Ubuntu :: How To Start In Console Mode

May 1, 2010

I removed gdm and kdm and my laptop started in console mode.Now I would like to get same thing - I made upgrade to ubuntu 10.4 and it starts again in graphics mode. I removed from grub menu.lst splash and quit, removed gdm and kdm - and again I receive graphics prompt.PS I removed also failsafe-x.

View 6 Replies


ADVERTISEMENT

Ubuntu Installation :: NVidia 8600GT - Start In (Tty1) Login Console Mode

Dec 17, 2010

I tried most methods suggested on many sites to install drivers
## through the additional driver panel only
## through the Nvidia.run file I downloaded
## through the terminal using apt-get

All failed to start ubuntu gui it takes me to the console login and I noticed it says "saned disabled" edit /etc/..something. This problem made me install ubuntu again three times and every time I activate the driver then install the driver Nvidia.run or through apt-get and both leads to a black screen tty1 login. So what to do now I installed and removed many things and I won't reinstall ubuntu again. Also I typed compiz and this came on:

root@ubuntu:/home/sherbieny# compiz
Xlib: extension "GLX" missing on display ":1.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :1.0
Launching fallback window manager. I want to install properly so that I can start normally and enable the extra visual effects and the custom effects. Please elaborate the steps clearly

New Info:
When I enter nvidia-settings : server X opens and says
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart the X server. When I enter nvidia-xconfig as root and restart nothing happens and when I enter:
nvidia-detector it says none
and when I enter: nvidia-smi

Error: API mismatch: the NVIDIA kernel module has version 260.19.21, but this NVIDIA driver component has version 260.19.29. Please make sure that the kernel module and all NVIDIA driver components have the same version.
Failed to allocate an RM client
Could not allocate resources!
root@ubuntu:/home/sherbieny# apt-get update kernel
E: The update command takes no arguments

A new and very exciting error everyone now also the windows 7 that I have besides linux has also crashed and cannot open the login window. I don't know whats happening all I know is that few hours ago I logged in to windows normally now I cannot login to either one of them and the funny part is: I'm working on my thesis on this computer and I cannot work anymore and I'm supposed to meet with the professor on monday.

View 1 Replies View Related

Software :: Start A Program From Tty1 Console To Be Executed In Tty2 Console?

Sep 8, 2010

How can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.

View 6 Replies View Related

Ubuntu :: Cannot Enter Console Mode?

Aug 14, 2010

My problem is that I am trying to install an Nvidia driver on ubuntu 10.04, and I can not access my console mode by pressing ctrl alt f2. When I press that keystroke my cursor will disappear till I press alt f7.

View 2 Replies View Related

Ubuntu :: Opening Images In Console Mode

Aug 22, 2010

I can gnome-open or eog a .jpg file in terminal command window in the gui mode. But when I use console, this commands doesn't open them up but instead gives an error. I want to try opening images, text files, videos, music in console mode, but the commands eog and gnome-open don't work here.

View 1 Replies View Related

Ubuntu :: Unable To Switch From GUI To Console Mode?

Mar 31, 2011

I'm having difficulty switching from GUI to console mode. I use ctrl-alt-f1 and the screen goes blank and I see a flashing cursor but I'm unable to do anything. I can switch back into GUI mode using ctrl-alt-f7. Also at times I see the word Ubuntu with 4 dots and 2 of them are orange if that's of any use. Like the initial boot loading screen.

I've tried going back to the default display drivers and that hasn't solved it. I'm using a CRT that's connected up to my display card via a VGA > DVI converter. *I've just checked and I can't get into recovery mode either

View 1 Replies View Related

Ubuntu :: 11.04 Freezes On Switching To Console Mode

Apr 30, 2011

I recently upgraded from 10.10 to 11.04 and have been unable to switch to console mode (Ctrl+Alt+Fx key combo). The system just freezes on attempt (not even capslock on off works) and the only option is hard reset. I am on a SONY VAIO VGN-CR353, just in case.

View 4 Replies View Related

Ubuntu :: Missing Login Prompt In Console Mode?

Feb 1, 2010

After upgrading to Ubuntu 9.10 I no longer get a login prompt when switching to console mode e.g. (CTRL+ALT)-F1. Instead i just get blinking cursor in the top left corner. Key strokes are printed the screen but otherwise nothing happens. I can switch back and forth between X and the console normally.

Where are the consoles configured, and is there a corresponding log somewhere i can check? Has anyone had similars problem?

My system is an old Amilo Pro laptop with a VIA 800 compatible chip-set.

View 1 Replies View Related

Ubuntu :: Won't Boot With Bash - Turn Into Console Mode

Oct 21, 2010

I've got a problem with bash, when I run my terminal or I turn into console mode, I get:

Code:

And I have to type "bash" and after I got:

Code:

How to make that bash alway running?

View 2 Replies View Related

Ubuntu Installation :: No GUI Interface / Keeps Starting In Console Mode

Jan 1, 2011

I recently installed ubuntu 10.10 on my Acer Aspire laptop 5745G-7671 laptop. It has an Nvidia Geforce gt 420m dedicated card, and an Intel HD integrated GPU. The problem is, I recenly installed a driver for it (because ubuntu had already found a driver in hardware management). After I did that, everytime I try to start ubuntu, I can no longer see any GUI interface.I have tried everything. I tried restarting X (which doesn't seem to work in Ubuntu 10.10, and tried holding CTRL+ALT+F7 too, but it just displays a few "[ OK ]" messages.

View 1 Replies View Related

Ubuntu :: The Text In Recovery Mode Console Is Unreadable?

Apr 30, 2011

When I try to load Ubuntu (recovery mode) or if I press Ctrl+Alt+F1, the image gets corrupted showing a white screen with black writing on it, but which is unreadable. Also the words seem to be spelled backwards. I'm trying to install an NVIDIA driver and I need to stop first the X server.

View 6 Replies View Related

Ubuntu :: Force Console Video Mode With Grub2 - No Monitor

Mar 25, 2010

I run a number of Ubuntu 9.10 boxes attached to multiple daisy-chained KVMs. None of the PCs are using any GUIs - they all run in console mode. I often reboot them remotely via an SSH session, etc. If a monitor isn't actually active on the PC when it reboots, Grub2 uses a low-res video mode, despite having a higher-res video mode set correctly in Grub2's configuration. If I reboot WHILE THE MONITOR is attached to the Ubuntu PC via the KVM, the video mode is set correctly as configured in Grub2's config files. If I reboot WITH NO MONITOR attached, the video mode is ignored and I'm stuck in a low-res mode next time I attach to the PC via the KVM. How can I force Grub2 to honor the configured graphics setting, despite not having a monitor present at the time it boots?

View 1 Replies View Related

Debian :: Console Display Mode Not Supported?

Feb 26, 2011

I've just tried to install X on my new debian system which had a nasty side effect.
I can see the bootcycle up to "Waiting for /dev to be fully populated." and then the screen switches into a display mode unsupported by my display. I've had problems like this many times before because the display returns it's capabable of resolutions like 2048x1536, which it just isnt. I've had to disable autodetection whenever using this display. One thing to note thought is that it's NOT X that's messing up the display. It's setting the wrong display mode even before the filesystems are mounted. And I've already uninstalled X with no change either. Also recovery(single user) mode has no proper display output either.

what is setting my display to the wrong mode?

View 2 Replies View Related

Debian Multimedia :: Can't Get To Console From The Graphics Mode

Apr 5, 2011

My problem is that I anyway cannot get to the text console when I have run the desktop environment. When I press Ctrl+Alt+Fx (where x - number of tty console), the video adapter doesn't send signal into monitor. Keyboard also stops reacting, only Magic SysRq Key works. The same result I can see when I turn off the desktop environment (I have uninstalled gdm) or kill X-server with the "kill -9" command. The only way to get to console (except window terminal) is remote connection via SSH.

The problem occurs only when I have run X-server. When I turn on the computer, I can see start messages. Since I've uninstalled gdm, I have also access to the console after I turn on my computer. I can normally switch between tty consoles, until I type "startx" command. Everything started when I've tryed to install non-free ATI video drivers. They practically worked, because I've had some problems with them (I just don't remember what problems), so I've uninstalled them and returned to the open. Then this problem apeeared. I tried to reinstall Xorg, change kernel (installed from repos), switch off the framebuffer, but it gave nothing.

[Code].....

View 6 Replies View Related

Fedora :: Refresh Rate At Console Mode?

Mar 1, 2010

I use the integrated graphics card from intel -- Intel GMA3100.

At console mode, I set the resolution to 1024x768 through vga=ask.

But the refresh rate is too low at 60hz, and my eyes are uncomfortable.

I tried fbset utility, but it doesn't work on my machine. (There is no response)

increase the refresh rate to 75hz?

View 5 Replies View Related

General :: Unable To Access Console Mode In Vmware

Feb 22, 2011

I am using a virtual pc software called VMWare workstation ver 7.1. platform win 7. I installed a redhat linux 5 in vmware. I am able to access graphical mode but unable to access the console mode (ctrl+alt+f1....f6).

View 4 Replies View Related

Server :: Disable Console Blanking In Text Mode?

Jan 6, 2010

I run a custom build of linux running kernel 2.6.24 and busybox. At the moment I'm investigating a kernel panic. The problem is that after 10 minutes the screen is blanked, i.e. it is still on but has been turned black. If you press a key then the command prompt is shown once again, but if the kernel has crashed then this won't work and any info about the panic is inaccessible. So I'd like to prevent the display being blanked. I've tried booting with 'apm=off' and 'apm=off acpi=on' kernel parameters but neither had any effect.

View 5 Replies View Related

Debian :: Unreadable Characters In Console Mode And In Keyboard Layout?

Oct 10, 2010

I'm getting a weird charset problem in a chroot'ed system that I kexec'ed into. It is especially noticeable in ncurses programs like aptitude, but it also noticeable in vim. [URL] My locales are configured to en_US.UTF-8, I have choosen my keyboard layout with kbd-config while in the chroot before kexec'ing into it, I've passed the bootkbd= parameter to the kexec'ed kernel, and my TERM variable is set to "linux". I can't try xterm because this chroot system doesn't has X.

EDIT: I just noticed that the keyboard layout I selected is not working properly. All keys work fine except the ones that are specific to my country. Instead of รง I get a weird symbol.

View 2 Replies View Related

Debian :: Console In Graphics Mode - Colors Scheme Wrong

Mar 18, 2010

I was installing some packages yesterday, I think one of them was an update for grub. (I'm using grub 2). When I rebooted, the console text was in green, not the usual white. (using gfxpayload=800x600 i.e. console is in graphics mode). I first thought maybe it was some kind of St. Patrick's day joke, but now I am getting tired of it. How do I set the color scheme back to normal?

View 7 Replies View Related

Debian :: Command To Suspend / Hibernate Functions In Console Mode?

Dec 6, 2010

I've configured my debian lenny to load first the command line, then if i want I load the X server, but doing this to that way I don't have the suspend/hibernate functions from the gnome menu, so, my question is:

what is the command to suspend / hibernate my system at any moment I decide?

View 1 Replies View Related

Hardware :: Emacs Console Mode : Change Background Colour

Mar 11, 2011

I am using GNU Emcas 23.2.1 in console mode on Konsole. It has white background colour. I want to change it to black.

View 3 Replies View Related

General :: Way Can Force To Boot Into Console Mode Before It Starts Xserver?

Oct 13, 2010

During startup (suse linux old distro) LILO immediately after stratup procedure I can see login for about 1 sec and then Xserver starts. I'm unable to kill it with Ctrl+Alt+Backspace or Ctrl+F1..So the question is: is there any way I can force linux to boot into console mode before it starts xserver? (I'm unable to modify any files since I cannot reach the consol mode)?Is there any shortcut ky I need to press during boot in order to prevent GUI from starting?

View 5 Replies View Related

Debian Configuration :: Putting Console In Portrait Mode - (Screen Rotated)

Feb 15, 2011

I have my X11 setup configured to rotate 90s counterclockwise for a portrait monitor. But when the system turns on, it's in the framebuffer console which is set to landscape mode. Is there a way to set it so that even the console is rotated in portrait mode? I'd like to do this automatically.

View 6 Replies View Related

General :: Turn Off Monitor (Energy Saving) While In Text Console Mode

Nov 3, 2010

How to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup.

The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen). But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor?

View 1 Replies View Related

Ubuntu :: Can't Start Kde Or Get A Console

Feb 22, 2011

Yesterday i fell asleep while my laptop was still on. when i woke up this morning i stared at a black screen. I tried to wake it up but nothing happened so i just turned it off.

But when i turn it on again i get this after the login screen: Xsession: Warning" Unable to write to /tmp; X session may exist with an error

After a few minutes i get the message, that my temp directory id full.

Now the problem is, that i cannot even login in console mode! i tried the "console login" mode from the login window, i tried switching the console with ctrl+Alt+F1, i even tried to start in recovery mode. But all i get is a blank screen with a blinking cursor in the middle, but i can't write anything!

View 3 Replies View Related

Ubuntu :: Gnome Don't Start - Only Console Does

May 18, 2010

I have a very strange trouble with gnome/X11/Adapter/memory, I really don't know! When I upgrade my memory to 2Gb (1Gb+1Gb), graphic mode not starting! Load only console, but gnome not load. And besides error message not showing. 'starx' command leads to black screen and nothing happends, keyboard doesn't work too. if I leave 1Gb memory, all working perfectly! tell me where I can find log-message or how I can solve that problem. In /var/log I can't found anything interesting.

View 1 Replies View Related

Ubuntu :: Start Gdm Without Starting X11 On The Console?

Aug 27, 2010

for my small home server i want the machine to NOT start x11 automatically but to enable remote logins via xdmcp.The problem: xdmcp is controlled by gdm. If i disable gdm to have no x11-login-screen xdmcp does not run...Is there any way to start gdm without starting x11 on the console?

View 2 Replies View Related

General :: Kernel Mode Setting Sets Wrong Resolution On Console/Intel GL40/several Kernels

Feb 21, 2010

Basically, About 50% of the time, the system boots and sets the console resolution to something strange, and the console renders in a small box in the top-left hand corner of my screen. This causes problems not only with the display of the console, but with the display of X as well.

I have an Intel GL40 chipset on this laptop, with an integrated GMA4500 GPU. I am using the latest stable Intel video drivers (2.10.0-1), and have tried using the git drivers. In addition, the problem has been occuring since December, when I install Arch linux on this machine, I have just now had the time to address it. So basically, the issue has persisted with all driver versions since mid-December to the latest releases.

In addition, I have tried using several kernels, including:

But the problem persists with each.

I wish I could give you relevant diagnostic information for this issue, but if I had any idea where to start...

I will gladly post any information necessary. I was going to post a copy of everything.log for a successful and unsuccesful boot, but unfortunately they put me over the posing limit by about 100,000 characters each.

I guess, on second thought, that my Intel video driver really wouldn't have anything to do with my console, now would they?

View 9 Replies View Related

Fedora :: Remove The Console-like Start Up?

Sep 8, 2011

fedora logo animation splashscreen that appeared when the Live CD was booting? Now when I boot into my Fedora 15 I get an ugly verbose console-like output and am not interested in seeing what's happening behind the scenes!

View 3 Replies View Related

Debian :: Get The Logo On The Tty Console At Start?

Aug 14, 2010

I would like to achieve to get this logo at start, exactly like this: [URL] It is normally something, but maybe there is a package for that ?

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved