Ubuntu Installation :: 10.4 32-bit Freezes After The Partition
Jan 31, 2010
I have been trying to install Ubuntu for about 2 days now. First I downloaded and burnt to a Disc Ubuntu 10.4 32-bit i386, the process of booting into the Live CD would freeze the computer. So....I downloaded the alternate install of the same Distro/etc. I have deleted all of the partitions to create the Free space on the hard drive then use the "guided" option for installation. Ubuntu partitions the ext4 and the swap space, but freezes at a blue screen right after and does not proceed with the installation.
I read somewhere that it is possible if there was ever a RAID configuration that there is possibly some META data left over on the Hard drive that needs to be erased. If this is the case I believe I have the command that will do so....BUT I do not know how to get to a terminal from the alternate install CD....is it possible?
I have been trying to install Ubuntu for about 2 days now. First I downloaded and burnt to a Disc Ubuntu 10.4 32-bit i386, the process of booting into the Live CD would freeze the computer. So....I downloaded the alternate install of the same Distro/etc. I have deleted all of the partitions to create the Free space on the hard drive then use the "guided" option for installation. Ubuntu partitions the ext4 and the swap space, but freezes at a blue screen right after and does not proceed with the installation.
I read somewhere that it is possible if there was ever a RAID configuration that there is possibly some META data left over on the Hard drive that needs to be erased. If this is the case I believe I have the command that will do so....BUT I do not know how to get to a terminal from the alternate install CD....is it possible? If so how do I get there?
Sometimes it does this and other times it does not. It has happened with 2 hard drives. When it formats the partition the bar stops and the mouse pointer graphics stops.
I downloaded the ISO from the Ubuntu site. I can run it from the CD without any problems however, when I install it, it freezes. I am installing on a 2nd hard drive in my computer. It gets up to the point of "Creating ext4 file system for / in partition #1 of SCSI1 (0,1,0)(sdb)... I've tried deleting the partition and creating one by myself with no prevail. I am going to school for computer networking and my counselor told me that it'd be a good idea to learn the Linux OS for my major.
I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?
Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?
I am a brand new ubuntu user, heard lots of good things about it so thought I would give it a go on my laptop. However, I have tried installations of Ubuntu 10.04 (notebook version) and Xubuntu. Yet on both attempts to install the OS it has stalled at the "Setting up the clock" dialogue box, it just sits at 0% and remains frozen (mouse still moves etc but nothing happens).
I really want to give Ubuntu / Xubuntu a go and my forum trawling has brought nothing to light so far.
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
I tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
I am having difficulty installing Ubuntu on a new PC. Hardware is thus:MB: ASUS M4N68T-MCPU AMD Phenom II 3.2 GHzMem: Kingston 2GB DDR3-1800HDD: Seagate Barracuda 80 GB SATAvideo is on-board, cannot find the details regarding chipset.I have tried both 7.10 and 10.10 (would prefer to use 7.10) but both versions hang at the same point during installation.Live mode works fine on both versions.Tried burning 7.10 to CD at 4x write speed.Set MB bios "Plug and Play OS" to yes.When it hangs, the mouse freezes, then the video wigs out (think Van Gogh on acid) and only a hard power down will un-freeze it.
I'm a complete noob trying to install Ubuntu Server 10.10 on my first build for use as a file/media server.When I get to the step to partition the drives, the installation freezes. The screen says "Starting disk partitioner" and the progress bar stops at 45%. It has done this three times now, and the longest I waited for it before rebooting was over an hour.I am installing from a flash drive containing the .iso file, and I have the following hardware (in case that matters): asus p7h55-m pro mobo, core i3-540 CPU, 2x4GB ram, WD caviar green 1.5TB, WD caviar green 1TB, and Kingston 8GB SSD.
I currently have both Ubuntu 9.10 and Windows XP installed on my PC. I want to remove the Ubuntu partition and leave the Windows partition. The question that I have is that when I remove it, Grub will go with it. Will that mess up my Windows partition?
What I need to do is remove Ubuntu and add the hdd space back to the other partition. I just don't want Grub's absence to keep me from being able to load Windows.
I am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
I am not really sure if the title makes any sense or if it even possible. Basically I am currently triple booting with Mac osx on the first partition windows 7 on the second and ubuntu linux on the 3rd with a swap partition. So basically on my 2TB harddrive
Mac (200gb) Windows (200gb) Linux (200gb) Swap (8gb) NTFS(1592gb)
The last partition is formatted as ntfs using Gparted, windows cannot detect it. The windows disk partitioner shows the swap and ntfs partitions as unformatted. I can unformat the space and use the windows partition to add format it as ntfs but it would format the linux swap partition as well. I am worried that it could potentially screw up everything on my harddrive. My question is. What do I need to do to get the ntfs parition recognized by windows (should I use the windows partitioner)?
I basically want to transfer my wubi ubuntu 10.04 installation from a virtual partition to a real partition, i have seen some guides but they are years old. I was wandering if someone could give me a tutorial or guide to follow, or at least link me to one that will work for lucid
I have an external 320gb Hard drive. My plan was to have 250gb for My Documents of mainly music, films and word documents. And 50gb set aside for ubuntu, in a separate partition.To do this I need to partition the 50gb partition as ext4? then add a swap file of how big? Do i even need a swap space if I have 4gb of physical RAM?
creating a new partition when i have only primary partition on my 40gb harddisk.
what i did while installation was selected use entire partition and now i want a additional partition other than primary ?
I want to assign 10GB for Primary one and wanna create Two 14GB partitions , I Also dont know what Swap partition Is.
Since i am a month old ( January 2011 ! ) UBUNTU user who hates MS Windows now, if i gets this problem solved , i can convince more people to replace their OS to Ubuntu .
I have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
I dual booted my windows 7 with Ubunto 10.04 and it said it successfully installed. I booted the ubuntu and it freezes on th Ubuntu image with the message( i didn't copy the message). i rebooted and freezes again on an image after the Ubuntu Image.So itried recovery mode and it worked. i always use recovery mode to use ubuntu.
I got a new hard disk for my laptop and I want to move my Gentoo installation from old HDD to new.
Most simple guides recommend use of dd to copy the whole partition byte by byte.
I'm moving to the new drive because I don't have enough space on the old drive, so I don't want to simply clone the partition. Instead I need the destination partition to be bigger. Would dd work well in that case?
Assuming that I use same partition types on the new drive, would I be able to use simple cp with appropriate settings?
I'm new to the Debian, but not to Linux. I've previously used Ubuntu for a few years, so I know something about how a successful installation should look like. I'm currently using Windows 7.
I downloaded the debian-6.0.3-amd64-gnome-netinst.iso from [URL] ...., and then made a USB pendrive using the Windows version of Unetbootin. The MD5 sum for the .iso-file was the correct one, b663727d7f5b572c329cea8e2ff5e29c.
I used the usual non-graphical setup, without any special options. The installation process went without hiccups until the "Starting up the partitioner" -screen freezes at "Scanning disks...". The bar stops at 50%. It never progresses any farther, even after an hour. It doesn't give any errors either. After I pressed Alt+F4, the last lines were:
Code: Select allpartman: No matching physical volumes found partman: No volume groups found partman: Reading all physical volumes. This may take a while... partman-lvm: No volumegroups found
Exactly the same happens with firmware-6.0.3-amd64-netinst.iso too, or any of the live versions I tried. The result of graphical installation was also nothing. The USB pendrive created by LinuxLive USB Creator was nonoperative in exactly the same way.
The computer is brand new, without any previous OS installations. My desktop computer has the following parts:
As I mentioned before, I has having freezes while installing F12 (x86_64) with a GeForce 8600 GT. I was able to complete the installation by doing it with the "basic" video driver. However, I was still getting frequent freezes. I installed the testing Nvidia drivers, and the freezes went away. When it froze, it was a hard freeze -- it wouldn't respond to CTRL-ALT-DEL or SysRq (I did enable SysRq first). I had to do a hard reset.
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags 1 1049kB 3146kB 2097kB primary bios_grub 2 3146kB 944MB 941MB ext4 boot 3 944MB 94.4GB 93.4GB host lvm 4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot aptitude purge grub-pc aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell: set boot=(hd0,gpt2) set prefix=(hd0,gpt2)/grub insmod normal normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
I installed XandROS on my vista machine. I can access the Windows partition from Linux but in Vista I cant see the Linux partition...is there anything I can do about that?
We are having a cluster with couple of disk servers, compute nodes and a head node. Disk server is nfs mounted on all the compute and head nodes. The problem is that if any of the disk servers hangs, it freezes rest of the cluster too which is dangerous. Ideally, cluster should not care about the hanged server and run without any problem except files from that server is not visible. Is there any way I could avoid the problem of freezing cluster because of one hanged server?
