Ubuntu :: Gateway FPD 1500 Monitor Not Supported

Apr 22, 2010

I was running Ubuntu 8.10 on what used to be a server & is now serving as a stand-alone Ubuntu machine. It's got an MSI motherboard with a Pentium 4 3.2 Ghz processor & 2 Gig RAM. The video card has DVI & VGA outputs & this is where the problem begins. The monitor is a Gateway FPD 1500 1024x768 flat panel & originally appeared not to be supported by Ubuntu but I discovered if I simultainously connected both the flat panel via DVI and my shared VGA monitor (the VGA monitor serves another Linux box and an old WIN 98 machine via a switching box) I could get the display to first show on the VGA and after login it would appear properly on both. But as support for 8.10 is ending I upgraded to 9.10 via the update manager.

Now if I try to boot up using either the DVI Gateway flan panel alone or with it and the VGA connected, the machines hangs after login. However, if I disconnect the the DVI Gatteway monitor, the machine boots normally. Obviously, the necessary driver was removed during the upgrade but I can't find a Ubuntu driver for this monitor & connection type, does this mean I am stuck with it like this? I would prefer to use the flat panel as the picture is easier on the eyes and the VGA monitor is needed for other machines. I also tried a DVI to VGA adaptor and it wouldn't work meaning the monitor is DVI only.

View 1 Replies


ADVERTISEMENT

Networking :: Monitor Gateway Connections - Iptables?

Jun 3, 2010

I want to find out which server/service a streaming box connects to and maybe also take a look at some packets. The box connects to the Internet via a Linux gateway running Debian I have root access to. I have some basic knowledge about iptables, tcpdump, netstat etc. but couldn't yet figure out how to get this info.

My first approach was with netstat, but this traffic seems not to be visible (which somehow makes sense to me). My next guess was that with iptables it should be possible to log this connections, however I couldn't yet figure out how to.

View 1 Replies View Related

General :: Input Not Supported Message When Monitor Is Powered Off Then Back On?

Mar 27, 2010

I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time).

Specs:
Acer X203w monitor
Radeon 9600 Pro Video card
Linux Mint 8 (Helena)
Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor)
Refresh Rate 60hz

[Code]...

I just had it happen again. I tried unplugging the DVI cable from the back of the computer and then plugging it back in. The monitor then displayed the desktop properly. I'm not sure if that makes a difference or not in what I may need to change settings-wise.

View 1 Replies View Related

Hardware :: Dell Monitor 1909W Is Not Supported During CentOS5 Install

Feb 24, 2010

I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying " The current input timing is not supported by the monitor display.
Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "

However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.

View 2 Replies View Related

CentOS 5 Hardware :: Dell Monitor 1909W Is Not Supported During Install

Feb 24, 2010

I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying: " The current input timing is not supported by the monitor display. Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "

However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.

View 2 Replies View Related

Ubuntu :: Does Not Recognize Epson Action Laser 1500

Apr 18, 2010

I am trying to SETUP the following printer within Ubuntu Epson Action Laser 1500 - it is a relatively older printer, and just can not seem to figure out how to get it to work - does not seem to be recognized by Ubuntu - was my primary printer for years when using XP, so know it works

View 1 Replies View Related

Ubuntu Networking :: 10.10 - No Wireless / Wired Connection On Dell Vostro 1500

Apr 6, 2011

I've been running Ubuntu 10.10 on my Dell Vostro 1500 for awhile, one morning I tried to get online & no networks would show up. I tried plugging in my ethernet cable & still nothing. Just the two lights by the plug stay lit up. If I boot into Puppy Linux the wireless works just fine. I was using the B43 driver before I had problems, then when I was trying to get it to work I accidentally deleted the driver. I cannot figure out how to get my internet working again in Ubuntu. I don't want to be stuck using Puppy Linux forever! I don't really know many commands, normally just search online how to fix problems, but it's pretty hard to do when I have to boot back & forth between operating systems to find things to try.

View 9 Replies View Related

General :: Search For A Pattern Between Lines 1500 To 2500?

Jan 25, 2011

I have 8 files, and each contains around 2000 lines. I want to search the particular word in these files between line number 1500 to 2500.

The output should look like:

sample_1.txt :
1510:declare var testing
sample_2.txt :
1610:declare var testing
sample_7.txt :
1610:declare var testing
sample_10.txt :
1710:declare var testing

Is it possible to use grep for this task?

View 4 Replies View Related

General :: Modem On Dell Vostro 1500 Is Not Recognized

Nov 21, 2010

I have installed openSuse 11.3, my computer is a Dell Vostro 1500, it has a modem, but is not recognized between the devices. I do not know why. I have not the slightest.Please, someone with enough intelligence to be humble to explain clearly and explicitly that the system can I identify and mount my modem, and can make use of it.If by chance you need some additional information, please specify to me how I can get to the place in this thread.

View 4 Replies View Related

Ubuntu :: Over 1500 Fonts - Move Them To My /usr/share/fonts Folder

Jul 3, 2011

I have a folder with over 1500 fonts, I would like to move them to my /usr/share/fonts folder so that they can be used. Some are from Windows, some are just random extras. I've installed the msttcorefonts, but there are quite a few missing that make some wen pages look different.

How can I go about putting the fonts from my folder, into the appropriate /usr/share/fonts folder to be used? And how can I move them all? I can't drag and drop them, and mv FONT_NAME /usr/share/fonts for all of them will take a month or two. Is there a way to elevate my self to be able to just drag and drop them all? And which folder would they need to go into for them to be used in Chrome and Firefox?

View 5 Replies View Related

Ubuntu :: Xorg Doesn't Detect Monitor / Won't Display Higher Than 800x600 On A 1400x900 Monitor

Apr 3, 2010

I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.

Here is my current xorg.conf.

Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

[Code]....

View 1 Replies View Related

Ubuntu :: Change Default Monitor When Dual Monitor Is Enabled

Nov 19, 2010

I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.

View 1 Replies View Related

Ubuntu :: Compiz - Dual Monitor Wallpaper On Single Monitor ?

Dec 10, 2010

Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.

View 2 Replies View Related

General :: Detect Monitor (Ubuntu 9.10, It Is Showing Unknown Monitor )?

Apr 20, 2010

I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.

View 3 Replies View Related

Ubuntu Multimedia :: Disable Secondary Monitor Quickly Other Than Loading Up Nvidia-settings And Disabling The Monitor Every Time?

Jun 29, 2010

Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.

Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.

View 1 Replies View Related

Ubuntu :: Disable Compiz On One Monitor In A Two Monitor System

Feb 23, 2010

I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf

Quote:

Section "Extensions"
Option "Composite" "Disable"
EndSection

Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.

View 2 Replies View Related

Software :: Mouse Click On Monitor 1 Kills Full-screen In Flash On Monitor 2 ?

Feb 23, 2010

I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:

If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?

View 12 Replies View Related

Fedora :: 11 With Monitor - System - Preferences - Display Shows Unknown Monitor

Oct 16, 2009

I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.

Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.

However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.

I am not sure if my original is related to the Unknown Monitor.

I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.

My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.

View 5 Replies View Related

Fedora :: External Monitor Won't Work - Both Monitor And Laptop Screen Black

Aug 7, 2011

I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.

I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.

I have a Thinkpad E420, Fedora 15

View 14 Replies View Related

Fedora :: Set Totem Player To Open In External Monitor And Not In Built-in Monitor

Aug 11, 2011

I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?

View 1 Replies View Related

Fedora Hardware :: External Monitor Not Detected - Dell Laptop - Monitor

Aug 17, 2011

My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.

My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.

Code:

How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.

View 5 Replies View Related

Hardware :: Dual Monitor - 2nd Monitor Not Coming Up - Xorg.conf Missing Something?

Oct 19, 2009

This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.

Is my xorg.conf missing some vital line(s) or setting?

My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.

I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?

lspci:

Code:

Code:

View 3 Replies View Related

OpenSUSE Hardware :: Triple Monitor Setup: X Crashes When Moving To The Second Graphics Card (third Monitor)

Oct 22, 2010

This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).

This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.

View 3 Replies View Related

OpenSUSE Hardware :: Nvidia 19.29-22.1 Suse 11.3 Dual Monitor Mouse Flickers When Moved To 2nd Monitor?

Jan 15, 2011

just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010

[code].....

View 9 Replies View Related

General :: Screen Rate - Refresh Mode Of The Monitor In The Monitor Options Have Only One Option 60Hz

Mar 20, 2010

I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.

View 1 Replies View Related

Ubuntu :: Microphone Monitor Like Camera Monitor?

Sep 25, 2010

I have the 'Camera Monitor' installed, which works fine and notifies me if my webcam becomes activated.Is there a similar desktop program to monitor the microphone, that can notify me if the microphone becomes active?

View 2 Replies View Related

Debian Hardware :: External Monitor As The Main Monitor For A Laptop

Sep 22, 2010

I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.

My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).

I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.

View 2 Replies View Related

Fedora :: F14 Dual Monitor - Firefox Starts On Wrong Monitor

Jan 27, 2011

I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor

When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.

About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.

View 5 Replies View Related

OpenSUSE Hardware :: Both Monitor Displays Coming Through On Single Monitor?

Jan 21, 2011

I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.

View 4 Replies View Related

Ubuntu :: Install "swapmonitor-1.1.tar.bz2" To Move Windows From Monitor To Monitor In A Dual Desktop Environment?

May 3, 2010

I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved