i buy a dected server and i want control my server with UltraVNC Viewer the company host is give me just user name is root and password of ssh and when i ask him to instal for me vnc server he say sorry man i dont suport software.so can you help me how instal vnc server by putty (ssh)
View 8 RepliesI am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies View RelatedENV: openssh-server-5.4p1-1.fc13.i686 Problem: I am unable to ssh using Putty (when using ssh-auth/pki) to a fedora box . I get the message: Server refused our key. Here's what I tried so far:
- Tried generating rsa (as well as dsa) keys on the linux server and put the generated public key in the ~/.ssh/authorized_keys. Then I converted the private key using PuttyGen.
- Also, tried generating keys using PuttyGen and then converted the public key and placed it on the server
- Configured the sshd server (ssh_config) for using RSAAuthentication=yes. Tried all combinations and purmutations; however, I still get the "Server refused our key" error.
was trying to access the server through putty, it immediately closed connection.i tried this a couple of times and still the same problem.
View 2 Replies View RelatedI can't figure out why I keep getting kicked out of the ssh session almost immediately after login to an ubuntu 9.10 server (32bit).See the screenshot. I just installed this server and didn't make any ssh config options. I thought it would work right away.When I ping that server I get sporadic responses where some packets are lost. It's an old Dell poweredge 1400.where should I start troubleshooting? Authentication? Hardware?
View 4 Replies View RelatedI setup logging in through putty client with keys, and password disabled, could log in from all machines on my network (xp and 7) with putty.When I finished hut down the server.Today I turned on the server box and thought I'd try logging in through putty. It kept telling me the server was rejecting my key.I plugged in a monitor and keyboard into the server and logged in via password then had no problem logging in through putty client.Question is, every time I shut the server down do I have to plug in the monitor and keyboard, then login, to be able to login remotely?
View 8 Replies View RelatedI want to connect to my debian server through putty, but only i got is the message - Network error: connection refused. I try with different setting on the server and in putty, but there is no effect.
Here are my settings: for the serveer i use [URL]
Code:
Port 22
# listen address i changed to accept all addresses
ListenAddress 0.0.0.0
[code]....
i have no /etc/ssh/ssh_host_key file and try to comment it but with no success. All other lines at the config file was commented.
I use PuTTY to connect to an Ubuntu Server (VPS). I would like to use Tab-Completion when I'm working with the command line on Ubuntu Server... How can I configure it?
View 1 Replies View RelatedI am access my linux box remotely using putty. I ran some build process on the remote machine. I lost my connection and now I had to re login using putty. I dont know if my process has finished or not. How will I check that.
View 2 Replies View RelatedSo when I try to connect to my ubuntu server with ssh like thisX@dell-desktop:~$ ssh servername -P 1934X@servername's password: Permission denied, please try again.but when I use putty (yes with the same port number and the same settings)it works fine. This didn't start happening until my friend did a reinstall on the server, he didn't have a clue as to why it would do this.
View 6 Replies View RelatedI use centro 5 to run a game server with the command ./srcds_run quit -game cstrike -nocrashdialog +map de_dust2 +maxplayers 36 +ip 95.154.192.34 +port 27015 -tickrate 67
which then starts a 36 slot CSS game server but as soon as i close putty it ends now i tried nohub ./srcds_run quit -game cstrike -nocrashdialog +map de_dust2 +maxplayers 36 +ip 95.154.192.34 +port 27015 -tickrate 67 and ./srcds_run quit -game cstrike -nocrashdialog +map de_dust2 +maxplayers 36 +ip 95.154.192.34 +port 27015 -tickrate 67 > srcds.log 2>&1 &
i'm woundering if it something to do with centro 5 why nohub isn't working becouse it works for others either
i can't connect to my server using putty.
I have a virtual dedicated server, running - Linux Red Hat Fidora core 6- Pentium 4, 3ghz
I'm attempting to use Putty to log in SSH, but I'm getting an error.
Saying the sever unexpectedly close network connection.
I don't know if this has anything to do with it. This is a new computer, that hasn't logged in using putty before. Also I'm on a home wireless network. It dosen't seem to be a firewall issue, the error message pops up, when the firewall is disabled.
And I just had Go Daddy do a reboot. Oh, and I think I might have entered my password incorrectly a few times, last night.
I remember the Go Daddy rep, saying that my IP address may be flagged, but that it would unfilter and unlock it self within an hour or so. It's been over 24 hrs.
Before the password issue, i was able to log in.. But i can't now.
Others can log in. So there unable to duplicate the problem.
I'm new to Linux, and SSH.
Any help
I'm trying to install some software...
I've been allowed to work on the server of a forum. I was given the username and password, and with them logged in successfully on the server using PuTTY, but now I'm not sure what command I use to do anything to the users on the forum For example how would I change someone's username or password, etc.
View 3 Replies View RelatedI am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
I have a server program in ubuntu which i run using putty remotely. My problem is that when i closes my putty window, my server automatically closes and stop working.
I want that once i start my server it remains on when i closed my putty window.
I'm trying to do a ssh connection (using Quest Putty) from Windows to Linux. As linux are joined to Active Directory, is possible to do a SSO (using kerberos). If I connect from linux to linux using ssh, it works fine. If I connect form Windows (Win7) to Linux using Quest Putty or Centrify Putty, an error is displayed:
Code:
C:Program FilesCentrifyCentrify PuTTY>Plink.exe -A -K -v serverl001.jed
Looking up host "serverl001.buss.red"
Connecting to 10.16.44.234 port 22
Server version: SSH-2.0-OpenSSH_5.4
We claim version: SSH-2.0-PuTTY_Release_0.60_(Centrify_GSS_1.4)
[Code]...
I can't connect to my Suse server by ssh (using putty) cause console shows me this message: connection reset by peer some times, other times It let me type the user but when I going to enter the password It reset the connection. What I did?? Reinstalled the ssh, but everything was same, the problem still appears. So I reinstalled the Operating System, now but when I going to connect to server the problem appears again! What could be the cause of this behavior??
View 3 Replies View RelatedI gannot connect to my Linux server using ssh and get Server refused to allocate pty message. Before it was working fine and today the problem appear, i don't know why this problem. Not that i'm new on linux system. my linux version is Linux 2.6.18-8.el5. I only found the same topic in this forum but not find solution, i try ssh with -T but still not working.
View 1 Replies View RelatedI have a database in SQL Server 2005 in my local Windows System and I want to import this database to my linux (ubuntu) server remotely using putty.
View 5 Replies View RelatedI would like to learn basic linux commands and editors (eg : vi). Am using windows and it is difficult for me to install linux in ma laptop. So is there any free linux login servers available in internet so that I can login to server with putty and try using basic linux commands and editors.
View 4 Replies View RelatedI am tring to instal the updates for some time now, but I am getting a error
Quote:
Also when I try to instal programes from Ubuntu Software Center it doenst do the download, and said to check the internet connection , althought that is fine (I am posting this).
Hello everyone! I use UBUNTU 9.10 (karmik). But I am totally disappointed!!! Everything is too slow! I want to install UBUNTU ULTIMATE 2.0. Can I do that without loosing any data? (music, movies, etc) Do I have to store my data in another HDD?
View 2 Replies View RelatedInstalled Karmic or upgraded to it, and the Time Date in the upper right loses time now after upgrade to Karmic. Worked fine before upgrade so it is not hardware.
Ubuntu 9.10 (karmic)
2.6.31-21-generic
4.4.1 (i486-linux-gnu)
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
GeForce 7300 GT
When I complete the download of the platform on USB it says error in downloading "casperfilesystem.squashfs." I go ahead and try to go through the steps of running unbunt, since it download on the USB, then at the last moment it says cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)
View 1 Replies View RelatedI have 6 drives in raid 5 for data. 2 drives in raid 1 for boot. During install I set my 2 drives as raid 1 and had them formatted. I also told it the 6 drives were raid 5 but did not tell it anything else besides not to format them. When I booted for the first time I found that it was rebuilding the raid 5 and the file system type is unknown.
View 9 Replies View RelatedTrying to install openFOAM on natty desktop seems to be a problem adding openFOAM to the repo and later some compilation error
View 1 Replies View Relatedi am download pdfsam-2.2.1-out.zip in linux forum but i did't know the how to install this software in my red hat computer
View 1 Replies View RelatedI have a system which is hardened so that there is no yum/rpm command installed and I need to install gcc in it. I don�t have any prior version of GCC present in the system.
I am running with cenos release 5.3
I am trying to install gcc so I can compile C++ on a Virtual linux machine I have on my pc. I went to the GNU website and downloaded gcc-g++-4.5.0.tar.gz, unzipped and un-tarred it. This left me with a folder named gcc-4.5.0 which itself contained two folders. One named gcc and another named libstdc++-v3. From trying to follow a (not very clear) guide online I created another folder in the libstdc++-v3 folder named objdir into which I copied the configre executable. I then tried to run it here and was told that I was missing an install.sh file.
found one of these from somewhere else on my machine and copied it into the libstdc++-v3 folder. Now when I try to run the configure executable from the objdir folder I get a message saying "configure: error: cannot run /bin/bash ./config.sub.Basically all I want to do is get gcc up and running so I can compile some codeWhat I have been doing so far is probably way off the mark but its as far as I could get from following stuff online.
I had a spare computer (Dell Optiplex GX270) which I had installed Centos 5 on and have been setting up asterisk (telephony) on it. My main computer has broken down and I need to load Windows XP back on to the Optiplex.
I put the Windows XP disk in the drive and directed the bios to boot from the cd. I get the message "Please wait while windows inspects your current hardware configuration" and then after about 10 seconds the screen goes blank (the cd also slows down and then stops) and then the systems seems to just hang.
If I take the cd out and boot from the hard drive Centos loads normally; therefore I'm assuming my problem is not a defective hard drive.
I've spent quite a bit of time searching online for a solution and although there seems to be several different situations where the above can occur, I'guessing that my ssues are related to either partions/mbr and or the bios/cmos. I'm really new to Linux and not knowledgable on partitions and cmos so I'm hoping someone could help me out here.
I've checked in the bios and could not find an option to restore the settings to factory defaults. Should I pull the csmos datterry out? Does this restore the bios settings to factory defaults?