition with my old image on it)? I still have the original untouched 4 GiB card and also have an external CF drive if I need to redo the cloning. I've also used Clonezilla before, so perhaps there's a way to do this that allow me to grow the image as it's being cloned.
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
Installed ubuntu 10.4 over previous ubuntu on Intel 945G. After installation and reboot the system does not boot: "no bootable device - insert boot disk and press any key".
Installation was done from USB-stick, prepared by UNETBOOTin. I have two HD's, one used for system + storage, another one just for storage. I manually deleted previous system partitions of previous ubuntu install in system HD. The system HD had about 1/3 of free and unallocated space for system partitions, which ubuntu installer created during the installation.
I tried to reinstall grub from bootable USB-stick and it succeeded but it did not help. The system is still not bootable.
I have used ubuntu for years and never happened something like this. Am I missing something or is ubuntu missing something???
HW failure is ofcourse possible but I am quite skeptical about it because Live ubuntu from USB-stick works well.
I'm trying to install Ubuntu on a computer with Vista SP2, my BIOS supports booting from a USB drive. Ive used unetbootin and Universal USB installer to setup the ISO on the drive, as well as trying Ubuntu version 10.04 and 9.10. The problem is that during the boot it stops at a line reading "SYSLINUX 3.86 2010-04-01 CBIOS Copyright ...", no error messages, it doesn't appear to be frozen as there is a blinking cursor under this line. The boot performs normally up to this point, it happens when, during a normal boot to vista, it says "boot from CD/DVD" then loads windows.It shouldn't be a hardware issue, the computer is pretty new, and I had an older version of Ubuntu install on it temporarily.
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
I installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement 147 GB for Windows, C: 85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
Can Ubuntu install and boot from external HD while still booting windows off internal HD?In an attempt to spread Ubuntu my friend wants to use ubuntu off an external HD and still have windows fully operational on the internal HD. Questions:1) Can Ubuntu install on external HD without tricky mounting methods and if so how doabout it?2) The bois have the capability to boot from usb, will grub work?
