I attempted to install from source. Following the instructions on the gnome-do website verbatim, I received several errors. Gnome-do was installed (in Gnome menu), but would not run. Realizing I was over my head and was out of time, I ran "sudo make uninstall", restarted my machine for good measure, then installed gnome-do from my software manager. It still won't run. Running gnome-do from terminal gives the same error as when I attempted to install from source:
Unhandled Exception: System.InvalidOperationException: Could not read add-in description
at Mono.Addins.Addin.get_Description () [0x00000] in <filename unknown>:0
at Mono.Addins.AddinSessionService.CheckHostAssembly (System.Reflection.Assembly asm) [0x00000] in <filename unknown>:0
[Code]....
I used purged gnome-do and plugins, restarted, and reinstalled, but am experiencing the same problem.
After downloading four .bz2 source files containing the sources for kdevelop-4.2.2, I tried to follow Soul Singin' HowTo without success apart from receiving this error:
currently I'm using a kernel from kernel-mainline [url], because thermal won't work satisfying with the shipped kernel from ubuntu and would like to install tp_smapi (including modules hdaps and thinkpad_ec), but the installation failed, because the system pretending, that kernel-headers missing.
Code:
Results in telling the system, that kernel-headers are installed.
Code:
But then the upcoming dialog-box of module-assistant telling me, that the kernel-headers are not installed and therefore installation of tp_smapi fails.
I just installed opensuse 11.4 64 bit. Compiz and everything was working fine on my ati card (mobility 2600) with the default radeon drivers. I added the gnome 3 stable repo, updated fine. But when I rebooted I get booted into the fallback with no 3d effects and it says "gnome 3 failed to load" What gives? The drivers were working fine with full acceleration. I know gnome 3 works on this card, I tested it on the fedora live cd just fine.
Had a boot failure last night; first one for 11.3 64 bit:
Aug 23 19:32:06 suse1 gnome-session[4822]: WARNING: could not read /etc/xdg/autostart/ksmolt-autostart.desktop Aug 23 19:32:06 suse1 gnome-keyring-daemon[4800]: unable to create keyring dir: /home/rthornto/.gnome2/keyrings Aug 23 19:32:06 suse1 gnome-keyring-daemon[4800]: couldn't write to file: /home/rthornto/.gnome2/keyrings/login.keyring: No such file or direct ory
I'm using CentOS 5.5 and trying to compile RPM 4.3.3, this is required for our target board specific needs. When I did compile RPM 4.3.3's source I got the following error. How to rectify this one?
error: selinux/selinux.h: No Such File or directory
I have run into problems building GNOME Shell from source on the Lucid Lynx. The Lynx has GNOME 2.30, correct? Well, ~/gnome-shell-build-setup.sh tells me that "GNOME 2.26 or newer is required to build GNOME Shell" when I already have 2.30. Just look at this screenshot [URL]...
I want to build my own GNOME. The problem I have is that I cannot find the tarball for the GNOME source code. Another thing I've read on their website is that the way to build it is not the conventional './configure, make, make install', and that it has to be done using a multi-phase process. Is this correct?
I'm trying to do the simplest thing. Compile XMMS. I navigated to the folder containing the extracted source and ran ./configure. That failed, so I remembered to install the build-essential package.
After that, I continued and got this output:
It said I didn't have glib installed, whatever that is. I did "apt-get install glib" and it told me it couldn't find the package called "glib". I thought, "Yeah, that seems a little too broad of a package name".
So then I went to Synaptic and did a search for "libglib" and noticed I already have libglib2.0-0 installed, as well as libglib2.0-data and libglib-perl.
How can I get this to to work correctly? I know the process should be ./configure, make, and then make-all, but I get stuck on the ./configure step.
I'm just curious if anybody knows how to change the default settings in gnome-mplayer from it using video0 as the video input (which is my built-in webcam), to say video1 (which is my external usb tv tuner). There is no gui option for this.
My issue is not being able to use it for analog video, though it's not a huge deal because I figured out the same very thing for tvtime (video0 to video1). It'd just be another option.
I just started to use debian at what i would call full speed as soon as i received my copy of the debian 6.0.0 DVDs. i installed it on two offline desktops, one for a friend. i have been able to install certain softwares that don't come along with the distribution such as firefox 4, openoffice 3.3, the latest jdk_update_24, and others, and i've been able to configure them to work well i think... but now, i learnt of the new gnome 3 that has been released recently. i've ofcourse downloaded all the source files at [URL] but now am facing a problem of how i can install these on to the debian computers (they don't have any internet connection).
I am trying to install form source (gnome-voice-control-0.4.tar) the voice recognition tool. ./configure seems to go fine, the Makefile has been made bur when I try to install by typing make some errors appear.
code:
Quote: [root@piotr gnome-voice-control-0.4]# ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes[code].....
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
System: Ubuntu 9.10, upgraded from previous versions Architecture:64 bit Filesystem:EXT4 DE:Gnome
Occurance of the problem: After using GParted to move unallocated space to a ntfs-filesystem. Yep. I did it again. No oops this time, for I have no clue why this error appeared and why I cant get to my desktop. No recent updates that couldve borked the system.Lately I have had to work quite a bit with some Windows-only programs, and I found myself out of harddisk space pretty soon, as for the last year or two, I worked almost exclusively with Ubuntu and only had a minimally sized partition set up for Windows. I needed room. No problem, I thought, I will start up GParted, move some of the unallocated space to the NTFS partition and be done with it. I have performed tasks like that before, so no problem should occur.
After rebooting I got to the grub menu. All options were there. Looks nice. Except for the fact that Windows did not want to start, some MSDK (sorry, did not write down the name) file or whatever was missing. (I heard this is a Vista problem and the file connected to the error does not even exist on any XP system). Worse than XP not starting was the error message I got from my login screen.
"The configuration defaults for gnome-power-manager have not been loaded. Please contact your administrator."
So I did. I talked to myself and had to admit to the user that I did not have a solution at hand. User upset, administrator too. (They are no longer talking to each other.) Login is accepted, but after that nothing. Just a black screen with a mouse-pointer that can be moved around. Nada mas. Before getting to the login screen, there was something else that drew my attention, but again, I did not know what it meant. The error-message:
fsck from util-linux-ng 2.16 is udevd [527]: NAME: "%k" is superfluous and breaks kernel supplied names, please move it from /etc/udev/rules.d/51-hso-udev.rules:124 * stopping the Firestarter firewall... 9.10: clean, 467963/3055616 files, 8323370/12205383 blocks
[code]...
SuperGrub. It allowed me to boot, but thats it. No further steps taken, if only because SuperGrub does not support the EXT4 filesystem (yet?).I have heard people were able to get to their desktop after receiving this error by using a root account they had previously created. I dont have one, so that would not work.So, I did the three finger salute, stopped the gdm from the terminal, moved gconfd to somewhere else, hoping a new file would be created and the problem would be solved with that, but no. Restarted gdm, it worked but the problem remained.
Ok. Perhaps a reinstall of the GDM might work, I thought. Well, it might, but the problem is I have no internet connection and the usual way I connect my laptop is through phone-tethering. Not having a desktop will not allow me to make a connection.So, sudo apt-get --reinstall install gnome-power-manager did not work as an active connection is required. Also I dont know if that is going to solve the problem.So now I am in the dark. I have booted up a live CD, mounted my HD partition in order to check my /root/.Xauthority, but I could not even find the file.
I refuse to believe there is a serious problem with my Ubuntu install. As far as I can see, there is a problem with some config-files but the system itself looks OK. Reinstalling is preferably not an option, as I love my install and have been working with it for a long time now, with lots of user data on it as well. Also, I have not seperated /HOME, which makes a reinstall a bit of a drag. I am certain there is an easy fix somewhere, someway, but I would need some advice from someone more knowledgable than I am. The only thing I could think of is to find a way to reinstall gnome-power-manager without an active connection. I can download the .deb file with some other device than my laptop but I would not know how to add that to /etc/apt/sources.list. Also, I kind of doubt that the problem lies within a faulty power-manager.
I've just bought this laptop Asus G750JZ with Intel Haswell i72.4 GHz and Nividia GTX 880. I have this problem with Debian: after i install the OS it says that Gnome 3 could not be loaded. I guess it doesnt recognize my video cards(Intel HD 4600 and NVidia 880). How to make Debian running in optimal condition on my laptop.
As someone says,I install fedora 15 in VisualBox,and before installing I choose "Enable 3D acceleration",but when entering the desktop,I just see "Gnome 3 failed to load".Earlier of today,I try this in VMware Workstation,there is the same question. Why this happens?Is that means I will miss the Gnome 3 in VisualBox and VMware Workstation.....for God's seek...
Then by issuing lynx --source url | bash command as root i could install gnome.There was no error during installation.Then after reboot i try to log to gnome by issuing gdm command.It ask my user name and password. Then there was a light blue colour screen and it become bright green colour .There was no error massages.I try several times and got the same result.I am using commercial nvidia driver .What could be the error.What should i do next.
I have built my own custom Fedora 15 spin, the problem is that every time it show me GNOME 3 Failed to Load message dialog with the following message: "Unfortunately GNOME 3 failed to start properly and started in the fallback mode ....." Is there anyway to disable this dialoag?
I am having some problems installing Fedora 15 64-bit. I use the install DVD. I have an AMD Phenom and a NVidia 8600GTS. When I install using the normal method, my screen freezes somewhere in the settings screen for choosing the computer name. If I use the basic video driver for installing I have no problem. However after everything is installed, and Fedora starts, Gnome says that it failed to start and some features are not available.
I found some information at [URL] that I tried. However after installing kmod-nvidia and rebooting I no longer see any graphical display. A lot of text is on the screen without any error, but no x-windows appears. What can I do to install Fedora correctly and have a good working system? Is the 32-bit version easier to get it working? How can you recover from a system that does not start? What I could do to recover from it.
when i ran jhbuild build as a normal user, i found below messages before it failed
Code: Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4 progtest.m4 from the /aclocal directory to your autoconf macro directory or directly to your aclocal.m4 file. You will also need config.guess and config.sub, which you can get from ftp://ftp.gnu.org/pub/gnu/config/.
I was recently watching an avi file, when suddenly, my tower (the computer) got really, really noisy. That's pretty normal when I'm on my Windows side, but very unusual for Ubuntu Linux. I knew something was in the wind then and there. So I exit my Dragon Player to discover that ! gasp ! KDE is down, replaced with the default wallpaper for GNOME, and no bars anywhere. I reset the system only to find that it refuses to boot into either KDE or GNOME. Having been in something similar to this situation before, I decide that Xorg.conf must be broken somehow. In an effort to get to the GUI where I can safely edit it, I try reinstalling KDE and GNOME, which both failed.
So I try installing xdm...which results in only being able to access the login screen for XFCE. Whenever I try to log in using the correct credentials, it simply refreshes the log-in screen.
1. Is this, indeed, the sign of a broken Xorg.conf, or a broken Xserver in general? Or is there something larger that was changed?
2. How do I fix this? (I've already tried using Ubuntu 10.10 64 in rescue mode, but I can't seem to change anything in the system itself.)
3. Is this possibly a result of upgrading straight from 10.04? Is it possible that having both KDE and GNOME contributed to this?
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
