This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
On my Linux system, I want to create a symbolic link to a folder on my Windows 7 partition formatted FAT32. I use:
sudo ln -s /media/OS/Users/dennis/AppData/Roaming/.minecraft ~/.minecraft
However, I end up with a file in my home directory called .minecraft and when I try to access it, I receive:
bash: CD: .minecraft: Too many levels of symbolic links
is there a way to make the symbolic link to the FAT32 folder?
First I tried to create a new partition within windows but Ubuntu never liked it. Finally I just went to intall it on the whole hard drive and it froze during the who are you screen trying to get a time from the network time server. I read something that said restart and now I cant boot my laptop
View 6 Replies View RelatedI am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
View 1 Replies View RelatedI just started using ubuntu on my laptop... At the moment is the only operative system available on my machine.Unfortunately I need to install Windows 7 too because I need it for my job.can somebody please help me creating a partition and installing windows?will I be able to access the files stored on my pc from both the operative systems?I recently replace the hard drive and at the beginning I created a bit of mess because I first installed windows 7, than ubuntu on a partition (splitting the hard-drive about 50%) and then, as I was having problems with windows I decided to just keep ubunto, so I reinstalled it on the hole hard drive (I guess)
View 5 Replies View RelatedI am using Ubuntu 11.04 on my sisters computer which I am borrowing until my laptop gets fixed by Dell *sigh*
The only catch was that I had to remove the virus thats been plaguing this computer any means necessary my plan was to delete the windows 7 partition and put Ubuntu in its place temporarily.
My sister didn't have the Windows 7 DVD that was given to her *sigh again* but she did still have the key labeled on the side of the machine. So my plan than included to download that .iso of Windows 7, and then use setup.exe.
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
Currently, my disk layout is: 20GB(windows-ntfs) / 250GB data-ext4 / 20GB ubuntu-ext4 / 4gb swap
Since I no longer use windows, I want to move ubuntu to the first place.
What do I need to change in configuration files, grub and anywhere else?
Shoudl I keep swap where it is or move it, too?
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
View 2 Replies View RelatedI tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
I installed XandROS on my vista machine. I can access the Windows partition from Linux but in Vista I cant see the Linux partition...is there anything I can do about that?
View 3 Replies View Relatedthen have a dual boot option to pick wether to load xp or ubuntu ,I want to make sure I can install ubuntu and get it working correctly IE loaded all drivers and install a media sharing device to view on my xbox 360 and install firefox and utorrent , This is basically just a media machine to do everything on my xbox 360.
I dont want to install it from scratch in case there is a problem then I just set myself up for a bunch of work to get it running correctly again.
Currently, I have a full install of Ubuntu, but I would like to create a partition for Windows. I only have 1 MB of unallocated hard drive space, but I do have a 227.13 GB partition, only 6.48 GB of which is used. If I create a partition table, will my computer become unbootable? And if so, is it possible for me to use the Disk Utility to re-format my hard drive to NTFS so I can completely reinstall Windows instead?
View 3 Replies View RelatedSo Ubuntu needs to go so I booted onto a live CD of Ubuntu and used Gparted to delete every one of my linux partitions. I created a ntfs partition, will windows boot on this. When i tried it before it said didn't recognize file system so I deleted the linux file system and created a ntfs one. Is that all?
View 2 Replies View RelatedI am not able to create a directory on the windows partition. The error I am getting is:
mkdir: cannot create directory `test123': No space left on device.
mount command used:
sudo mount -t ntfs /dev/sda1 /media/
df -i output
/dev/sda1 15458772 315136 15143636 3% /media
[code]....
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.
I installed Redhat Enterprise 3 on one of my servers. In my haste I didn't properly partition both Hard Drives and only properly partitioned one of them. Thus now I have
/dev/sdb1 478711768 137858256 316536328 31% /
/dev/sda1 101089 15346 80524 17% /boot
Where /dev/sda1 is actually a 80 GB hard drive. Is there anyway I can safely and easily repartition the unpartitioned space without causing a huge mess? I have a very important Oracle database on /dev/sdb1 and thus I want to be able to back it up on the second disk. I can create a partition on that drive?
When using the gparted option to create a new partition table does this automatically create a new mbr?
View 1 Replies View RelatedI installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View RelatedLong story short, someone repaired my brother's computer and set a password on his account, now we can't get in and can't contact the person who set the password. Is it possible to create a Windows XP user if I have access to the windows partition, from a linux partition or pendrive, for example TinyCore?
View 4 Replies View RelatedNew Dell Inspiron 1545 Laptop with Windows 7 Home PremiumTrying to load Fedora 10 in available space. Had to go to custom layout none of the other partition selections seem to work - kept getting error messages. Custom layout would let us format the / and /boot partitions we created.
View 5 Replies View RelatedI have Suse 11.2 installed. In Dolphin file manager I can see read files in my windows partition. But I cant create or delete any of these files as a user. I opened Dolphin as root and changed the permission rights of this windows folder so that all groups and users can view and Modify content. But when I try to create something I get the message access denied, "check your permission rights". And how can I change these permission right for my user in console mode?
View 14 Replies View RelatedI would like to create Logical partition in Extended partition using fdisk in Fedora 14 I created extended but fail to create logical partition.
View 6 Replies View Related