Red Hat / Fedora :: Configure GUI With RHEL 5.5 On HP ProBook 4520s?
Oct 3, 2010Not able to configure GUI with RHEL 5.5 on HP ProBook 4520s
View 2 Replies
ADVERTISEMENT
Ubuntu :: Install Of 11.04. My HP ProBook 4520s Notebook Computer Exhibits?
May 7, 2011I have done a clean install of Ubuntu 11.04. My HP ProBook 4520s notebook computer exhibits the following problem. I use the notebook with lid closed, connected to Samsung SyncMaster P2350 23" LCD Monitor. When Ubuntu boots it selects 1024 x 768 resolution. I then go into the display settings and notice that it is set to display the same image on both monitors. If I uncheck this setting, I see the Samsung and can make changes to the resolution settings of both laptop monitor and Samsung monitor, however, when I click Apply, the Samsung I am viewing goes blank. If I then open the laptop lid, it too is blank. After a cold reboot, I am able to get the Samsung monitor to act as a desktop estension perfectly, but not as the only monitor with the laptop screen turned off. Any attempt to turn off the laptop monitor in the settings results in no screen at all.
In the office, I have an LG 19" Flatron monitor, and Ubuntu does not exhibit the same problem. I can boot up with lid closed, and the Flatron works fine as the only monitor and at it's native resolution all by itself. Booting with lid open, and then closing the lid, also results in the Samsung going blank, but probably for the reason that there is no option in power management to DO NOTHING when the Lid is closed.
It seems that Ubuntu have forgotten about people who use their laptops as desktops in this way. I am not happy to run with the laptop open and split screens, as I cannot get the launcher into the Samsung, and everything has to be moved over all the time, is there any work around that anyone may know about?
The HP ProBook uses Intel Graphics, for which there are no particular additional drivers I am told. The problem also happened in Ubuntu 10.10, but before 10.10 I don't recall ever having this problem (from 7.04 thru 10.04)
Red Hat / Fedora :: Configure A Dhcp Server On RHEL 5.3 Or 14
May 1, 2011i'd like to configure a dhcp server on my RHEL 5.3 or Fedora 14, since i don' have a legitimate DNS server....n it asks for option domain-name " "what do i put in there.. me got two nics for my WAN(dhcp enabled) n LAN...i just want to parctice at home for my future job...
View 3 Replies View RelatedFedora Hardware :: Unable To Find Wireless Driver For Hp Probook 6450b?
Sep 29, 2010I am trying to get the wireless working on a fresh install of F13 on my HP probook 6450b. The wireless button above my keyboard is amber, when I press it i see the following in /var/log/messages :Quote:ep 29 11:32:43 localhost kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).Sep 29 11:32:43 localhost kernel: atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it
View 9 Replies View RelatedRed Hat :: Configure LVM In My RHEL 5?
Oct 16, 2010Can I configure LVM in my RHEL 5 after I installed linux ? I have heared that it is only possible in GUI installation of Linux.
View 3 Replies View RelatedRed Hat :: Configure Nginx Under RHEL 5
Sep 3, 2010I just want to try using NGINX as reverse proxy for POP3 and IMAP. Does anyone know how to configure it ?
View 7 Replies View RelatedHardware :: Configure RHEL-5 For USB Connection?
Feb 15, 2010Can anybody suggest me how to configure my RHEL-5 for USB internet connection(if u r in India, I want to configure AirTel USB internet connection) ??
View 1 Replies View RelatedNetworking :: Configure DDNS On RHEL 5?
Feb 5, 2010I have setup dns on my rhel 5 server. It is working fine. My dhcp server is setup on my sonic firewall. The sonic firewall hands out our IP addresses. My dns server sees the static IP addresses but how do I get name resolution setup for dhcp?
View 1 Replies View RelatedGeneral :: How To Configure Sendmail In RHEL 4.6
Oct 18, 2010I am on Red Hat Enterprise Linux AS release 4 (Nahant Update 6). I need to configure Sendmail in my Linux Server.
1. edit /etc/mail/sendmail.mc
dnl #
dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
dnl DAEMON_OPTIONS(`Port=smtp,Addr=172.16.10.6,Name=MTA')dnl
dnl #
2.rebuild /etc/sendmail.cf from the revised /etc/mail/sendmail.mc thus:
m4 /etc/mail/sendmail.mc > /etc/sendmail.cf
3. Edit /etc/sysconfig/sendmail
DAEMON=yes
QUEUE=1h
4.And restart sendmail
cd /etc/mail
make
service sendmail restart
5.sendmail -v abc@gmail.com
Its working but going to spam and more thing. I am not able to send to our company id..
sendmail -v abc@rbs.com
General :: Configure Sendmail On RHEL 4.6
Sep 29, 2010To configure sendmail on my linux system.
View 2 Replies View RelatedServer :: Configure One RHEL With DNS And DHCP
Jul 30, 2010I have installed RHEL 5.1 in VMWare 6 I want to configure one RHEL Server with DNS & DHCP Also I would like to PXE boot, whenever I create a new VMWare Client(RHEL), the installation should be initiated via network boot
View 2 Replies View RelatedServer :: How To Configure Bind On RHEL 5
Mar 3, 2011I am a newbie in configuring linux servers. Can I have an easy step-by-step walkthrough for bind 9 with chroot on RedHat enterprise 5 .
View 3 Replies View RelatedServer :: How To Configure DHCP In RHEL 5
Jul 5, 2010here to learn some good technical stuffs
View 6 Replies View RelatedGeneral :: How To Configure Hyper Terminal In RHEL
Mar 16, 2010I have a hardware design which is completely tested and verified on windows OS. My hardware is connected to hyper terminal. Whenever I give a command from hyper terminal then my hardware will response in what way I need. As I am new to linux os I don't know how to open or how to configure hyper terminal in linux. I stopped my work completely.
View 1 Replies View RelatedGeneral :: Configure Yum Server On Rhel-5 Without Use Of Internet?
Jan 17, 2011WITHOUT USE OF INTERNET ,how can i configure YUM server on RHEL-5
View 1 Replies View RelatedGeneral :: Need Procedure To Configure Samba On RHEL 4
Jan 25, 2010I need procedure to configure samba on RHEL 4
View 1 Replies View RelatedServer :: Configure DNS In RHEL 5.3 To Resolve Domain Name?
May 2, 2010I would like to configure DNS server in RHEL 5.3 to resolve domain name. Do you have step by step procedure or automated script to configure the dns server?
View 2 Replies View RelatedGeneral :: Configure RAID 1 Within TWO HDD In RHEL-5 During Installation Moment?
Dec 14, 2010I wanna configure RAID 1 within TWO HDD in RHEL-5 during installation moment .I have the following questions regarding software raid vs hardware raid :
1) What is the basic difference between hardware and software raid
2) In software raid , If I use two HDD as RAID1 , then if one HDD is failed , can I boot it from another HDD ?
3)In software RAID , Between two HDD , If One HDD is failed then if I remove bad HDD and add a spare HDD then is it automatically synchronized with FIRST HDD ?
4) In software raid is it possible to keep '/boot' partition in two HDD (I use 2 HDD as RAID1) as separate partition ?
5) Finally is there any documnets or sites where I get software raid configuration during INSTALLATION moment in using GRAPHICAL mode , plz give me the address.
5 :: Configure RHEL To Use Packages From CentOS Extras Repositories?
Sep 24, 2010Can I configure RHEL to use packages from the CentOS Extras repositories?
View 6 Replies View RelatedNetworking :: Access / Configure Internet In ( RHEL 5) With Dell Studio 15
Aug 12, 2010I am using DELL Studio 15, Windows Vista Home Premium. I have a dual boot of Linux (RHEL 5). My question is how to configure Internet access in my PC in LINUX OS. Windows mode :
how do i access Internet :
I insert a LAN cable to my laptop and access internet. or I insert the cable to my wifi router and access it wireless whenever I am bit far away. RHEL 5.0 Linux 1) UNABLE to access internet when I connect the lan cable to my laptop. 2) Is there any way i can access internet or should i use any drivers that are provided my dell pc. I am very new to linux and i am not sure to which and how to use it.
General :: Configure Yum Locally - Yum.repos.d/rhel Debuginfo File?
Aug 8, 2011i was trying to configure yum locally, can i copy files to any other location other than /var/ftp/pub. how to configure yum.repos.d/rhel debuginfo file.
View 2 Replies View RelatedSecurity :: Configure RHEL 5.5 Syslog To Accept SNMP Traps?
Jul 14, 2010Is it possible to configure the RHEL 5.5 syslog to accept SNMP traps? That is I want to use a central logging server to pick up other systems syslogs, and SNMP messages from systems that cannot use remote syslog functions.
View 3 Replies View RelatedSlackware :: Hp Probook 4321s - Cpu Fan Is Always On
Oct 5, 2010My system is slackware 13.1, acpid is running, in /etc/rc.modules all acpi field turn on, the cpu fan is always on, but in WinXp is good.
View 4 Replies View RelatedRed Hat / Fedora :: Upgarde RHEL 5.2 To RHEL 5.3 (both 64 Bit)?
May 14, 2010My current Linux Version:
#more /etc/redhat-release
Red Hat Enterprise Linux Server release 5.2 (Tikanga)
OS Bit is :
#uname -a
Linux <hostname> 2.6.18-128.1.16.el5 #1 SMP Tue Jun 30 06:45:51 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Now i want to upgrade to RHEL 5.3 (ie)Red Hat Enterprise Linux Server release 5.3 (Tikanga).
Red Hat / Fedora :: Upgrading RHEL 4.8 To RHEL 5.5?
Nov 3, 2010Can we upgrade RHEL 4.8 to RHEL 5.5?
View 3 Replies View RelatedUbuntu Networking :: No Wireless For HP Probook 4520?
Nov 20, 2010I have an HP Probook 4520 with Ubuntu installed, but I can't get the wireless setup. I run the hardware driver search and it does not find the bluetooth. I tried download nsdistgk driver, but at the end I couldn't find the .inf file.
View 1 Replies View RelatedUbuntu Installation :: 11.04 Does Not Boot On HP ProBook 4525s?
May 17, 2011I have a laptop HP ProBook 4525s. First when I got it I installed Ubunu 11.04 and it worked fine until I pressed a wifi disable/enable button. After this system just stoped. Then I tried to use my backup but it didn't help, system did't boot. So, I decided to boot from live CD Ubuntu 11.04 to install the new system but it also didn't boot, just stoped at Ubuntu purple picture screen. The same situation with USB drive. Then I thied to install Ubuntu 10.10 and it worked well, so, I tried to upgrade it to 11.04. After all installation and cleaning were complete I rebooted my computer and got the some result as with live cd: system just stops booting at ubuntu purlpe screen and nothing happening.
View 9 Replies View RelatedGeneral :: LILO Can't Install Properly On HP Probook
Jun 14, 2011I have a SATA boot disk with LILO installed. This disk is kinda like a recovery disk in that its supposed to boot up on any x86 PC. I'm however having trouble getting it to boot on a HP Probook laptop. I get the LILO 99 99 99 ... problem upon bootup.
I've already specified the linear option in my lilo.conf, which according to the LILO error codes might fix the problem but didn't.
Quote:
0x99: Invalid Second Stage
Mismatch between drive and BIOS geometry, or a bad map file. Some evidence that LINEAR needs to be set on the disk (see LiloNotes)
I've tried specifying the lba32 option instead, but get the same problem.
I've tried the solutions at this LILO Error Codes wiki, i.e. lilo -g and lilo -M /dev/sda
Neither solution worked.
Does anyone know how to get this working? Or recommend another BIOS independent boot loader? I was using nuni in the past for my IDE version, but nuni doesn't support SATA drives.
fyi I'm booting up the disk and running LILO on another laptop that boots it up, before plugging it into the Probook to test.
General :: HP Probook 4510s Won't Boot Clonezilla?
Aug 12, 2010I have a new HP ProBook 4510s, which will probably not run Win 7 which came with it. grin).So I figured I'd image the disk. Clonezilla won't boot. I tried with several CDs. Slax does boot. Ultimate boot CD boots.
View 7 Replies View RelatedDebian :: Bluetooth Not Working - Jessie On HP ProBook G2 Laptop
Jul 4, 2015I've installed debian stable (Jessie) on an HP probook g2 laptop, but bluetooth isn't working.
Code: Select all/etc/init.d/bluetooth restart
gives in /var/log/syslog:
Code: Select allJul 4 12:02:35 mypc bluetoothd[5043]: Bluetooth management interface 1.6 initialized
Jul 4 12:02:35 mypc bluetoothd[5043]: Sap driver initialization failed.
Jul 4 12:02:35 mypc bluetoothd[5043]: sap-server: Operation not permitted (1)
Jul 4 12:02:35 mypc bluetoothd[5043]: hci0 Load Connection Parameters failed: Unknown Command (0x01)
Jul 4 12:02:35 mypc pulseaudio[1197]: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.Manager" doesn't exist
