Installation :: Grub Hanging After Fresh Install Mint Helena?
Apr 21, 2010
Bit new to linux but what i saw with gloria in my opinion was a better os than windows. Just done a fresh install with helena on my sata drive and a dual boot with xp pro which is on my on my ide drive my problem is on boot I get to grub loading then boot hangs for 5 minutes before the dual boot screen appears and when it does I can not move up or down to select any options eventually however helena does start.
View 7 Replies
ADVERTISEMENT
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Jan 12, 2011
I'm using Linux Mint Helena and my software sources seems outdated. I keep getting the error:
Code:
Could not download all repository indexes The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
[Code]...
Can I link to repositories which my system is not configured to, for example, could I include all the latest Debian, Ubuntu and Linux Mint 10 respositories (even though Iḿ using Linux Mint 8?
View 9 Replies
View Related
Mar 31, 2010
I'd like to know how to uninstall software from Linux Mint 8 Helena. WinXP has the Add/Remove programs. What about Linux?
View 1 Replies
View Related
May 10, 2010
I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please
[Code]...
View 8 Replies
View Related
Sep 21, 2010
I did was install MInt 9 on it. Everything is going well except no sound at all. Not even the 'start up chime' of any music/videos. I have the volume buttons working on the laptop and I have checked sound preferences and nothing is muted. I did not dig much further as I have learned with mint and ubuntu that can create problems. This is a fresh install and no sound from the get go. How should I proceed to trouble shoot?
[code]....
View 2 Replies
View Related
Jun 8, 2010
I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.
As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.
View 9 Replies
View Related
Jan 27, 2010
I have an odd problem. I custom-built a workstation:
MSI Speedster 1 mobo
2x Opteron 2352
4x DDR2 ECC 4GB
3x 150GB WD Raptor, hardware RAID 0
1x 2TB WD Green, standalone
I had Linux Mint 8 installed, but before putting the machine to real use decided to toss Windows 7 on there to see how it worked. Now I am attempting to put Mint 8 back on to get everything set up. There have been no hardware changes since I had Mint installed before.
I can successfully install, but when I reboot I get a Grub error 17. The partition table looks like:
50GB / ext4
400GB /home ext4
...
2TB /backup /ext3
Grub is installed to (hd0), which is the 450GB hardware RAID. It does not make a difference when I run the installation (and then reboot) with the 2TB drive disconnected. Thinking maybe the new ext4 format was messing with Grub, I tried:
200MB /boot ext2
50GB / ext4
400GB /home ext4
And installed again and rebooted. No dice. I'd guess Grub has issues recognizing the hardware raid, except it worked before
View 1 Replies
View Related
Jan 27, 2010
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code:
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
[Code]....
View 5 Replies
View Related
Jun 22, 2010
I did a fresh install of Lucid Lynx, and now when I start up it shows a blinking cursor for a second or so and then my monitor shows an "Input signal out of range" error. The same thing has happened before, and I was able to fix it by editing the boot options in grub to include 'nomodeset'. However, this time the usual grub loading screen where I would normally press esc to edit the boot options doesn't appear. (Spamming esc doesn't seem to work either.) If it matters (which I have an odd feeling that it does) I partitioned the hard drive into an ext4 partition that mounts at / , a swap partition, and another ext4 partition that mounts at /home . I attached a screenshot of what GParted says about it.
View 2 Replies
View Related
May 22, 2011
My setup: a work laptop that has a corporate Win7 image, and to which I have added a few partitions to try various linux distributions. The MBR is governed by Lilo from the Slackware 13.37 installation in /dev/sda5. The MBR boots no kernel image directly, it only chainloads the boot sectors of partitions /dev/sda1, /dev/sda5, /dev/sda6 and /dev/sda7. The latter three are formatted ext4.The Win7 boot mechanism traditionally resides in /dev/sda1, and the linux distros are required to install their boot machines into their respective partitions.
What I am trying to say is, I installed Ubuntu 11.04 into /dev/sda7, and told the grub installer the same thing: install yourself into the boot sector of /dev/sda7. Kudos btw for the Ubuntu installer, it comes across as a very professional piece of software.
View 9 Replies
View Related
Jul 26, 2014
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect
/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /
/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
View 3 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Mar 12, 2010
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
View 1 Replies
View Related
May 3, 2011
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code:
set root=(md1)
linux /vmlinuz root=/dev/md1 ro
initrd /initrd.img
boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
[Code]...
View 9 Replies
View Related
Apr 3, 2010
just installed OpenSUSE this weekend and I already had two different OSs on the laptop. Windows 7 and Linux Mint 8 KDE CE. Well during installation Windows was automatically added to grub but Mint wasnt. And When I go to the bootloader tab, and I add a new image it asks me the kernel image and initial RAM disk. Well This is what is in the boot folder on the Mint Partition
{
boot (folder only contains a jpg file)
grub (the grub installed on KDE... inactive)
abi-2.6.31-16-generic
[Code].....
View 5 Replies
View Related
Mar 17, 2011
When I installed 64 bit OpenSUSE Gnome 11.4 today on an ext4 primary partition (sda4) from the Install DVD, it eliminated LinuxMint 9's entry from OpenSUSE'sGrub The 64 bit LinuxMint v. 9 (Isadora) is installed on an ext4 logical partition (sda9) inside an extended partition, but it doesn't appear in OpenSUSE's Grub (and now OpenSUSE 11.4 won't connect to the Internet - although the Live CD ran yesterday without a hitch).
I'm hoping that my fellow OpenSUSE users can help me regain access to my Isadora installation and hopefully, point me to a solution for the Internet access problem.
View 9 Replies
View Related
Apr 10, 2011
After installing opensuse grub disappeared from the Linux Mint I want to boot into Linux Mint.
View 2 Replies
View Related
Jun 18, 2011
I'm trying to install FC15 x64, the install goes smooth and reports no errors, I looked around in /tmp/anaconda.log but couldn't see any relevant errors either, basically after rebooting and trying to boot my new install, I get:
error: file not found
Entering recue mode...
grub rescue> _
I've reinstalled 3 times now, first I was using USB, but now have tried with CD too. All I want is for GRUB to be installed on /dev/sda2 which is where my install is, and which is also the default location where the installer supposedly installs it to. I've also tried unplugging my other hard disks, and installing with just the first drive.
View 14 Replies
View Related
Jan 2, 2011
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
View 11 Replies
View Related
May 6, 2011
I just installed the newest version of Xubuntu using the LiveCD, I chose to install it alongside my current installation of Windows 7, everything went well it seemed, but now when I choose Windows 7 under the GRUB menu it just restarts my system and then takes me back to the grub menu, Xubuntu works fine though and boots fine, I tried sudo update-grub, didn't fix it.Heres the boot info from a script I found, but being rather poor when it comes to diagnosing Linux, I figured it'd be best to post this and see
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 2 Replies
View Related
May 14, 2011
I just installed 5.6 using the x86_64 netinstall - all appeared to go well, albeit a little slowly. At the end of the install i rebooted the machine but CentOS won't load. If I select the CentOS option from grub (only other option is 'other') the machine instantly reboots.
Only options selected for install where 'server' and 'server gui'.
Editing the CentOS options shows the following but I've no idea whether this is correct or not (assume it is):
root (hd1,0)
kernel /vmlinuz-2.6.18-238.e15 ro root=/dev/VolGroup00/LogVol00 rhgb initrd /initrd-2.6.18-238.e15.img
View 8 Replies
View Related
Jan 16, 2011
I'm getting a tad frustrated. Having gone down a dead end on this thread: [URL] I reloaded 10.10, wiping out previous install. Everything was working as it should. I then updated (today, Sept 16, 2011) When rebooted, the system went right to a grub prompt.
View 9 Replies
View Related
Jun 3, 2011
Company laptop HP Compaq 6710b, NTFS on hd0, Win7 installed. BIOS allows boot from USB drive, so wanted to use Ubuntu with no influence on laptop (no disconnecting internal drive, no dual boot, etc). Performed an install from CD to an USB drive making a JFS partition mounted on / and a swap partition. The installer made the JFS partition bootable (boot flag is set) as I asked. On first boot I got:
error: hd0 out of disk.
grub rescue>
View 14 Replies
View Related
Jun 9, 2010
I have installed 10.04 from scratch (fresh install) and I am unable to change the default option of grub using the keyboard. while booting
View 7 Replies
View Related
Nov 3, 2010
I had dual boot Win Xp and CentOs Linux. I have small harddisk and needed more space, so I removed CentOS linux with partition manager and rebooted. Now I can not boot my XP. All I can see is GRUB prompt. Keyboard do not respond except CTRL ALT DEL. I know I have to fixmbr. But I can not boot from my bootable XP CD. I can boot from CentOS linux DVD and enter into linux rescue mode. From that I typed "grub" entered into grub. Then I tried
root(hd0,0)
makeactive
chainloader --force +1
boot.
But it gives me some error. Can I boot my XP from CentOS DVD rescue mode?
View 4 Replies
View Related
Aug 11, 2010
I want to install Mint 9 KDE but I need to specify some installation parameters. I need to set the default filesystem as EXT3 so I can create a disk image with Acronis True Image that doesn't support EXT4 yet.
I've done the same with Ubuntu Server 10.04 by including the parameter 'partman/default_filesystem=ext3' at the installation console. I know Mint 9 Gnome can also be installed direct from the CD, but the KDE Live DVD doesn't give me any such option - just the desktop installer.
How do I customise the installation of Mint 9 KDE?
View 2 Replies
View Related
Jun 3, 2010
I have some pending upgrades, one of which includes kernel 2.6.32-22 but whenever the upgrade gets to running the update-grub command, it gets stuck on "Found memtest86+..." Here's the actual output...
[Code].....
It's been hanging like this for hours today, preventing me from getting any of the pending upgrades. I've cancelled it several times, deleted the dpkg lock files and tried it again only to have it hang all over again.
View 9 Replies
View Related
Feb 26, 2010
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies
View Related
Mar 27, 2010
I'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
View 4 Replies
View Related
