Fedora Installation :: 11 Installer Fails When Making A Partition?
Jun 12, 2009
When using the manual partitioner on the fedora 11 installer on the live cd, both for 64 bit and 32 bit, it will not allow me to create a new partition. I understand that I have four primary partitions and it cannot have more than that, so I tried deleting one of the partitions, then creating the new ext4 partition for F11. It still fails and gives me the same bugsee attachment)
how to read this, especially since there is so much there. I see at the top it says that there are 4 primary partitions, could it possibly still be seeing 4 primary partitions when trying to create the new one, even though I am deleting one of them? Other than this, I truly have no idea what else I can do.
EDIT: Attachment wont load up for some reason, here is some of the error file:
anaconda 11.5.0.59-1.fc11 exception report
Traceback (most recent call first):
File "/usr/lib64/python2.6/site-packages/parted/disk.py", line 183, in addPartition
constraint.getPedConstraint())
[Code]....
View 5 Replies
ADVERTISEMENT
Feb 3, 2011
So I decided to reinstall my 10.10 to undo the 'encrypted home folder feature.' I know are other ways to undo the encryption, but for various reasons I'd rather just do a quick reinstall and start fresh.Currently, I dual boot linux and windows, each with their respective partitions. There is also a storage partition that is fat32 to swap files between the two OSes. So the partitions are:
[Code]...
View 5 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Jan 31, 2010
I'm facing a problem installing Fedora 12 x64 on my desktop.I've been trying to get the Graphical Installer (anaconda) to run, in vain. The error message I get is reproduced below:
Code:
(EE) [drm] drmOpen failed
(EE) NOUVEAU(0): [drm] error opening the drm
[code]....
View 1 Replies
View Related
Aug 21, 2009
This is my first time using Fedora. My previous experience is from Ubuntu. However I want to give a try for Fedora so I went ahead to install it on my new computer. Problem is that Fedora Installer (Live CD) wiped out my NTFS Partition. Causing my computer unable to recover Vista from factory DVD because it lost system partition as well. I want to know if this is my error or a bug in installer.
Original partition setup:
220 GB - Vista System Partition (NTFS)
14 GB - Recovery Partition (NTFS)
First I resized system partition under Windows Management in Vista:
170 GB - System
50 GB - Unallocated
14 GB - Recovery
Using GParted from Ubuntu 9.04 Live CD, moved recovery to the left:
170 GB - System
14 GB - Recovery
50 GB - Unallocated
Rebooted into Vista, make sure everything is fine. Then put in FC 11 Live CD, using custom layout setup in partition, intended partition layout is:
170 GB - System (NTFS) - Primary sda1
14 GB - Recovery (NTFS) - Primary sda2
200 MB - /boot (ext3) - Primary sda3
sda4 - Extended Partition
45.8 GB - / (ext4) - sda5
4 GB - swap - sda6
After I check my setup and pressed enter, it returned with unable to format /boot error: -1. Restart FC installer, it tells me that my hard drive needs to be re-initialized. I clicked no and reboot. BIOS tells me that no OS is found. Attempting to recover from factory DVD failed, telling me that system partition is gone. I want to know did I do something wrong or is this a bug in FC installer.
View 6 Replies
View Related
Jul 28, 2011
Trying into install fedora. I am setting up my system as a dual boot over two drives. I have set up a custom layout and whenever I get to the step to write changes to disc it crashes with an unhandled exception. I have tried multiple times now, it always crashes.
Here is the first line from the exception report:
anaconda 15:31 exception report
Traceback (most recent call first):
File "/usr/lib/python2.7/site-packagees/pyanaconda/storage/devicelibs/swap.py", raise SwapError("swapon failed for '%s'" % device)
View 10 Replies
View Related
Apr 13, 2009
I am doing a fresh install of Fedora 10 64bit on my PC. What I have done is, freshly installed Vista Home Premium 64 bit on the entire Hard Drive (680GB), then fired up the live CD and told the installer to resize sda1 (The windows partition) to about a 60:40 ratio. I intend to dual boot the system
Now the thing is, it's been running for half an hour now and there's no progress indicator on the installer so I don't know if its actually doing anything. Well there is a progress indicator but it's nonsensical, it just moves backward and forwards. The HDD indicator LED on my computer is flashing every now and again, but not constantly as I expect it to?
View 5 Replies
View Related
Oct 2, 2009
when i try to install fedora 11 on my laptop my Fedora 11 Preview installer crashes after attempt to create a partition. How do i overcome this problem
View 6 Replies
View Related
Nov 28, 2009
I have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
View 3 Replies
View Related
Feb 7, 2010
Whenever I try to install Ubuntu 9.10 x64 from a Live CD the installer freezes or quits when trying to partition the drive. I tried booting into the Live environment and using GParted but that would only let me make a ReiserFS partition without crashing. With the Reiser partition I tried the installation program again but this time the installer froze when trying to install the files.
My system specs are:
AMD Athlon 64 X2 6000+ (3.0GHz)
4GB RAM
500GB SATA2 HDD
ATI Radeon HD 4770
Currently it also has a second SATA2 HDD with Windows 7 installed but I disconnect this during installations
View 4 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
Feb 7, 2010
The Install program is failing to see the hard disk!
Now heres the really weird bit. The live cd can see the drive just fine.
I have created partitions using gparted and the disktool also sees the drive just fine but as soon as I go back to the installer it shows no hard disk!
It's a SATA drive which I suspect might be a part of the problem.
Is there a way I can install without the install program?
Is there a way to make the install program see the drive?
This is ubuntu 9.10 desktop.
View 2 Replies
View Related
Sep 2, 2010
I am trying to install Ubuntu as a secondary operating system on my Windows 7 PC.
System specs as follows:
AMD Athlon II X4 620 Processor 2.6 Ghz
4.00 GB RAM
ATI Radeon 4600 series video card
I downloaded the 32-bit ISO image from ubuntu.com and burned it to a CD. When I try to boot, I get a purple splash screen with a couple of icons on the bottom. Shortly thereafter, I get another screen that says Ubuntu and has 5 dots on it that change color from red to white in sequence. During this time, my CD drive is active. After a very long time, the drive goes quiet and I get an error that the installer can't find the username or password. I don't remember the exact text of the error message. The system was hung and required a hard boot to recover.
Reading these forums, I rebooted the computer and this time pressed the escape key once the display had changed to the Ubuntu with the dots. The username/password error came up quickly and was followed by several "Bus error" messages. I ejected the CD and restarted the computer in order to come here for enlightenment. I'm reasonably good with Windows but a total neophyte when it comes to Linux. I'm going to try it again and this time record the exact error message (which is what I should've done initially).
[Code]....
View 8 Replies
View Related
Jun 1, 2011
I think I need some command line help here. I am trying to download the initial updates using Yum Extender GUI in LDXE desktop. It downloads the updates until about 90% then If I get any error it craps out. I have gotten errors relating to no key avaliable, sorry don't remember the precise text, and also that no repo is avalable for a specific pacakge. At this point there are no options given to skip, etc... just "OK" and Yum Extender closes and I have to start over. It seems to start over about were it left of, this leads me to believe the packges are being stored some where on the drive.
Without using the GUI, hey I'm trying to switch from Windoz, Is there a command line that will tell Yum to download all updates and install and skip errors? I imagine there must be if this package installer is working, it must be talking to the system in a similar manor.
View 5 Replies
View Related
Nov 25, 2015
This laptop has been in the mainstream news as the cheapest Windows laptop available. Unfortunately it has a 64-bit CPU with 32-bit UEFI that dumps to the grub shell before installation. In addition, the built-in keyboard does not work.
As far as the dump to shell problem, this seems like something is not setup correctly in the grub UEFI configuration. This "hybrid" notebook should be using the multi-arch as I understand the situation. I noticed there is no grub configuration file in the multi-arch netinst ISO when I mounted it and looked around. I also noticed the standard netinst ISO is not easily mountable: there are errors when I try to mount the individual partitions to inspect the grub configuration. Additionally, Kubuntu boots perfectly aside from the keyboard issue. Devuan also boots when I modify the netinst to bypass gummiboot and use grub directly. Finally, the multi-arch grub shell freezes up when autocompleting and searching through the drives for the grub config, leading to a forced reboot. As an extra note, I tried 2 different flash drives and CD install media with the same results.
I tried many, many grub kernel combinations to fix the keyboard issue. It works in grub, but not in Linux. I was ultimately going to try a newer kernel to fix it.I was in a hurry to get something set up so back to the store it goes.
View 1 Replies
View Related
Mar 10, 2016
I am trying to clean install Jessie 8.3.0 onto an old PC, where I already have wheezy 7.7 working. I am using the 3 DVD- i386, which passed the integrity check.
Installation goes on smoothly till completing the "Select and Install SW" stage from 1st and 2nd DVD. At this point I get the warning that "Installation step failed, ..", giving the choice to repeat.
When repeated, the process gets completed (without asking for 2nd DVD), the new installation boots normally, but the KDE desktop opens irregularly, with some basic applications missing, and some flaws during certain operations.
The APT does not show any missing/broken link. I tried and repeat the installation with different choices as for kernels and/or desktops, but got the same result. I cannot guess where the problem originates, nor whether it is a known bug of the installer.
View 6 Replies
View Related
Feb 23, 2010
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
View 4 Replies
View Related
Oct 14, 2014
I am currently trying to install Debian Wheezy 7.6 x86_64 on an Intel Server System R2224GZ4GC4, but the Installer doesn’t recognise any of the devices attached to the onboard SATA controller.
Debian Version
Debian Wheezy 7.6 x86_64
Hardware used
Server: Intel Server System R2224GZ4GC4
Motherboard: Intel S2600GZ4
Onboard SATA Controller: Intel Patsburg 4-Port SATA Storage Control Unit (rev 06)
Device on Port 0: Samsung 840 Pro Series SSD
Device on Port 1: Samsung 840 Pro Series SSD
Device on Port 2: Samsung 840 Pro Series SSD
Device on Port 3: Intel 510 Series SSD
While the onboard SATA controller does support so-called “fake RAID,” this ‘feature’ has been disabled (i.e., the BIOS setting “SAS/SATA Capable Controller” is set to “INTEL(R) RSTe”). This is confirmed by the controller during the boot-up URL...Weirdly enough, the Intel 510 Series SSD contains an old system (Debian Squeeze 6.0, Kernel 2.6.35-5-amd64), which can boot and which does recognise all SSDs.
Remedies tried
* I’ve compiled the list of SCSI, SAS and block device related modules that the Squeeze-System, which recognises the SSDs, used and manually loaded these modules during the install process.* I’ve tried to rescan the SCSI bus by:
Code: Select allfor host in /sys/class/scsi_host/*; do echo "- - -" > $host/scan; done* I’ve tried to remove all disks, save for the Intel 510 Serives SSD.* I’ve tried all of the above combined.
View 2 Replies
View Related
Apr 20, 2011
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
View 3 Replies
View Related
Jul 11, 2010
i cant install 10.04 on my desktop with the 32bit or 64bit versions of 10.04 desktop.
i get to step 4 and there is nothing listed for partitions or any information and if i click forward, i get that message "no root file system is defined" "please correct this from the partition menu"
View 1 Replies
View Related
Jul 23, 2009
When I installed Fedora I wasn't paying attention and used my whole hard drive for Linux. Now my Vista is gone, and I don't have an NTFS Partition to reinstall it. Obviously this one is not formatted right... But I want to know how I can add a new NTFS partition to be able to reinstall Vista. I don't care if I have to delete Fedora... I'll just reinstall later using more attention.
View 8 Replies
View Related
Nov 28, 2010
I wanted to migrate from ubuntu karmic to the latest ubuntu 10.10, but i already have a lots of data on my hard disk in home directory. i was thinking if it is possible to transfer all the data to one directory and make a separate partition of it , so tht when i install a fresh copy of ubuntu 10.10 on my system i need not format this new partition ,which contains al my data.is it possible tht this new partition will automatically get mounted on the new system without the need to execute commands from terminal every time i start my system. if there is any other alternative way for solving this problem i would follow tht too.the reason for my migration is that karmic is really troubling me a lot and so many applications including my sound device have failed to work and i am not able to rectify them..
View 1 Replies
View Related
Dec 20, 2010
This is maybe the 15th time I've installed an Ubuntu OS in the past two years, and it's the first time I've really been stuck.Not long ago I installed 10.10, with no problems, but a couple days ago I did a fresh install of windows 7, and I planned to re-install ubuntu 10.10 alongside it.Before I installed windows, I created a partition on my 320gb HD, half and half, but while doing this I noticed that gparted would crash if a USB key was plugged in. I mention this because I'm convinced this is related to the problem.
After having installed windows, I went and created a bootable usb key with 10.10 using unetbootin (which I've used once before, but along time ago). I'm unable to make an actual live CD because my disk drive has been broken for the past year - a fact that has never stopped me from installing different distros with a usb key.So the installer starts as usual, but after the 2nd (or 3rd) step (where it says "for best results, make sure that your computer is plugged in, that you have an internet connection, and at least [...] of free space), I click forward, and the little wheel just spins forever,it never advances.I tried everything again with 10.04.1 and I got the same thing, this time after choosing my keyboard layout.
When I simply go to the live distro and then go to install, I see that at that moment, there's a crash report, something about gparted, which I'm assuming is a built-in part of the next step.
To sum up
-gparted doesn't seem to like USB keys
-installer won't advance to partition table
-can't use a disk because drive is broken!
My computer is an Acer Aspire 4530, AMD64. The 10.10 and the 10.04.1 installations were both 64bit.
View 8 Replies
View Related
Mar 21, 2015
Tried to install Jessie RC1,but installer hangs on formatting the partition,at 33%.
View 7 Replies
View Related
May 19, 2015
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
View 7 Replies
View Related
Jan 12, 2016
I have an issue with Gparted v0.19.0 (Jessie) which has replaced v0.12.1 (Wheezy) which works fine. I had hoped to ask this question in Gparted's own forum, but after three weeks and multiple attempts no-one has approved my account there.
Unfortunately, my existing partition structure (on two different laptops) seems to be invisible to the new version of Gparted. Since parted seems to be used by the Debian installer, the Jessie installer cannot install on these machines without repartitioning the entire disk. That means that on such machines, the only option is to wipe everything or install Wheezy, then edit sources.list to upgrade to Jessie.
Both Gparted v0.19.0 and the Jessie installer report the entire hard disk as a single Fat16 partition,The same partitions which are invisible to Gparted appear as normal in the Places sidebar, of either Thunar or the PCManFM file manager. They can be mounted and used, seemingly without issue (I have experienced the same problem under Ubuntu/Lubuntu 15.10). Below, is the shell output of fdisk, which can see the partition structure and parted, which cannot:
Code: Select all$ sudo fdisk -lu
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[code]...
View 6 Replies
View Related
Oct 12, 2010
I have win 7 installed on a primary partition along with two other primary partitions containing a recovery partition and system files partitions. (don't know exactly what the latter is for.) I made a defrag and resized the win partition to make some free space for a primary ubuntu partition.I then inserted the 10.10 live disc and created a fat32 shared partition, a root (/), a /home Nd a swap in the advanced gparted menu, BUT every time I try to initiate the installation I get an error message saying that installer couldn't create the fat32.
View 4 Replies
View Related
Apr 24, 2011
I'm trying to install Ubuntu 10.10 on a brand new 500GB hard drive I just purchased and installed in my machine. I boot from the CD and instruct Ubuntu to install to this drive and tell it to "erase and use the entire disk" for this 500GB drive. After moving forward from that, I see it saying a message about creating an ext4 partition for root "/" and then shortly after the entire install dialogue goes away. All I am left with is the little circle cursors spinning round (mouse input still works) and the installation background. The HDD activity light was still on though. I gave it about 3 hours before I finally gave up and tried again.
When I tried again, I saw that it did create two partitions (root and swap) during the last attempt. The same thing happened, although now even mouse input isn't responding so my system is completely locked up. HDD activity remains active this time as well. Running Ubuntu from the CD works fine. The only problem I saw with it was when I ran gparted from the CD and tried to manually create a ext3 partition on my new disk drive. When I tried that, I ran into a similar occurrence (couldn't run any programs, eventually system locked up) and had to reboot.
I have a second hard disk but I have a lot of valuable data on that and don't want to mess around with it. It could be a hardware failure, but that seems unlikely to me as this is a brand new Seagate disk drive. I suppose I could try installing it on a spare partition on my other drive and see what happens, but other than that I'm out of ideas.
View 3 Replies
View Related
Jul 26, 2010
I have compiled a custom kernel into the debian distro that I was working with and I've installed/written some software which is currently running on the machine.
I want to make an ISO installer which will install debian with the recompiled kernel as well as the custom software in its default configuration state.
View 1 Replies
View Related
Oct 14, 2010
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
View 7 Replies
View Related
