I am thinking of buying an Asrock Ion 3D 152D D525, 2GB, 320GB, can anyone let me know if it is possible to install Ubuntu 11.04 on this machine or will I have problems with drivers etc.
View 2 RepliesTrying to put up my HTPC with Ubuntu 9.10 but I cant get any sound to work. Im using a HDMI cable between the pc and TV. Computer is an Asrock ION HT/BD 330. Also running a 64 bit version of Ubuntu. I have upgraded all I know or think I know what to do but still with no luck. To start of heres my multimedia.
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:fae78000-fae7bfff
my cat /proc/asound/version is as follow
Advanced Linux Sound Architecture Driver Version 1.0.22.
Compiled on Dec 17 2009 for kernel 2.6.31-16-generic (SMP).
My lsmod is as follow:
Module Size Used by
vfat 13184 0
fat 59832 1 vfat
binfmt_misc 10220 1
ppdev 8232 0
snd_hda_codec_nvhdmi 6304 1
snd_hda_codec_realtek 288292 1
snd_hda_intel 30208 0
snd_hda_codec 96384
My modinfo soundcore is as follow
filename: /lib/modules/2.6.31-16-generic/kernel/sound/soundcore.ko
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
srcversion: 3A50BBE947364A4D9DB6A97
depends:
vermagic: 2.6.31-16-generic SMP mod_unload modversions
I'm setting up another xbmc machine. This one is a asrock 330 machine. My other machine is running ubuntu 8.10. I have a script that I use on my other machine, so that when I hit a button on my remote it will kill xbmc if its running and start xbmc if it is not. This script works without any problems on my other pc. When i try and run in from the ssh terminal on the asrock I receive the following log statements.
I should add, i installed ubuntu 9.10 on the asrock. I then installed xbmc using the ppa repositories. So i guess this is the full blown gdm installation with xbmc on top of that. The final goal is to then configure irexec to use this script to start and stop this application on the main gdm desktop.
I'm a beginner to linux configuration and just get by from reading peoples tutorials on how to setup their machines.
Code:
xbmc@xbmc-desktop:~/scripts$ ./startStop.sh
xbmc@xbmc-desktop:~/scripts$ No protocol specified
/usr/lib/pymodules/python2.6/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
warnings.warn(str(e), _gtk.Warning)
[Code]....
i cant get ubuntu to install on this board live usb ,desktop, alternate or cd alternate nothing i can get to the screen where you choose options i can pick the things i want and hit enter then get a non blinking cursor the board is pretty new so i can t seem to find anything about it Google gives me a few people running Linux on it if i use the alternate i get to the detecting hardware section and it locks up.
i installed the wubi but that wont work either there is a short 5 second splash screen the te1lls you to push esc for options ive tried all the options and it wont boot either i have even tried the newest fedora it locks up just about the same place. i wonder if its a bios setting or some acpi stuff but i dont know this board even offers usb3 and sata 3 so is linux just lagging behind a bit? i tried emailing asrock and got a bad English response saying they offer no linux support
Quote:
ASRock support Windows OS does not support any Linux version. what to do what to do ? i am currently running xp64bit it runs boots and loaded fine with no tweaking but i cant use winblows
specs as it sits:
asrock 890fx deluxe 4
amd 6 core proc
ati video
ocz ddr3 ram
wd sata 320 hdd
ide dvd burner and dvd rom
Ever since newer karmic kernels 2.6.31-21 and 2.6.31-22 the Asrock ion built in IR wont work with the drivers Asrock provides even though they have since then provided drivers for 10.04, which still doesnt fix the issues with the remote (just doesnt work)
THE PROBLEM
The solution is of course to downgrade kernel to 2.6.31-20 #58 which remote works fine and newer script version introduces a fix to this. However looking at the available packages seems that most of the kernel 2.6.31-20 is no longer available to re-install.
e.g. linux-headers linux-image-wireless-backports etc etc were able to get a fairly working 2.6.31-20 but most of that kernel version ike I said s no longer available.
So question is. Can anyone shed light where to find the missing 2.6.31-20 #58 stuff so we have access to a full downgrade? Any information taht could help get a full downgrade to 2.6.31-20 #58.
I've a problem with my AsRock Core and my audio over HDMI. Trying to get it work now for over 2 months.On Ubuntu 10.04 it was working with the offical Realtek HDA Intel driver for Linux but on Ubuntu 10.10 the driver installation failed.
Code:
Linux myMachine 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux
aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
[Code]...
I have recently purchased an asrock ion 330. I have done a fresh install of fedora 10. All initially appears fine. When I modify etc/inittab to run level 5 I start getting problems. When fedora boots tty1 never gets to the login prompt. It stops with 'fuse init (api version 7.9). I don't get the desired graphical login. If I reset to run level 3 it boots fine To the text console and I can login and startx with no problems.
View 14 Replies View RelatedI installed a secondary Nvidia GeForce7300GS 256 PCIe video card in an ASROCK ION 330 motherboard. The idea is to provide an S-video output. The interesting bit is that lspci shows only one of the two cards. If I set the ION video adaptor primary in BIOS, then lspci will detect only ION, if I set the PCIe video card then lspci will detect the GeForce 7300GS. I'd like to write my own xorg.conf, but how can I refer to drivers without the pci bus address?
View 2 Replies View Relatedi just bought a ASROCK core 100ht and installed ubuntu 10.04.
My speakers and headphone works fine but my microphone is not working, a common problem. Usually i solve it through alsamixer. However my Alsamixer shows only " Master PCM S/PDIF Capture " (see pic)! And no microphone option. Does anyone knows what is going on?
these are few of my outputs :
francesco@checco:~$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfbcf0000 irq 22
francesco@checco:~$ amixer
Simple mixer control 'Master',0
[Code]....
I can not get my sound to work I have a openSUSE 11.3 on an Asrock. it is a driwer for 5.1 CH HD Audio (via vt1705 audio codec) is missing or not functioning.
View 9 Replies View Relatedif have a problem with a K8A78LM Mainboard from AsRock. If I try to print something, the mashine freez. A echo "Hello World" > /dev/lp0 send only 2 or 3 chars to the Printer.
View 1 Replies View RelatedI got myself a brand new pc, it has an asrock z68 pro3 motherboard and an i2500k proc. the screen is a dell u2311h the problem is i cannot get the resolution higher then 1280*1024. with 10.10 the monitor works perfectly, but the system crashes. so i want to use 10.04, which seems quite stable on my hardware.
View 2 Replies View RelatedI tried to listen mp3 on in, but it was too silent (of course, I tried to put speakers to be louder).. I switched to winXP (as a second OS) on this computer, and sound volume is ok, so I suppose it's problem in OpenSuse... I have ASROCK N68C-S UCC motherboard with nForce 630a sound chip on it.
View 2 Replies View RelatedThe ethernet adapter on my Asrock H97M ITx/AC motherboard isn't recognized during install. It's a Qualcomm Atheros AR8171 and none of the available options like alx or e1000e are working.
I originally tried to install openmediavault [URL] .... - which is based on debian - from an USB Stick and only came up tothe point where it tries to recognize the network card. It couldn't and promted me to choose one manually. So I checked the specs of my motherboard (a shiny new Asrock H97M ITx/AC with a Qualcomm Atheros AR8171) and after a short search I narrowed it down to alx or e1000e. Both of which only triggered a short flash of the interface and nothing more. I guess that's linux' way of sticking its tongue out at me.
For the last 2 days I therefore searched high and low and came across many possible solutions that either didn't work or included too much linux lingo that I couldn't understand it.
One solutions was to install a vanilla debian and then somehow install OMV over it, but debian itself couldn't recognize the network card either. So now I have a pretty minimal debian (CD1 install only) running but how to make it recognize and use the onboard network device.
Just out of curiosity, I plugged in an old hard drive with Win7 that hasn't been updated for at least 10 months. It only had a driver for AR8131 and warned me of using that, but it worked totally fine. Debian however doesn't even try to use an old driver but just flashes its interface at me.
Is there a way to make it work or is this board just not supported by debian and I have to resort to some other distro or a windows installation?
My sound keeps going on and off, with some variation but generally about twice a second. I can watch the speaker icon in the system tray with a red x appearing and going away. When I play anything the sound is very broken. I'm running on an ASRock M3A770DE uploaded my ALSA information: [URL]. I've tried a number of things to attempt to correct the problem, but nothing I've tried makes any difference.
This MB does have two separate sound devices, I think. This shows up in YAST/Hardware/Sound with one entry as "ATI Technologies Inc." and the other as "SBx00 Azalia (Intel HDA)". I've tried disabling each one separately, but that doesn't seem to make any difference. The description of the board says it has "7.1 CH Windows Vista, Premium Level HD Audio (VIA VT1708S Audio Codec)". I don't run Windows except in VMs, so I don't know what happens with this in Windows.
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedIf I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View RelatedIn /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
I have an apparently stable installation of Xubuntu that I've hand-tweaked in a few ways. I'd like to be able to reinstall this system verbatim on this machine should a disk crash happen, etc.Is there a "standard" method to create an install and/or total-backup CD that would be an instantiation of the currently-installed-and-modified system?
View 1 Replies View RelatedI am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies View RelatedTrying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies View RelatedI downloaded Ubuntu and burned it to a CD-There was no problem with that part. It starts to install asks about the partition then the keyboard. Then it just stops and does nothing.
View 3 Replies View RelatedI'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies View RelatedInstalling Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies View RelatedI am on 10.10 using Gnome 2. When I go to install GIMP via Terminal, SPM or USC I get an error about not being able to install libpoppler-glib4. Odd thing is I have the updated version.
View 6 Replies View RelatedI am a rookie. Yesterday, I intended to install a dictionary with the command sudo apt-get install dict-xdict, but it turned out to fail with the error. Then, I quited with Ctrl+ c, and I did not care much till today because when I want install something else today, the error keeps coming out. Therefore, I think I would better remove dict-xdict first, so I use sudo apt-get remove dict-xdict, but the error still appears:
[Code]...
I have already tries sudo apt-get -f install dict-xdict and it doesn't work out. I am hoping to install some other applications now, but I have not idea what I could do to fix this problem or just circumvent it
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
I'm trying to migrate from Ubuntu to OpenSUSE but for some reason I can't get the install to work. I've tried installing the GNOME live CD both from a CD and a USB but after I select installation it goes to the loading screen for a few seconds and then the screen goes black and it stays like that till I reboot. Is it a problem with my hardware or something or did something miss-write when I burned the CD/USB?
View 3 Replies View Related