Ubuntu :: Fresh Install, Choosing Windows 7 Under GRUB Just Restarts System?
May 6, 2011
I just installed the newest version of Xubuntu using the LiveCD, I chose to install it alongside my current installation of Windows 7, everything went well it seemed, but now when I choose Windows 7 under the GRUB menu it just restarts my system and then takes me back to the grub menu, Xubuntu works fine though and boots fine, I tried sudo update-grub, didn't fix it.Heres the boot info from a script I found, but being rather poor when it comes to diagnosing Linux, I figured it'd be best to post this and see
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 2 Replies
ADVERTISEMENT
Dec 14, 2010
I recently installed grub and windows side by side and now whenever I select windows from the grub menu it just loads grub again. I installed burg a while ago but i don't think i installed it right. I didn't check windows before then so it might not be the problem either.
View 7 Replies
View Related
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Jan 20, 2009
I updated a RHEL 4 system today using up2date and when the system rebooted it just said "GRUB" on the screen for a few seconds and then restarted (and did this over and over and over).
I booted from a rescue CD and was going to reinstall grub.
Here's the kicker: this machine has two hard drives configured with software RAID 1, and I don't want to screw up the mirroring by tinkering with grub.
/etc/fstab shows that /boot is at /dev/md0 but "/sbin/grub-install /dev/md0" doesn't work ("/dev/md0 does not have any corresponding BIOS drive").
I have a bad feeling that if I do "/sbin/grub-install /dev/hda1" that I'm going to screw up my mirroring.
View 2 Replies
View Related
Jun 17, 2010
this forum and also to OpenSuse. Wn i shutdown my sys, it restarts rather than shutting down. Please help me out.
View 2 Replies
View Related
Jun 8, 2010
I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.
As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.
View 9 Replies
View Related
Apr 22, 2011
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
View 9 Replies
View Related
Jun 18, 2011
I'm trying to install FC15 x64, the install goes smooth and reports no errors, I looked around in /tmp/anaconda.log but couldn't see any relevant errors either, basically after rebooting and trying to boot my new install, I get:
error: file not found
Entering recue mode...
grub rescue> _
I've reinstalled 3 times now, first I was using USB, but now have tried with CD too. All I want is for GRUB to be installed on /dev/sda2 which is where my install is, and which is also the default location where the installer supposedly installs it to. I've also tried unplugging my other hard disks, and installing with just the first drive.
View 14 Replies
View Related
Jan 27, 2010
I have an odd problem. I custom-built a workstation:
MSI Speedster 1 mobo
2x Opteron 2352
4x DDR2 ECC 4GB
3x 150GB WD Raptor, hardware RAID 0
1x 2TB WD Green, standalone
I had Linux Mint 8 installed, but before putting the machine to real use decided to toss Windows 7 on there to see how it worked. Now I am attempting to put Mint 8 back on to get everything set up. There have been no hardware changes since I had Mint installed before.
I can successfully install, but when I reboot I get a Grub error 17. The partition table looks like:
50GB / ext4
400GB /home ext4
...
2TB /backup /ext3
Grub is installed to (hd0), which is the 450GB hardware RAID. It does not make a difference when I run the installation (and then reboot) with the 2TB drive disconnected. Thinking maybe the new ext4 format was messing with Grub, I tried:
200MB /boot ext2
50GB / ext4
400GB /home ext4
And installed again and rebooted. No dice. I'd guess Grub has issues recognizing the hardware raid, except it worked before
View 1 Replies
View Related
Jan 27, 2010
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code:
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
[Code]....
View 5 Replies
View Related
Jun 22, 2010
I did a fresh install of Lucid Lynx, and now when I start up it shows a blinking cursor for a second or so and then my monitor shows an "Input signal out of range" error. The same thing has happened before, and I was able to fix it by editing the boot options in grub to include 'nomodeset'. However, this time the usual grub loading screen where I would normally press esc to edit the boot options doesn't appear. (Spamming esc doesn't seem to work either.) If it matters (which I have an odd feeling that it does) I partitioned the hard drive into an ext4 partition that mounts at / , a swap partition, and another ext4 partition that mounts at /home . I attached a screenshot of what GParted says about it.
View 2 Replies
View Related
May 22, 2011
My setup: a work laptop that has a corporate Win7 image, and to which I have added a few partitions to try various linux distributions. The MBR is governed by Lilo from the Slackware 13.37 installation in /dev/sda5. The MBR boots no kernel image directly, it only chainloads the boot sectors of partitions /dev/sda1, /dev/sda5, /dev/sda6 and /dev/sda7. The latter three are formatted ext4.The Win7 boot mechanism traditionally resides in /dev/sda1, and the linux distros are required to install their boot machines into their respective partitions.
What I am trying to say is, I installed Ubuntu 11.04 into /dev/sda7, and told the grub installer the same thing: install yourself into the boot sector of /dev/sda7. Kudos btw for the Ubuntu installer, it comes across as a very professional piece of software.
View 9 Replies
View Related
Jan 2, 2011
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
View 11 Replies
View Related
Apr 21, 2010
Bit new to linux but what i saw with gloria in my opinion was a better os than windows. Just done a fresh install with helena on my sata drive and a dual boot with xp pro which is on my on my ide drive my problem is on boot I get to grub loading then boot hangs for 5 minutes before the dual boot screen appears and when it does I can not move up or down to select any options eventually however helena does start.
View 7 Replies
View Related
Mar 12, 2010
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
View 1 Replies
View Related
May 3, 2011
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code:
set root=(md1)
linux /vmlinuz root=/dev/md1 ro
initrd /initrd.img
boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
[Code]...
View 9 Replies
View Related
Jun 3, 2011
Company laptop HP Compaq 6710b, NTFS on hd0, Win7 installed. BIOS allows boot from USB drive, so wanted to use Ubuntu with no influence on laptop (no disconnecting internal drive, no dual boot, etc). Performed an install from CD to an USB drive making a JFS partition mounted on / and a swap partition. The installer made the JFS partition bootable (boot flag is set) as I asked. On first boot I got:
error: hd0 out of disk.
grub rescue>
View 14 Replies
View Related
Mar 15, 2011
After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
View 8 Replies
View Related
Jul 26, 2014
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect
/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /
/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
View 3 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
May 14, 2011
I just installed 5.6 using the x86_64 netinstall - all appeared to go well, albeit a little slowly. At the end of the install i rebooted the machine but CentOS won't load. If I select the CentOS option from grub (only other option is 'other') the machine instantly reboots.
Only options selected for install where 'server' and 'server gui'.
Editing the CentOS options shows the following but I've no idea whether this is correct or not (assume it is):
root (hd1,0)
kernel /vmlinuz-2.6.18-238.e15 ro root=/dev/VolGroup00/LogVol00 rhgb initrd /initrd-2.6.18-238.e15.img
View 8 Replies
View Related
Jun 9, 2010
I have installed 10.04 from scratch (fresh install) and I am unable to change the default option of grub using the keyboard. while booting
View 7 Replies
View Related
Jan 13, 2010
I have had a new install of Karmic from CD and have done all updates and added a few applications like VLC and a few others. I have several different media players, Totem, VLC, Xine, and gxine. I started out thinking Totem might be enough, but added VLC as it can handle just about anything, and then the other just to see of any thing happened.
I have installed all restricted and unrestricted packages from the Medibuntu depositories I can find. Still my laptop will not read any kind of DVD. I am region 2, but have tried both bought region 1 and region 2 DVDs. I had this problem last time I installed Ubuntu, but after installations of a few applications and messing about it suddenly worked. I really didn't know why or what suddenly was working.
View 9 Replies
View Related
Jul 11, 2011
My laptop restarts itself frequently - full restart back through the bios screen to the bootloader, not just logging-out. It happens in Ubuntu 11.04 (32 bit and 64 bit), the Gnome 3 live CD from [URL] (the Fedora based one, run from a USB stick) and even from the GRUB bootloader menu. I have tried two different harddrives and two sets of RAM (all combinations) and the restarts still occur. They even happen when the hard drive is removed and Ubuntu 11.04 is booted from USB. Windows XP Media Center is also installed on the laptop too but the restarts have never happened when in Windows (even though they can happen in the bootloader!).
The memtest86 GRUB menu entry loads the blue screen with the title and memory info etc. but it seems to stop there and I don't think it's actually doing any tests, so I haven't been able to do a memory test. In Windows I have not installed any wireless network or 4-in-1 card reader drivers (among others probably), which is a possible reason why it does not restart in Windows, although I don't think GRUB has drivers for either of these devices either. My laptop is an Acer Aspire 5630 with the following hardware:
CPU: Intel Core 2 5500 (1.66Ghz)
Memory: 2GiB DDR2
Graphics: Intel 945 (integrated)
Audio: Intel HD audio with Realtek codec
Wireless: Intel PRO/Wireless 3945ABG [Golan]
It does seem that sometimes the restarts are caused by touching the keyboard (i.e. they happen exactly when I hit a key) but they also sometimes occur when I am not even touching the computer at all.
View 9 Replies
View Related
Jan 25, 2010
how to do a fresh install of Ubuntu and Windows on two separate partitions? When I install windows and leave a partition for linux, the "Side by side" setup isn't what I'm looking for. Manually doing it made me a little uneasy.
View 5 Replies
View Related
Jul 8, 2010
I recently decided to venture into the world of Linux/GNU by installing Ubuntu.
Before installing, I had a 190gb partition for windows 7 and 45gb of unallocated space. Through Wubi, I used the advanced partition editor to make a 6gb swap partition and a 22gb root partition for Ubuntu. All went well, but when I rebooted, I was unable to choose linux.
I installed Ubuntu by using Unetbootin to put the Ubuntu ISO on my USB drive. After installing, I disconnected the USB drive, and I was unable to choose the linux kernel option on the GRUB menu. When I do, my system just restarts and presents me with the GRUB menu again. However, windows 7 boots up perfectly.
I'm assuming that GRUB is somehow trying to boot the linux kernel from the USB. How do I change it to boot from the installation I made on my harddrive?
View 9 Replies
View Related
Oct 14, 2010
I'm trying to install 10.10 64bit on a DFI X48 mainboard with 8Gb RAM, I've tried installing from the Desktop CD, Alternate CD and USB stick, but all attempts fail with
uncompression error
-- System halted
I've run memtest86 and the RAM passes OK, I've even tried running the install with just 4Gb RAM but without any luck. I've even tried three different CD/DVD drives.10.04 64bit runs from the Live CD without any problems, but 10.10 isn't playing ball...
View 1 Replies
View Related
May 4, 2010
I installed Lucid Lynx some days ago. Whenever I try to access Vista from GRUB, the computer restarts. I haven't changed anything about how the computer starts.
View 4 Replies
View Related
Feb 16, 2011
I am having a re-occuring problem with Grub. The problem seems to occur about once every 15 or so times that I start up. Basically, it gets past the Samsung branded screen but before it goes to the Grub screen, the computer will restart - it just continually gets to this point and restarts until I shut down with the power button. The problem is easily fixed by re-installing Grub using an ubuntu CD. Things will then run fine for about a week and the same problem will occur.
View 1 Replies
View Related
Mar 1, 2010
After a fresh install of Debian I came across an error Im hoping you guys can help me with. Ive searched for the error and it appears there are multiple reasons that could be causing it. To compound the problem, Im at work so I dont have the specific error messages....so I just installed Lenny (standard install, no desktop) using a USB installer and everything went very smooth. On first boot, the system paused while waiting for the root file system. After a minute or two it just errored out complaining it could not find the root file system and put me at a (vmlinuz) prompt?My guess is that I need to go into my bios and change my boot priority.. but again, thats just a guess.
View 1 Replies
View Related
