I have just installed Windows 7 to my laptop; here are the specifications code...
And then, it just holds there. I've also tried 'root (hd0,0)'
On the plus side, Ubuntu 9.04 is unaffected once I had Knoppix 6.02 LiveCD correct the boot manager, so it can boot Ubuntu.
I have an Acer Aspire 5810T which came with Windows Vista. I prefer Ubuntu but I need some windows applications so I dual-booted Vista and 9.10.
There was a few minor problems with the Vista side but I didn't use it enough to care. A few weeks ago Vista would not open some programs and others would shut down automaticly and some would open but not connect to the internet like they should. This happened on my previous laptop and when I used the system recovery discs to restore the computer all those issues were gone.
I used the recover discs to restore everything to its original factory settings, it said everything was successful so I restarted. My computer got to the grub menu but when I chose Windows Vista as my operating system it goes black for half a second then returns to the grub menu.
I can get into Ubuntu fine, and I can see the Vista files when I mount the drive to Ubuntu. When I look at the files everything is the way it should be if I had restored it but I can't boot it..
I beseech you, esteemed fellow denizens of the linux forums, to help me with the following minor tangle.
I enter this from the enchanting Ubuntu 11.04, which I installed some time ago. It loads up happily from the top of my grub 1.99 menu.
The grub menu had the following entries:
Linux ...
Linux-Recovery ...
memtest86 ...
Windows XP ...
Windows XP Recovery ...
Windows XP Recovery ...
All of these menu options loaded their kernels correctly from the grub menu.
Well, all but one. My former operating system, Windows XP, would not load with its familiar majestic turpitude.
No. In fact, when I finally needed XP, I selected its menu option in grub 2, and the menu disappeared.
In its place, a single, blinking caret appeared. Just blinking, and blinking. Taunting me. Threatening me with the prospect that it might take away my pirated starcraft games forever. Windows had run perfectly before.
I have a Dell Inspiron 1721. Recently I replaced Windows Vista Home Edition (32 bit) with Slackware Linux 13.
Lilo wouldn't work, when I turned on the computer it printed "Li" and then 20 lines of 090909... and then the computer would hang up. So I just used my Slackware-boot-flashdrive-thing that I created during installation to boot my computer and told myself that I would fix it later.
Also, when I installed, cfdisk (or it might have been sfdisk) complained that /dev/sda did not contain a valid MS-DOS partition table. fdisk still worked, so I used it to create a new table, and cfdisk worked fine and the installation went along normally.
I reinstalled Slackware about two days later (I realized that I had installed the 32 bit version instead of the 64 bit). Lilo still didn't work.
I thought it might be something wrong with the Slackware DVD, so I downloaded and attempted to install about 4 different distributions. None of the CDs would work. The computer would start up, Linux would start to load, and the computer would freeze.
Xubuntu was the only distro I had that I could get to install. Halfway through the installation, (Surprise!) I got an error, something like "Package Grub failed to install, you will not be able to boot your new operating system".
The rest of the install went fine, so I restarted my computer and tried to use another one of my CDs to boot Xubuntu. I got the error "/dev/sda does not contain a valid partition table", and later "ext4-fs: checksum failed on dev sda at sector...", and "please specify a valid partition for root=". I am absolutely positive that I entered the correct partition, I triple checked and entered other partition names to make sure.
I'd also like to add that the computer makes horrible crunching noises when it starts up and when I do stuff like press keys. So is something seriously wrong with my hardware, or is there another explanation for all of this? Because I really don't want to have to try to repair the computer and can't pay to have it repaired.
Cant boot windows or ubuntu
Well i have two hard drives, i used wubi on windows (which is on my c: drive) to put ubuntu 10.10 on my d: drive. Everything was running smoothly until the update manager uptated ubuntu. When the installation was completed, i was told to restart. So i did. When it restarted, nothing happened. My computer froze and i cant access windows or ubuntu, and i cant change anything.
I am a linux newbie.
I had dual boot fedora 9 with windows XP before. Now I decided to change to fedora 11. I choose the option Replace existing linux while installing the fedora 11. My windows used to be in C drive while my linus in D drive. So I thought it would replace the D drive and remain dual boot.
However, after I reboot the computer, I realize that it can only boot linux. My windows partition appear as a File System in linux. code...
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order:
sda1: Windows 7 (can't boot into)
sda8: ubuntu (gets erased)
sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies View RelatedHW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
i installed ubuntu 9.10 for the third time on my lenovo s10e running windows xp. my first two installs went good until ubuntu tried to update gnome to the latest version and my computer went to sh grub on reboot, so on my third install of ubuntu 9.10 using wubi i turned off updates and the computer was working wonderfully for weeks until i let my netbook battery die.then the dreaded sh grub on reboot. i really like ubuntu and prefer to use it over xp.
View 2 Replies View RelatedI'm wondering about the best way to manage a dual install of Ubuntu and Windows XP.
I had Ubuntu installed on my HDD, but I wanted Windows also, so I used a live CD to partition the drive, and opened some space for a Windows partition. I installed Windows in that space. Naturally, the install set up the computer to boot directly into Windows. I want to set up GRUB to load and allow me to choose my OS on boot.
I'd like to use Super GRUB Disk to install GRUB on the MBR of the disk to allow me to choose at boot.
I HP pavillion dv2715nr with Windows 7 Professional 32 bit and Ubuntu 10.10 64-bit. I first install Windows 7 then installed Ubuntu 10.10 64 bit (grub2). And upgraded to Kubuntu. I can log on Ubuntu.
Problem: If I select Windows 7 from grub menu screen goes black and nothing happens.
Grub is gone but still there can only boot to Windows?
View 1 Replies View RelatedSo after completely giving up on linux for a year... after problems with installing grub, i reluctantly decided to give it another shot.
So I installed a new copy of kubuntu, everything worked correctly except one problem arised with my windows partition. When i try to boot windows through grub, it simply directs me back to the grub boot menu. I can boot kunbuntu fine.
I have tried recovering startup issues by using a windows 7 disc and also run bootrec.exe.
I had no problems running the command /FixMbr however /FixBoot has issues....
My partitions are as follows:
I think the problem is that grub has overwritten windows boot files so everytime i try boot windows it reverts me to grub in a sort of loop.
I installed Kubuntu 10.04-2 on a small hard drive, its in my computer along with my large hard drive which is devoted to Win XP. The Kubuntu worked fine for a while, then somehow the GRUB got transferred onto my Windows hard drive. I'd like to get the GRUB off my Windows hard drive and have that boot via its usual Windows method. I reformatted my small / Kubuntu hard drive, that did not help. In fact this made things worse, now there is no Kubuntu in my computer, so now I can't get into either Windows or Kubuntu. How can I get rid of the GRUB AND have Windows boot up normally?
View 7 Replies View Relatedi've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
View 2 Replies View RelatedI had been dual-booting Ubuntu and Windows 7. Today I upgraded to Ubuntu 10.04 and now Grub still has a Windows 7 boot option, but when selected it goes to a blank screen and does not boot Windows 7 as it would before.
View 4 Replies View RelatedI upgraded to Ubuntu 10.04 recently and now have MBR problem. When selecting Windows XP from the GRUB menu the screen defaults to terminal mode with grub rescue> displayed. I admit I know little to nothing about Ubuntu, unix, etc other than I like what I have seen so far and am trying to learn more. I need to (unfortunately) use Windows and have data on it that I can't afford to lose. How can I repair the problem so I can boot Windows from the menu? Thank you
P.S. I was dual booting successfully earlier. I had the previous version of Ubuntu running with Win XP and everything was fine. The problem started when I upgraded to Ubuntu 10.04. I have tried reinstalling 10.04 with no success. If I am unable to get dual boot working my wish would be to save my Win data and then I can wipe clean and reinstall Win and Linux.
Yesterday I made a thread about going back to Windows as I'm giving this laptop to a friend. Anyway, after I finally got Windows to re-install I'm now stuck with "grub rescue" instead of the OS booting. Is there anyone who knows a way I can get rid of grub rescue and get Windows to boot?
View 4 Replies View Related