Ubuntu :: Can't Start Kde Or Get A Console

Feb 22, 2011

Yesterday i fell asleep while my laptop was still on. when i woke up this morning i stared at a black screen. I tried to wake it up but nothing happened so i just turned it off.

But when i turn it on again i get this after the login screen: Xsession: Warning" Unable to write to /tmp; X session may exist with an error

After a few minutes i get the message, that my temp directory id full.

Now the problem is, that i cannot even login in console mode! i tried the "console login" mode from the login window, i tried switching the console with ctrl+Alt+F1, i even tried to start in recovery mode. But all i get is a blank screen with a blinking cursor in the middle, but i can't write anything!

View 3 Replies


ADVERTISEMENT

Software :: Start A Program From Tty1 Console To Be Executed In Tty2 Console?

Sep 8, 2010

How can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.

View 6 Replies View Related

Ubuntu :: How To Start In Console Mode

May 1, 2010

I removed gdm and kdm and my laptop started in console mode.Now I would like to get same thing - I made upgrade to ubuntu 10.4 and it starts again in graphics mode. I removed from grub menu.lst splash and quit, removed gdm and kdm - and again I receive graphics prompt.PS I removed also failsafe-x.

View 6 Replies View Related

Ubuntu :: Gnome Don't Start - Only Console Does

May 18, 2010

I have a very strange trouble with gnome/X11/Adapter/memory, I really don't know! When I upgrade my memory to 2Gb (1Gb+1Gb), graphic mode not starting! Load only console, but gnome not load. And besides error message not showing. 'starx' command leads to black screen and nothing happends, keyboard doesn't work too. if I leave 1Gb memory, all working perfectly! tell me where I can find log-message or how I can solve that problem. In /var/log I can't found anything interesting.

View 1 Replies View Related

Ubuntu :: Start Gdm Without Starting X11 On The Console?

Aug 27, 2010

for my small home server i want the machine to NOT start x11 automatically but to enable remote logins via xdmcp.The problem: xdmcp is controlled by gdm. If i disable gdm to have no x11-login-screen xdmcp does not run...Is there any way to start gdm without starting x11 on the console?

View 2 Replies View Related

Fedora :: Remove The Console-like Start Up?

Sep 8, 2011

fedora logo animation splashscreen that appeared when the Live CD was booting? Now when I boot into my Fedora 15 I get an ugly verbose console-like output and am not interested in seeing what's happening behind the scenes!

View 3 Replies View Related

Debian :: Get The Logo On The Tty Console At Start?

Aug 14, 2010

I would like to achieve to get this logo at start, exactly like this: [URL] It is normally something, but maybe there is a package for that ?

View 8 Replies View Related

Ubuntu Installation :: Vmware-server-console Doesn't Start On 11?

Jul 18, 2011

After upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:

/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT

View 4 Replies View Related

Ubuntu :: When Code Start Running On Console No Copy Paste

Oct 3, 2010

i configured the build-essential(for c compilation). and I am unable to get the output.This is what i do.(check the image) Since i wanted to copy the output from one of the tty's I tried GPM service. But i dont know how to copy it. Some says click the middle mouse button and it will copy but when i do some code start running on the console. no copy paste. How can i run JAVA programs.

View 9 Replies View Related

Fedora :: How To Prevent GDM To Start X Server On Console

Feb 15, 2011

I have a headless server, and I want to prevent GDM 2.30 from starting the graphical login on the console screen. As I use XDMCP, I still need GDM running on the server... With previous versions of GDM, I was doing that through gdmsetup, which ended with these lines in /etc/custom.conf :

Code:

[servers]
0=inactive

but it seems that it's not working anymore with 2.30...

View 5 Replies View Related

CentOS 5 :: Start A Xen Domain From Console With Xm Command

Apr 14, 2009

I need to start a xen domain from console with xm command but the 'new' sub command is missing?

[root@sambie xen]# xm new CENTOS-5.3-PDC
Error: Sub Command new not found!

View 1 Replies View Related

Debian :: Auto Start Deluge - Console That Crashed

Sep 14, 2015

Usually I start my remote deluge seedbox as a normal user

Code: Select alldeluged
deluge-console &

What is the best way to monitor those processes and bring that up when it crashed?

View 1 Replies View Related

OpenSUSE Install :: 11.3 - Dev - Console Linked To Tty7 After Kdm Start

Sep 17, 2010

I could not solve examining the start and stop scripts. When I boot (default runlevel 5) my system all log messages are displayed on /dev/tty1. After the boot process has finished and kdm is started no more console messages are displayed on /dev/tty1. Instead all console output is redirected to /dev/tty7. When I change the runlevel from 5 to 3 boot.msg shows

Code:

Changing back to runlevel 5 gives

Code:

Why kdm redirects console output to /dev/tty7 instead of /dev/tty1?

View 6 Replies View Related

Software :: Start The Jboss And Return To The Command Console?

May 25, 2010

Normally one can start the Jboss with

Code:

./run.sh -c server-name

But in this way the command console will keep hang. Now I want to write a script which calls u this command and return back to the command console. Here is what I wrote but it doesn't return back to the command console:

Code:

#!/bin/sh
MSGBP_HOME="/opt/jboss/MSGBP"
case "$1" in
start)

[code]...

View 1 Replies View Related

Ubuntu Installation :: NVidia 8600GT - Start In (Tty1) Login Console Mode

Dec 17, 2010

I tried most methods suggested on many sites to install drivers
## through the additional driver panel only
## through the Nvidia.run file I downloaded
## through the terminal using apt-get

All failed to start ubuntu gui it takes me to the console login and I noticed it says "saned disabled" edit /etc/..something. This problem made me install ubuntu again three times and every time I activate the driver then install the driver Nvidia.run or through apt-get and both leads to a black screen tty1 login. So what to do now I installed and removed many things and I won't reinstall ubuntu again. Also I typed compiz and this came on:

root@ubuntu:/home/sherbieny# compiz
Xlib: extension "GLX" missing on display ":1.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :1.0
Launching fallback window manager. I want to install properly so that I can start normally and enable the extra visual effects and the custom effects. Please elaborate the steps clearly

New Info:
When I enter nvidia-settings : server X opens and says
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart the X server. When I enter nvidia-xconfig as root and restart nothing happens and when I enter:
nvidia-detector it says none
and when I enter: nvidia-smi

Error: API mismatch: the NVIDIA kernel module has version 260.19.21, but this NVIDIA driver component has version 260.19.29. Please make sure that the kernel module and all NVIDIA driver components have the same version.
Failed to allocate an RM client
Could not allocate resources!
root@ubuntu:/home/sherbieny# apt-get update kernel
E: The update command takes no arguments

A new and very exciting error everyone now also the windows 7 that I have besides linux has also crashed and cannot open the login window. I don't know whats happening all I know is that few hours ago I logged in to windows normally now I cannot login to either one of them and the funny part is: I'm working on my thesis on this computer and I cannot work anymore and I'm supposed to meet with the professor on monday.

View 1 Replies View Related

Fedora Installation :: Booted To Console Prompt - How To Start Gnome

Mar 20, 2009

I finally got my system to boot to a console prompt. This is a fresh installation of fc10 that I have struggled to get working with my old Adaptec 2940 scsi hardware. I am a little fuzzy on the whole gtk, gdm, gnome thing. So how do I go from this console prompt to configuring the new installation with desktop?So let's say I am logged on as root on the console.

View 8 Replies View Related

OpenSUSE :: LibreOffice Will Not Start - Produces No Error When Invoked From The Console

May 4, 2011

Suse 11.3 KDE 32bit Following instructions in software.opensuse.org: Search Results I installed LibreOffice using the 1-click Install method. It will not start and produces no error when invoked from the console. Now here's the strangest part. If I left click on an .ods file produced by LibreOffice on another computer (on which it worked) KDE tries to extract it using ark even though file properties identifies it as an "ODS spreadsheet".

View 5 Replies View Related

Debian Configuration :: Can't See System Start And Stop Message From Console After Install

Sep 26, 2015

After install debian 8, I can't see system start and stop message from console ... How can I enable system message from console in debain 8?

debian 7 output
----------------------------------------------
root@demo:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .
root@demo:~#

debian 8 output
-----------------------------------------------
root@demo:~# service apache2 restart
root@demo:~# <=============================== No message (start or stop)

View 0 Replies View Related

General :: Only A Black Background With A Console Window When Start Fvwm-crystal

Mar 4, 2010

I have installed fvwm-crystal successfully but when I try to start it by just adding the codes below to .xinitrc

Code:
exec fvwm-crystal
only a black background with a console window show up.

I also put the .xsession-error here,

Code:
1 /etc/gdm/PreSession/Default: Registering your session with utmp
2 /etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -l ":0" "xxx"
3 localuser:xxx being added to access control list
4 Launching a SCIM daemon with Socket FrontEnd...
5 Loading simple Config module ...
[Code]....

View 5 Replies View Related

Ubuntu :: Start Synergy On Startup Wont Start Automatically On Server

Oct 13, 2010

Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:

[code]...

but still no dice.

View 9 Replies View Related

Ubuntu Installation :: Adobe - When Click On Icon In Start Menu Or On Desktop It Fails To Start

Oct 27, 2010

I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal

It extracted and asked me for a installation location, to which i put [~]

It then finished the installation.

But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!

View 2 Replies View Related

Ubuntu :: 11.04 Slow - Start Up Time Is 30 Minutes But It Usually Doesn't Start Up At All

May 4, 2011

I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.

I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.

I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.

View 8 Replies View Related

Ubuntu Servers :: MySql Database Won't Start - How To Make It Start

May 4, 2011

I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?

View 9 Replies View Related

General :: Start Script Bash When System Start Stop Reeboot?

Dec 10, 2009

I have 3 script BASH. I want start this script when the system start,stop and reeboot.

View 4 Replies View Related

Fedora :: Schedule A Process To Start At A Specific Time (not On Start Up)?

Jan 19, 2010

I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.

So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.

View 4 Replies View Related

General :: Start Up Script That Displays Icons On The Far Right Of Start Panel?

Sep 2, 2010

I am using Rhel5 and I'm new to linux so pardon me for sounding a bit green around the ears.Anyway..I got an error message a few weeks ago about how the start up script that displays icons on the far right of my start panel was malfunctioning and it was going to be deleted from the start-up. didn't really know what it really meant and I just clicked ok.wireless eth0 status icon as well as my amarok status icon are hidden on the start panel. How do I get it back/add that script back to the start-up

View 6 Replies View Related

Server :: DHCPD Will Start In Debug But Will Not Start As A Normal Service

Jun 7, 2010

I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.

The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)

ifconfig shows:

Code:

The interface has a fixed IP setup.

My dhcp.conf file looks like this:

Code:

When I start (try to) dhcpd via the service interface or via the prompt as

Code: service dhcpd start

I get an [FAILED] message and the following is in /var/log/messages

Code:

But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:

Code:

and /var/log/messages shows:

Code:

Why does the system ask a declaration for eth0 0.0.0.0?

View 3 Replies View Related

Software :: Samba Refuses To Start On Startup - But Will Start Manually

Apr 14, 2009

I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.

First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1

The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.

Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start

This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.

The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:

Code:

ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.

View 8 Replies View Related

CentOS 5 Server :: DHCPD Doesn't Start - How To Make It Start

Sep 2, 2010

I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !

DHCPD.CONF
ddns-update-style interim;
ignore client-updates;

[code].....

View 3 Replies View Related

OpenSUSE :: Start Apache And Ktorrent On The Systems Start Up?

May 11, 2010

i want to start apache and ktorrent on the systems start up, is there a program that will do it for me or do i need init scripts?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved