Debian Multimedia :: Can't Get To Console From The Graphics Mode
Apr 5, 2011
My problem is that I anyway cannot get to the text console when I have run the desktop environment. When I press Ctrl+Alt+Fx (where x - number of tty console), the video adapter doesn't send signal into monitor. Keyboard also stops reacting, only Magic SysRq Key works. The same result I can see when I turn off the desktop environment (I have uninstalled gdm) or kill X-server with the "kill -9" command. The only way to get to console (except window terminal) is remote connection via SSH.
The problem occurs only when I have run X-server. When I turn on the computer, I can see start messages. Since I've uninstalled gdm, I have also access to the console after I turn on my computer. I can normally switch between tty consoles, until I type "startx" command. Everything started when I've tryed to install non-free ATI video drivers. They practically worked, because I've had some problems with them (I just don't remember what problems), so I've uninstalled them and returned to the open. Then this problem apeeared. I tried to reinstall Xorg, change kernel (installed from repos), switch off the framebuffer, but it gave nothing.
[Code].....
View 6 Replies
ADVERTISEMENT
Mar 18, 2010
I was installing some packages yesterday, I think one of them was an update for grub. (I'm using grub 2). When I rebooted, the console text was in green, not the usual white. (using gfxpayload=800x600 i.e. console is in graphics mode). I first thought maybe it was some kind of St. Patrick's day joke, but now I am getting tired of it. How do I set the color scheme back to normal?
View 7 Replies
View Related
Mar 29, 2011
I recently did a reinstall on my system and I am now running Squeeze. I am currently trying to get some software running, but I believe I am having issues with the graphics requirements. The software needs an X server with 8 bit / PseudoColor mode. It is recommended to work in "8,24"-overlay mode. This was set up on my old install on this computer, so I know it is not a problem with my graphics card. But in the installation guide it says to enable this function it is necessary to add some information in the file /etc/X11/XF86Config-4. The problem is I don't have this file. I had this file in my old install, but on the fresh install it is not there. I have the /etc/X11/ directory, and it contains: directories: app-defaults, applnk, cursors, fonts, twm, xinit, xkb, Xreset.d, Xresources, Xsession.d
and
files: default-display-manager, rgb.txt, X, Xreset, Xsession, Xsession.options, XvMCConfig, Xwrapper.config
I think I've looked through everything in the /etc/X11/ directory but I don't see anything that looks like the XF86Config-4 file. Is there possibly a package that I am missing or something I need to run to create this file? I know on my old install this file was created or modified by running 'xf86config' in the command line. I've tried that, but it tells me 'command not found'.
View 5 Replies
View Related
Feb 26, 2011
I've just tried to install X on my new debian system which had a nasty side effect.
I can see the bootcycle up to "Waiting for /dev to be fully populated." and then the screen switches into a display mode unsupported by my display. I've had problems like this many times before because the display returns it's capabable of resolutions like 2048x1536, which it just isnt. I've had to disable autodetection whenever using this display. One thing to note thought is that it's NOT X that's messing up the display. It's setting the wrong display mode even before the filesystems are mounted. And I've already uninstalled X with no change either. Also recovery(single user) mode has no proper display output either.
what is setting my display to the wrong mode?
View 2 Replies
View Related
May 15, 2010
This started yesterday.I have been running Lucid since the Beta release with no problems. Yesterday, I found about 20 or so updates ready for 10.04. I looked them over, mostly lib files, so I decided to go ahead and let them update. That evening I rebooted my machine before I left for the night, and it came up with the error "Ubuntu is running in Low Graphics Mode". In a word X is totally hosed. The display is cut just left of center, with part of the windows on the right carrying off the screen to come back onto the screen to the left.
I thought maybe Xconf might have been messed up, but not sure how. The updates I applied did not do anything to Xorg; and my understanding was that I didn't need that file because I am running with an Nvidia card. I tried to "reconfigure" the X settings from the error message, that did not work. I logged into a text only terminal, and copied a good backup of Xorg.conf back into place and rebooted. Same thing, still running in Low Graphics mode.
View 9 Replies
View Related
Aug 15, 2010
I decided to use Debian for my system at work, and while trying to set up the system this weekend I've run into a major problem trying to start X11. I'm not very experienced with Linux, so there is probably going to be some huge gaps in my knowledge as I've only used Ubuntu on my netbook with only a little terminal work, so bear with me. As background info I'm using a Radeon HD 4350 and an nForce 4 board with an Athlon XP 3200 ( I think). Yeah it's some ghetto hardware but it's good enough for what I need to do at work.
Anyway, I successfully install Debian using disc 1 here, and did the Advanced Installation. As a note, I installed Debian once using the standard install, but I was trying to run a few X commands that I only found out after reinstalling need to have X-server running, which it obviously isn't in single user mode. This shouldn't be an issue since I rewrote the partition table and am not using the drive for anything else. After the install finished and I restarted the computer, after the kernel loaded my screen shows wither "Not Support!" or "Input not supported." depending on which monitor I'm using. The first message comes from a cheap Japanese tv so the engrish is understandable, but from what I can tell it's the same error message for both. First guide I tried following was this one. I completed all the steps, and my xorg.conf is currently set at those values. For people who don't want to read through the whole thing:
[Code]...
View 1 Replies
View Related
Jun 7, 2010
After installing Ubuntu 10.04 LTS over the weekend I had some problems, which I subsequently solved and thought I'd mention here.
- First, the dreaded Low Graphics (EE)NOUVEAU(0):Error allocating scanout buffer:-12 which wouldn't allow me to change my monitor resolution.
- Second, TVTime television viewer would not launch at all.
Solution to BOTH of these problems:
From Synaptic uninstall xserver-xorg-video-nouveau (experimental) and reinstall xserver-xorg-video-nv.
Now everything works!
View 4 Replies
View Related
Sep 20, 2010
I have Ubuntu 10.04 it works perfectly fine, until I boot with no screen. Then I get the "low graphics mode" and I cant remote desktop into it...
View 1 Replies
View Related
Oct 4, 2010
I cannot get my driver to work in 10.04 LTS. I've googled all around and still can't fix this. Randomly when I boot up it says ubuntu is running in low graphics mode. It was working yesterday. I had this problem before and it just randomly fixed its self. I have an Nvidia 320m graphics card with drivers from the hardware drivers program.
Heres my xorg.conf file ...
Code:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24
EndSection
Section "Module"
Load"glx"
EndSection
Section "Device"
Identifier"Default Device"
Driver"nvidia"
Option"NoLogo""True"
EndSection
View 6 Replies
View Related
Oct 10, 2010
I'm getting a weird charset problem in a chroot'ed system that I kexec'ed into. It is especially noticeable in ncurses programs like aptitude, but it also noticeable in vim. [URL] My locales are configured to en_US.UTF-8, I have choosen my keyboard layout with kbd-config while in the chroot before kexec'ing into it, I've passed the bootkbd= parameter to the kexec'ed kernel, and my TERM variable is set to "linux". I can't try xterm because this chroot system doesn't has X.
EDIT: I just noticed that the keyboard layout I selected is not working properly. All keys work fine except the ones that are specific to my country. Instead of รง I get a weird symbol.
View 2 Replies
View Related
Dec 6, 2010
I've configured my debian lenny to load first the command line, then if i want I load the X server, but doing this to that way I don't have the suspend/hibernate functions from the gnome menu, so, my question is:
what is the command to suspend / hibernate my system at any moment I decide?
View 1 Replies
View Related
May 18, 2010
Our BIOS use AMI,Memory:1GB,CPU:Z510,
then install ubuntu 9.04,GMA500 Driver,but refer Inf is:
The following error was encountered. You may need to update your configuration to solve this;
(EE) psb(0):THE STOLENbASE IS :OX1FC00000
(EE) psb(0):Screenindex is:0;
fbphys is :0x1fc00000;fbsize is:0x003bf000
(EE) Psb(0):Could not find a valid initial configuration for this screen;
(EE) screen(s) found, but none have a usable configuration;
, then I try to modify the Stolen Memory to 8MB,but result no change; I doubt BIOS need do some change ,but don't know how to do,
View 1 Replies
View Related
May 31, 2010
I have recently been experiencing some issues with the powersave on my computer. I had my computer set to put the display to sleep after 10 minutes and put the computer to sleep after 30 minutes. The screen saver also activates at 5 minutes. When I woke up my computer (hit the power button) the computer would sometimes tell me that it was going into low graphics mode. I had to reboot to get my x server back. I disabled the power save to fix the problem, but I would really like to have it back. My latest Xorg.log gives an error, but I'm not sure if the power save caused the problem (more below). I am running a computer with an Intel Integrated chipset.My questions:
What caused the x server to crash?Should I post a bug report on Launchpad? If so, how? (im a bit of a noob as far as bug reporting)How can I fix the problem?Xorg.log:
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
[code]....
View 9 Replies
View Related
Aug 5, 2010
I made a backup of xorg.conf and added Xinerama and the other configuration items I needed. X failed to load. Then I copied my backup to xorg.conf and...X failed to load. Then I tried booting up in safe graphics made, and X failed to load. I tried dpkg-reconfigure xserver-xorg, but it did nothing. Literally nothing -- no error, no output, no nothing. Then I saw someone who had suggested to apt-get remove --purge xserver-xorg, then reinstall it, and X failed to load.
I am at a complete loss. I have now read that the dpkg-reconfigure xserver-xorg is no longer used, that the os is supposed to autodetect everything now, but in that case I don't see how I will ever get dual monitors. In any case, I can live without dual monitors, but I need at least ONE monitor, and I have no idea how to get the configuration working.
View 2 Replies
View Related
Jan 6, 2011
After updating Ubuntu 10.04 I'm getting this error message. "Ubuntu is running in low graphics mode. Failed to load the NVIDIA kernel module." I have a NVIDIA Geforce 220 video card and previously installed the NVIDIA drivers. All was working well until this last update. There are countless number of forum messages on how to fix this but my problem is compounded because when I get this message the machine appears to lock up.
It doesn't respond to any keyboard commands such as Ctrl-Alt-F1. I am not able to get to a command prompt at all. This was a fresh install of 10.04 so I believe it uses GRUB2 which automatically boots into the operating system with no menu. Is there a way to stop GRUB2 from automatically running the OS and giving me a menu? I really don't want to reinstall.
View 2 Replies
View Related
May 26, 2011
I have a dual boot xp -ubuntu - AGP ati 2600 series radeon. Intel 8300 dell. The message comes up after login "ubuntu is running in low-graphics mode". I hit ok and I get 5 choices and none of them work.
1) run ubuntu in low-graphics mode.
2) reconfigure graphics.
3) troubleshoot the error.
4) exit to console login.
5) restart X.
View 5 Replies
View Related
Feb 15, 2011
I have my X11 setup configured to rotate 90s counterclockwise for a portrait monitor. But when the system turns on, it's in the framebuffer console which is set to landscape mode. Is there a way to set it so that even the console is rotated in portrait mode? I'd like to do this automatically.
View 6 Replies
View Related
Jun 5, 2010
I downloaded a linux kernel from linux.org to check what is the kernel is about, i clicked on make_file or make sth .. and in the same session i downloaded a program called login window.
Now the problem is that the system boots ok, it gives me a msg saying that system is running in low graphics mode, when i press ok i get a few options like troubleshootin or restart x or use back up configuration .. and nothing works .. when i press start normally it never stops loading .. i can see the terminal when clicking ctrl + alt + f1,f2 ... but when i press ctrl + alt + f7 or return back to the desktop ubuntu is still loading .. it never stops loading.
And after using ubuntu for a while i really hate windows 7 .. i have it on the system, so is there a way to fix this problem?
View 6 Replies
View Related
Jun 26, 2010
When I leave my computer and later return, depending on how long I've been away, I find the screen-saver running, the screen turned off, or the computer suspended, i get the error as specified below on a black screen:
Quote:
Ubuntu is running in low-graphics mode.
Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself.
The message gives several options. Despite some experimentals, The only solution which I have found is to reboot and everything becomes fine as before.
View 9 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Nov 25, 2015
i need create a DVD data from shell.I try this but nothing: # genisoimage -V "DVD1" -R -hide-rr-moved -J DVD1_Shapter1_8/ | wodim -v -eject dev=/ dev/dvd1 -the folder only contain 8 video in .mpg extension,
View 1 Replies
View Related
Mar 10, 2011
I'm using mplayer with shell-fm, in my shell-fm.rc I have the line
extern = nice -10 mplayer -really-quiet -ao jack -cache 512 -noar -nojoystick -nolirc -noconsolecontrols -nomouseinput -demuxer lavf -lavfdopts format=mp3 -af-adv force=5:list=resample -af resample=44100:1:2:extrastereo-1.5 -
This to me at least produces a pleasant audio output but despite the -really-quiet option mplayer is still outputting text, generally something like
[mp3 @ 0xa3f5380] max_analyze_duration reached
I've also tried the -msglevel all=-1 option and had a play with the MPLAYER_VERBOSE environmental variable, all with no joy.
View 6 Replies
View Related
Aug 22, 2011
Just as the title says: I installed iceweasel 6 in debian squeeze (via mozilla.debian.net) and while errors and requests are captured in the web console, I simply cannot use it to evaluate arbitrary javascript I type in it.
Does anyone have this problem as well? It's been like this since v5 as well. I already tried purging and reinstalling, as well as running with another profile.
View 1 Replies
View Related
Dec 19, 2014
When I try to log in the screen just flicker and I get back to the kdm login.
If I use console login it just turn black and after a while it get back to console and no protocol specified shows up together with xinit: giving up.
If I use root there is no problem and I can get into the desktop so it must be a user configuration problem or.....
View 5 Replies
View Related
Jul 14, 2010
I wanna save font from SystemRescueCD's VC and set it up in Ubuntu's VC. How to save it? 'Man' doesn't make it clear to me. Is it
setfont -o [file]
or
setfont -O [file]
to save the font?
View 3 Replies
View Related
Jan 26, 2010
not sure exactly when this broke, but for some reason I'm not able to use CTRL-ALT-F1 anymore to fall back to the first virtual console.I can kill X with CTRL-ALT-BACKSPACE just fine, but I'd like to be able to get a normal shell to kill things when I've messed too much with graphical stuff.
View 4 Replies
View Related
Aug 31, 2015
I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
View 2 Replies
View Related
May 1, 2010
I removed gdm and kdm and my laptop started in console mode.Now I would like to get same thing - I made upgrade to ubuntu 10.4 and it starts again in graphics mode. I removed from grub menu.lst splash and quit, removed gdm and kdm - and again I receive graphics prompt.PS I removed also failsafe-x.
View 6 Replies
View Related
Aug 14, 2010
My problem is that I am trying to install an Nvidia driver on ubuntu 10.04, and I can not access my console mode by pressing ctrl alt f2. When I press that keystroke my cursor will disappear till I press alt f7.
View 2 Replies
View Related
Jan 26, 2011
When I try to play a dvd and give mplayer no options, it defaults to "X11" for the video output, which maxes out the cpu. To get around this, firstly I tried to play the dvd using "cvidix" in the console.
I used the following command:
mplayer -ao alsa -vo cvidix -fs -framedrop -stop-xscreensaver -dvd-device /dev/dvd1 dvd://1
This played the dvd, but the console text was still visible over the top of the movie; i.e. mplayer was playing in the layer beneath the console text
Then I tried using xvidix in X:
mplayer -ao alsa -vo xvidix -fs -framedrop -stop-xscreensaver -dvd-device /dev/dvd1 dvd://1
This gives a green line about 5mm thick down the right side of the screen, but other than that it is ok.
View 6 Replies
View Related
