I recently installed grub and windows side by side and now whenever I select windows from the grub menu it just loads grub again. I installed burg a while ago but i don't think i installed it right. I didn't check windows before then so it might not be the problem either.
View 7 RepliesI just installed the newest version of Xubuntu using the LiveCD, I chose to install it alongside my current installation of Windows 7, everything went well it seemed, but now when I choose Windows 7 under the GRUB menu it just restarts my system and then takes me back to the grub menu, Xubuntu works fine though and boots fine, I tried sudo update-grub, didn't fix it.Heres the boot info from a script I found, but being rather poor when it comes to diagnosing Linux, I figured it'd be best to post this and see
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I recently decided to venture into the world of Linux/GNU by installing Ubuntu.
Before installing, I had a 190gb partition for windows 7 and 45gb of unallocated space. Through Wubi, I used the advanced partition editor to make a 6gb swap partition and a 22gb root partition for Ubuntu. All went well, but when I rebooted, I was unable to choose linux.
I installed Ubuntu by using Unetbootin to put the Ubuntu ISO on my USB drive. After installing, I disconnected the USB drive, and I was unable to choose the linux kernel option on the GRUB menu. When I do, my system just restarts and presents me with the GRUB menu again. However, windows 7 boots up perfectly.
I'm assuming that GRUB is somehow trying to boot the linux kernel from the USB. How do I change it to boot from the installation I made on my harddrive?
I have a dell Inspiron 5150. I had perfect windows XP home installation, and decided to dual boot with Ubunutu 10.04. I copied the whole C:/ to external drive, installed ubuntu, installed windows, repaired Grub2, but now, Grub2 looks something like this.
[Code]...
Could i install ubuntu and whenever i boot my pc up, is it possible to boot up automatically into windows without any OS choosing screen appearing; and instead only boot into ubuntu when i have the livecd in my drive and boot from it?Im the only one who knows about Ubuntu in my family and most would be quite confused if they didnt find thereselves booting into windows as they normally would. So to get around this and to have Ubuntu at the same time, i want to only be able to access ubuntu by putting in the live cd and booting it from that. Or is it possible for information that i download etc. to be stored onto the livecd itself?
View 9 Replies View RelatedWhen I boot one of my machines, it gets as far as GRUB, then proceeds to a blank screen for a second, and then repeats the cycle all over again - ad infinitum. I have tried previous kernels on the list with the same results Also, I cant boot into recovery mode either.
I have run Memtest successfully from the GRUB options and no errors appear in the results. I have tried booting from a Live CD and here I get as far as the "OS choosing screen". When I then select one and hit Enter, the screen goes blank and the machine reboots as before.
Here is my code
Code:
I just cant seem to understand loops. i havent put the loop in yet but what i would like is the user only to have 3 tries at guessing number then exit if wrong or it says "correct if right" tbh i dont even know if the above code is correct. i have tried several ways and position of the loops but each time is comes out wrong
I have a mytext file with month and year as two separate fields. likemytext fil
08 2010
09 2010
10 2010
........
........
........
I want to read the values of each field i.e., month and year into an awk script.
I have just started a job as an IT tech, and have inherited a linux server running CEntOS 5.3 -- I have some experiance with linux, but am a little at sea. I'm using Webmin 1.490.The main use of the server is to samba share file space to windows clients, running XP.Everyone can happily connect to their home share, however the other shares have problems. One of the shares "staff" fails intermittently (to some staff members) and some of the other shares fail always.
The failure is that when a user tries to connect to the share, it pops up a username and password dialog (even if they just successfully viewed their home dir) then on entering correct details and clicking ok, the box refreshes with <domain><user name> (where braced values are replaced by literal values). If a user is connecting from outside via vpn (hosted though a different department's server) the domain is replaced by their computer name.If the password is re-entered, the same happens, in an infinite loop, and no access is ever given.When I say the staff share is intermittent, there likely is some pattern, but I haven't been able to work it out yet -- I think it may have something to do with how recently the account was set up, or physical location.
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies View RelatedI have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order:
sda1: Windows 7 (can't boot into)
sda8: ubuntu (gets erased)
sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
When i turn on my laptop the dell logo comes up, and then it goes to the Windows black "grub" (i have ubuntu and 7), if i click on "Windows 7" it starts, but if i click on "Ubuntu 11.04" it goes to the nice and purple grub that we all know, and i also have two options: Ubuntu or windows. It seems stupid and pointless to have 2 grubs.Is there any way to uninstall Window's black grub so the computer will go direct to Ubuntu's purple grub?
View 9 Replies View RelatedIn the past (before UpStart was used in Ubuntu) I was able to configure multiple boot items in Grub menu to load the same kernel but into different runlevels. I had configured runlevel 3 (I went into /etc/rc3.d/ and removed the symlink to /etc/init.d/gdm) to be w/o GDM, so that if I had chosen it, my box would not boot into X. How can I achieve the same effect in Lucid?
View 2 Replies View RelatedI've used Ubuntu just a couple of times, and I've Never performed the Installation. I've been a Windows user mostly.But I'm ready for a change. I would like to Install Linux on my Desktop & Netbook Computer.Problem is, how to go about it.On the Desktop, I'm not the only person using it, and while I'm all & ready to try Ubuntu (Specially since XP Broke 3 days ago and the Format is impending) The rest of the people using the PC aren't. On the Netbook, right now I can't since I'm working on something, and I'm worried about compatibility issues between Platforms.So I did some research on how to get both Platforms up and running, and I found Wubi. Seemed like a perfect way to start!However, I downloaded the client, and when Downloading the rest of the Installation software, It just took way too long!On ETA it marked 4 hours at first (sure enough, it took little more than that) but then it gave me a new ETA of 8 HOURS!
Is there any other way to download it? Other than the 1.6 Mb Client file? & For the Desktop. Since I'm formating the HD anyway, What steps should I follow to install both OS on it?
what DVB-T USB tuner should I buy? I expect it to have full support including the remote control operation. Intended use is for Ubuntu with XBMC installed.
View 3 Replies View RelatedI updated ubuntu kernal to latest one, forgot the numbers already. When I restart, it hangs while loading kernal. I usually can choose which kernal to load, but now the 'choosing page' can't even load already.
View 1 Replies View RelatedI had dual OS (Windows XP and ubuntu) in my desktop which was worked fine. I formatted the windows XP OS and Re Installed the same. After do this installation am not getting the option to choose Ubuntu OS.
View 2 Replies View Related