Ubuntu Networking :: 10.10 - No Wireless / Wired Connection On Dell Vostro 1500
Apr 6, 2011
I've been running Ubuntu 10.10 on my Dell Vostro 1500 for awhile, one morning I tried to get online & no networks would show up. I tried plugging in my ethernet cable & still nothing. Just the two lights by the plug stay lit up. If I boot into Puppy Linux the wireless works just fine. I was using the B43 driver before I had problems, then when I was trying to get it to work I accidentally deleted the driver. I cannot figure out how to get my internet working again in Ubuntu. I don't want to be stuck using Puppy Linux forever! I don't really know many commands, normally just search online how to fix problems, but it's pretty hard to do when I have to boot back & forth between operating systems to find things to try.
View 9 Replies
ADVERTISEMENT
Mar 31, 2011
I just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update
apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
View 4 Replies
View Related
Nov 21, 2010
I have installed openSuse 11.3, my computer is a Dell Vostro 1500, it has a modem, but is not recognized between the devices. I do not know why. I have not the slightest.Please, someone with enough intelligence to be humble to explain clearly and explicitly that the system can I identify and mount my modem, and can make use of it.If by chance you need some additional information, please specify to me how I can get to the place in this thread.
View 4 Replies
View Related
Feb 21, 2010
Just upgraded from Intrepid to karmic on my girlfriends Dell Vostro 1510 and the wireless stopped working. The drivers are installed and worked fine under intrepid. When I enter the hardware drivers utility it says that the driver is active but currently not being used.
iwconfif output:
Code:
lo no wireless extensions.
eth0 no wireless extensions.[code].....
View 3 Replies
View Related
May 20, 2010
That's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
View 2 Replies
View Related
Aug 5, 2011
I have Dell Inspiron 1545. It works fine on wired but fails on wireless.
I am using wicd as an interface.
It always comes up with the following error: Connection Failed: Bad password.
I have checked the passwords in both wicd and the router.
They seem to be the same. Am I missing something ?
View 5 Replies
View Related
Aug 22, 2010
I have an issue relating my broadband connection, which I am not able to solve. I hope and wish, that I would find some way out here.
Some introduction: I am using Dell Inspiron (i3 processor) laptop, which I recently bought. I have win 7 preinstalled in it. In win 7, the wired broadban connection (Airtel connection) is working fine and have no issues.
I have been using mobile GPRS(BSNL, Ltd) through bluetooth, and that have been working fine. But today when I tried to connect through landline connection, it didn't workout. But the bluetooth connection is still fine. When I tried to do the connection manually through Network Manager, it is not taking the MAC Address. Till now, after installation, I have not updated my OS.
I surfed the net and tried some commands, whose results I am posting below.
From a post I found out, that I should change my duplex settings (from 100 full to 10 full), but I could not get much. The corresponding commands and output,
I have posted below:
View 2 Replies
View Related
Jan 26, 2010
Just installed opensuse 11.2 wifi networks not detected
View 9 Replies
View Related
Jul 27, 2011
I just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
View 9 Replies
View Related
Jun 9, 2010
I have no wired or wireless internet after installing 10.04 on a dell e1505 laptop.
View 2 Replies
View Related
May 6, 2011
So I had 11.04 beta and after the official release I updated,rebooted and lost all wifi and wired connectivity.
On an Inspiron 9300
lshw -C network gives
*-network:0 UNCLAIMED
For my Broadcom BCM4401-B0 100Base-TX and *-network:1 DISABLED For my wirless interface Intel PRO/Wireless 2200BG
View 1 Replies
View Related
Mar 31, 2010
I just installed 9.10 on a brand new Dell Vostro 1520. The WLAN card does NOT work out of the box.
Here is what you have to do.
After install and rebooting insert the live CD
Go to software sources (system > software sources)and check the "officially supported restricted copyright" box
You are then asked to update the available software list, do so.
You will receive an error message since you are not (yet) connected to the internet and all the other repositories are not available.
Now you should be notified that restricted drivers are available, if not you can go to system > hardware. Anyway, now you should be able to activate the Broadcom STA driver. After rebooting you can connect to available wireless networks.
Alternative (in case you are not asked, which happened to me on another Vostro system) system>administration>syaptic package manager
Search for broadcom
Mark b43-fwcutter and bcmwl-kernel-sources for installation
Reboot (who said there is no rebooting required in linux)
The adapter should be up and running ...
View 4 Replies
View Related
Jan 18, 2010
I recently purchased an Acer Aspire 1410 notebook running Windows 7 home edition. I installed Ubuntu 2.3 and my wireless and network LAN connection is not working. I saw on a link in this forum, someone was having similar problem. However, when i tried the solution that was recommended/suggested to the person, it did not work for me.
what I can do to get my wireless and wired connection to work?
View 9 Replies
View Related
Sep 18, 2010
I have an old Compaq Presario v2000 that recently had Ubuntu 10.04 installed on it. The wired internet worked when it was installed, but the wireless didn't. I tried to download the drivers for it and it failed everytime. I did an update thinking that the update might fix the wireless, but it didn't, it actually made my wired connection stop working. So now I have a newly installed OS on the laptop, and I can't do anything on it because there is no way to get any internet.
View 1 Replies
View Related
Jan 26, 2011
I have a wired connection. I want to to distribute it through my wireless card so that other people around can use it. How?
View 2 Replies
View Related
May 9, 2010
I've already got the b43-fwcutter package and a driver called 'b43' appears in System > Administration > Hardware Drivers but it does not seem to enable. Another, Broadcom STA wireless driver, does enable, but I'm not picking up the wireless signal.
Code:
$lspci 05:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Code:
$ sudo lshw -C network
SCSI
[Code]...
View 5 Replies
View Related
Aug 7, 2010
Have an odd problem on a Dell Latitude 13 w/ a Intel WiFi 5100 card. The wifi antenna is disabled on startup into Ubuntu 10.04/64-bit. There's no hardware enable/disable that I can find.I have tried "sudo ifconfig wlan0 up" to enable it, the light for the wifi antenna comes on, but still no luck.I know the wifi works in Ubuntu, because if i load windows first, then reset into Ubuntu, once in a while it works just fine.
View 2 Replies
View Related
Jan 14, 2010
I have a laptop Acer aspire 5100. I installed Ubuntu a while ago and it was working well. Last week I updated it using Update manager and ever since I haven't been able to connect either wireless or wired connection.
I get this:
Code:
The wireless card seems to have disappeared.
I reinstalled Ubuntu and the problem persists.
View 2 Replies
View Related
Apr 19, 2010
Why is wireless taking priority from the wired connection? I should not have to disable wireless just to have the wired connection connect.
View 1 Replies
View Related
May 5, 2010
I decided to do a fresh install of 10.04LTS on a Dell Latitude D600 Laptopne wordDisaster I have no wireless or WIRED internet connection. After viewing another post I've provided the output of "sudo lshw -C network" command below (I've blocked out my MAC address on purpose). It appears that the lan card is not even being recognized. The card is enabled in bios (I've checked twice). I don't get it, the wireless worked fine before I did a fresh install of 10.04LTS. I can't use wireless because I have the b43 driver firmware issue that I can't resolve unless I get my wired connection working.
*-network
description: Network controller
product: BCM4309 802.11a/b/g
[code]...
View 9 Replies
View Related
Aug 29, 2010
For the last 3 or so hours I have been trying in vain to simply give my mobile phone wifi internet access from my netbook. I have tried to google and follow some howto's and guides, but they're either too old or don't explain it very well. I'm fairly new to use of Linux and of wireless networks, but can handle setting them up in Windows. So basically, having said that, I believe I mostly understand how this whole thing is supposed to work theoretically but I just feel as though I lack the experience to jump the wireless hurdle AND the Linux hurdle at the same time. I have provided some information below.
- Setup is based on Lucid netbook remix install with a Maverick kernel update due to lack of driver support for wireless NIC - I can confirm wireless does work properly for connection purposes
- I followed [URL] and kind of followed [URL however I couldn't even tell how to run Network Manager, even though Synaptic tells me it is installed
- When I ran into problems trying to install ipmasq I found [URL] and followed what the response told me to which allowed me to restart the dnsmasq and the dhcp3-server at least
- I have restarted the entire netbook several times throughout the process.
View 8 Replies
View Related
Nov 9, 2010
I'm using Archlinux with NetworkManager to connect to the internet. When I'm in my room, I've an ethernet cable and still receive the wireless signal.Sometimes (like when we have a power cut, somebody is rebooting the router or simply something wrong with the provider), I'm disconnected during a few seconds, NetworkManager ask me again the password of the wireless (even if it remembers it), and then I'm ok.But when I'm not in front of my computer, while I haven't push the button "ok", it doesn't connect, even with the wired connection.That's not very normal in my opinion as there is supposed to have two different and independent connection. No ?
I intent to install an ssh server on my computer but if I cannot access it every time there is a problem that won't be very useful.
View 1 Replies
View Related
Jan 14, 2010
As of now, my internet works fine when connected with an ethernet cable.The problem is it doesnt seem like my wireless is working at all.The led light is orange, (its usually blue when it connects) and I cannot see my home dsl network.Is thereany specific troubleshooting steps I should take?HP dv6000 laptopwireless card: Broadcom Corporation BCM4311 802.11b/g WLAN
View 6 Replies
View Related
Feb 25, 2010
I'm trying to set up a wireless or wired network (wireless would be better...) to share my connection with my housemate, as well as with some devices. The only guide I found regarding this (I must admit, I didn't have much time to put into research), was dating back to 2005, and although doable, seemed somewhat confusing. Getting to the point: is there a way (maybe a standalone program, or some kind of plugin) to share a connection?
View 9 Replies
View Related
Sep 7, 2010
I had windows and 8.10 earlier and now have single boot 10.04 !
1.) I can see wireless networks only after I am connected to the router through wired ! I guess its some thing to do with me activating ifup and ifdown, when my wired connection stopped working as i was trying to install wireless drivers.
2.) Even when I see wireless networks, i cannot connect to any of them.
I tried various things for a whole day trying to fix it and i doubt if i screwed up some thing that was running good.
View 6 Replies
View Related
Jan 22, 2011
share wireless PC connection to xbox 360 via wired eithernet(10.10)?
View 1 Replies
View Related
Mar 29, 2011
Machine brand: Acer 5253-BZ893 laptop
Ethernet controller: Atheros communication device 1083
Network controller: Broadcom Corp. Device 4357
iwconfig: no wireless extensions
network config: *-network UNCLAIMED
iwlist scan: Interface doesn't support scanning
Ubuntu release: 10.04.2
uname -mr: 2.6.32-28-generic x86_64
I have not been able to get an internet connection wired or wireless on my laptop. I downloaded the drivers from Acer's website and tried installing them using ndiswrapper. Still no luck.
View 3 Replies
View Related
May 30, 2011
I'm fairly sure that this is an Ubuntu issue, as I've tried this on my windows computer with success.I'm running a minecraft server on my laptop, previously over a wireless connection but the data rates were too slow. On a wired connection, however, the server starts up and runs like normal but the port is not open when accessing from the network's public IP. I tested this with canyouseeme(.)org. I can get to it from other computers within the network by using a local IP, which to me seems a little strange as it seems to indicate that the port is open on the PC but somewhere in the router it gets confused due to being wired(?). Obviously I've forwarded the ports on the router (BTHomehub 2.0) with both TCP and UCP (it worked over wireless!). Any suggestions as to what might be causing this? I'm stumped.
View 5 Replies
View Related
Jul 20, 2011
Just had an issue crop up where connecting wired network seems to stop wireless connections from getting an IP (happens on multiple networks both while the cable is plugged in and once it's been unplugged; also persists across reboots). Machine is a Dell Latitude 2120n with UnionFS running. Connection was working fine prior to the wired connection
View 3 Replies
View Related
Feb 17, 2009
I've installed F10 on my laptop since few days and I'm facing an annoying networking issue: the network connection seems to work well when, suddently, it goes down for a while, and then come back.This happens with both wired and wireless (Intel PRO/ Wireless 3945ABG) connection.
View 6 Replies
View Related
